My iPad mini was disable due to wrong password how can It be able again??
My iPad mini was disable due to wrong password how can It be able again??
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.
Similar Messages
-
HT1386 ipad has been disabled due to blocked password, how to solve it?
And iTunes cannot connect to it due to the password trouble. How do I solve it???
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Device disabled after entering wrong passcode -
My iPad has been disabled due to wrong passcode which I have forgotten,How can open it again?I'm so desperate right now
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808 -
My ipad mini was disabled and kept saying connect to itunes how do i do that
my ipad mini was disabled and kept saying connect to itunes how do i do that
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
HT201363 My iPod Touch was disabled due to incorrect password entries. How do I unlock it?
My iPod Touch was disabled due to incorrect password entries. How do I unlock it?
Hi there EllaBella0,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W. -
My i pod 2 gen is disabled due to incorrect password how do i fix this?
my i pod 2 gen is disabled due to incorrect password how do i fix this?
Follow the instructions here:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen -
My iphone & ipad mini are both here w/ me at my home. But the findme app is showing my ipad mini on the other side of town, how can i get that corrected?
Hello Krazyboutgolf,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594
Improving GPS accuracy2,4
GPS accuracy varies depending on the number of visible GPS satellites. Locating all visible satellites can take several minutes, with accuracy gradually increasing over time. Use these tips to improve GPS accuracy:
Ensure the date, time, and time zone are correctly set on the device in Settings > General > Date & Time. If possible, use Set Automatically.
Important: Incorrect settings on your computer can sync to your device. Verify the date, time, and time zone on any computer that syncs with your device.
Restart your device.
Verify that you have a cellular or Wi-Fi network connection. This allows the Assisted GPS (A-GPS) on the device to locate visible GPS satellites faster, in addition to providing initial location information using the Wi-Fi or cellular networks.
Note: Microcells (sometimes called Femtocells) aren't supported with Location Services.
Maintain a clear view of the horizon in several directions. Keep in mind that walls, vehicle roofs, tall buildings, mountains, and other obstructions can block line of sight to GPS satellites. When this occurs, your device will automatically use Wi-Fi or cellular networks to determine your position until the GPS satellites are visible again.
Best of luck,
Mario -
I lost my iPad Mini and I didn't activate iCloud how can I find it ?
I lost my iPad Mini and I didn't activate iCloud how can I find it
Unfortunately, you cannot locate your device if you did not activate "Find My iPhone" on your device.
-
My account was disabled. Why? And how can it be enabled?
I was trying to purchase/download music and got a message that my iTunes account was disabled. Why? And how can it be enabled?
Hi LucindaLeeP,
Thank you for using Apple Support Communities.
To help resolve this issue where you got an error that your Apple ID was disabled for security seasons, please follow the steps in the article linked to below.
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
Cheers,
Alex H. -
I stop receiving I message in my iPad recently I changed my apple password how can make it work again?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
Cheers, Tom -
How to open an ipad after it is disabled due to wrong password
what to do when i pad is locked due to wrong password entry by kids
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Instructions can be found here.
http://support.apple.com/kb/ht1212
You may need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
Ipad mini blocked after 10 times wrong password. How to reset
After 10 times the ipad is blocked
I downloaded itunes on my windows(7) laptop but didn't make a back up on this computer., no result
When connected to the laptop it comes with: device blocked because of wrong password, the other time error 0eX8000084.
I removed everything from Apple and downloded again Itunes.
Have anybody a solution for my problem?iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Cheers, Tom  -
Hi all,
I got logged out of my ipad indefinitely due to forgotten password. It says to connect to itunes and I did so but was prompted a message that says itunes cant connect to the locked Ipad and I would need to input a password using the device but the device is locked!
Appreciate any help or answers for my problem.
Many thanks!Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
How can i connect ipad mini wifi+celluar to 2g internet plan
Hello Sir!
After weeks of testing, i found the solution of my question. It´s quiet simply!!
1º iPhone (3G Internet acess) connected to Mac mini by USB or BlueTooth or WiFi.
2ª in Mac mini must be activated in "Preferencias", "Compartir", the option "Compartir Internet",
"Compartir Conexión desde": iPhone USB or Bluetooth PAN
"Con otros Ordenadores vía": Ethernet
3º Ethernet cable must be connected from Mac mini to Time Capsule !!
4º In Time Capsule "Internet": connect by: DHCP
"Network": bridged
Nothing more!!! Sooooo simply!!
After this, Windows XP SP3 connect without problem over TC´s WiFi or Ethernet to the Internet!
Also other Devices like IPad, or other iPhone, etc.
Of course it can be a created a WiFi connection (PPP) between the iPhone and the Mac
and it´s working to.
But ALWAYS, by changing the connection mode, must be changed the Thethering mode.
In- and Out-Going!
Thank you for your help, no I made me a "small" TC expert...lol -
My supervised Ipad minis won't refresh with configurator so how can I install apps?
I have a set of 6 iPad minis, orginally set up by the company we purchased them from. We have connected them to the macbook via a sync unit and they wont refresh in configurator. I can't install any apps. But it all work fine for the supervised iPods set up at the same time.
Any ideas?Erase All Content and Settings completely erases the iPad and returns it to the factory settings, as a new iPad out of the box.
Maybe you are looking for
-
How can I use more than one Data Provider in my web Apps
I am trying to use two different data provider in my web apps to run two different queries from the same table ,the data provider A is working correctly but when I attempt to run data provider B ,It display an error page ,here is the error message :
-
When I try to login to FB now, I get a website that takes over Firefox - WebSpy, or something like that. I already changed my email passwords. When WebSpy takes over, I have to quit Firefox. I'm not using FB right now, until I get this sorted out. It
-
How to import a single schema into multiple target schema?
Hi, I want to import a schema named sd from my source database to my target database in schema sd1 and sd2. I have tried using the following impdp parameter which is throwing error :- impdp system/system schemas=sd remap_schema=sd:sd1,sd:sd2 directo
-
Alternative for Visual FoxPro on OS X?
Does anyone knows any alternative for Visual FoxPro on OS X which can run simple commands, because I do not have any server and I do not need to work on whole programs?
-
Dear all, I tried to raise a sales order for a material(FERT),.after sales order i could able to do picking.At PGI level an error is coming that "Valuated stock becomes negative:136 " I have not created any negative stock. Available stock is not rest