My iPad mini's screen is not responding. But the home and other buttons are still working. It was just working fine yesterday. Is there anything I can do to make it work?
Please, I need help..
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Similar Messages
-
My IPAD Mini touch screen is not responding, it is showing a message icloudBackup but the back up is not happening and the system seems to be hanged?
Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem. -
HT4623 My iPad mini's screen is not responding to any touch.
Tonight when I turned on my iPad mini, it booted up like normal but the screen won't do anything when I touch it to unlock it or try to do anything else. The buttons work but I can't do anything else. Could it be because the operating system needs to be updated or could it be another related issue?
Have you tried a soft-reset to see if it works ok after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
IPad mini touch screen borders not responding
My ipad mini touch screen borders aren't responding and I tried rebooting by holding the sleep and wake button,please help me.
Hey there EMB08,
It sounds like you have noticed that the edges of your screen aren't responding to touch. You should use these steps to help troubleshoot the issue or seek service if needed:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see theService FAQ for your product.
Additional Information
Tip: To isolate an issue related to a portion of the Multi-Touch display, follow these steps:
Open the Maps application and double-tap each corner, then the center, to verify that it zooms in to each section.
If a specific area is affected in another application, note the location and try to verify touch functionality for that location in the Maps application.
On iPhone and iPod touch, you can also use Calculator:
Open the calculator app to test all but the top row of the screen. Press each button on the calculator and verify activity.
To test the area at the top of the screen, rotate the device to change to the scientific calculator and press the buttons in the left or right two rows.
When speaking with a Mac Genius or Service Provider, you can use this information to assist with evaluation of your issue.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I am currently facing trouble when trying to use the standard keyboard commands such as Home/End/Page Up/Page Down on Firefox.
The browser does not respond to the same.
Even the arrow keys take some time to elicit a response.
Please help.You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing]: press F7 to toggle<br />
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"<br />
See http://kb.mozillazine.org/Accessibility_features_of_Firefox<br />
See http://kb.mozillazine.org/accessibility.warn_on_browsewithcaret<br />
In Firefox 3.6 and later versions you can disable the F7 shortcut that toggles caret browsing by setting the pref accessibility.browsewithcaret_shortcut.enabled to false. -
I treid letting it run flat, then charging it but it went back to the black screen. Sometimes the mouse icon can be seen and I can move it but it will vanish sometimes.
Could be a problem with the LCD or it's cable, this seems like a hardware fault. I would go to the Apple store before its to late and before you run out of warranty (you get a 1 year warranty) There no way of fixing this without opening the computer which would void the warranty. If you have ran out of warranty i would go on eBay and look for a inverter, the cable or possibly the LCD apple would be able to tell you what it is without you having warranty and try the repair yourself or you could pay Apples overpriced repair.
-
With ios 8.3 ipad mini apps sometimes do not respond when touched
a new problem occurred with ios 8.3 ipad mini applications sometimes do not respond when touched Fix it in ios 8.4
If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
my iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old
Braunzoes wrote:
my iPad screen is not responding, ...
Try a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Braunzoes wrote:
... whats the best way to clean it ...
How to Clean Apple Products
http://support.apple.com/kb/HT3226
Braunzoes wrote:
... its 2 days old
iPad User Guide iOS 6 -
my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.
You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device? -
My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but it keeps locking up. Help,please!
Thank you for trying to help. I followed your instructions, it took 6 hours to download, and then said it could not solve the problem (something to do with error 9?). It will have to go back to Apple - its only 3 days since it came out of the package and its very disappointing for him. Looks like I have to hang around in the Apple store in Plymouth all tomorrow until they can fix it, or will change it. Thanks for your help.
-
my iphone 4s screen has just turned black but it is still vibrating. I was reading other messages similar and it says to resart phone but holding the home and lock button. However my lock button doesnt work what should i do?
Is it the Home button that doesn't work, or the Power (Sleep/Wake) button? If the Power button works, you can switch it off. Not sure how you have been able to do anything without the Home button working?
Cheers,
GB -
my ipod will not charge or turn on or show any sign and its not jailbroken and i tried holding the home and power button and all that stuff but nothing works please helppppppp
Go through the steps here and see if anything works for you.
iOS: Not responding or does not turn on - Apple Support
You might have to bite the bullet and restore the device if nothing else works. If that doesn't bring it back to life, make an appointment at an Apple Store and let take a look at it. -
On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo). I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.
My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
Appreciate suggestions.
[The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]Is your Yahoo account set up as POP3 or IMAP?
-
Application, once built, shows "Not Responding" in the toolbar, and it doesn't go away
If you have an application that is running with some kind of timeout, (My application will send a message, and wait for a user definable period of time for a reply). If this tine is over 5 seconds, and the user clicks on the application, the app sets its status to "(Not Responding)". This is mirrored on the toolbar.
Once the application begins responding again, the title bar of the app changes back to an active state, although the representation of the app on the tool bar stays in a "(Not Responding)" state.
I have attempted to stop the user click having an effect by setting the cursor to busy and setting the "Click Disable" to TRUE, but this does not help.
Any ideas how to get round this one? Or is it a bug?
Cheers, AlecI must not be explaing myself propperly.
Every application that is open has an instance in the task bar
As you can see here, I am running outlook, labview, firefox and MSN, but don't tell my boss
Somtimes, when windows things an application has crashed it will place the phrase "(Not Responding)" next to it's name in the task bar. It will also place the word "(Not Responding)" In the title bar for the application.
I have written a program that calls a .dll. The function of this .dll is to read incomming data up the RS-232 socket of my PC. I can set a timeout on this, lets say I set it to 1 minute.
The application is running, I call the .dll to read incoming data, then I don't produce any incoming data. The application will wait, up to 60 seconds for some data, but in the mean time, Windows thinks the LabVIEW executable file has crashed, so places the word "(Not responding)" in the taskbar AND in the title bar. At this point I send my data up the 232, the data is received and displayed by the application. At this point Windows forgives LabVIEW and the "(Not Responding)" status is revolked. This phrase is then removed from the title bar, but IS NOT removed from the task bar.
Does anyone know if we have control over this, or should I report it as a bug to National Instruments?
Many thanks guys,
Cheers, Alec -
my iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off can anyone please help ......
hi i m currently in pakistan and there is no apple store here . i will b back to australia after 2 weeks i was wondering if thei can b any fix as i have all my contacts and everything else in my mobile
Maybe you are looking for
-
Hello experts! I am trying to pass value between two pages without page submit. I set item value from first page to session state by dynamic action. Then I am trying to pass this value to second page, I use button which redirects to second page and s
-
How can i locate an i pod touch that was stolen
my ipod touch was stolen. I am trying to figure out how to locate it. help
-
Hide Caption Titlebar causes the window content to be displaced when mousing over certain areas and controls. These areas includes mousing over the left window edge as well as leaving any control on the topmost area (buttons, location bar, search bar
-
Shift key somehow stuck on my 2-week old MBP
Did anyone have this problem before? I turned on my 2-week old uMBP 13" and it wouldn't accept my password! After minutes of frustration, I booted into Single user mode and that was when I realized the Shift key is somehow stuck! Typing will show eve
-
Can we set a variable by assigning another variable to it
Hi, Can we set a variable by assigning another variable to it. If not how can we implement this. Thanks Madhavi