My IPad Retnia does not charge when plugged in using the USB from my computer to car adapter, how can I fix this to be able to have flexibility in charging?

When I plug me IPad into the USB connector to my laptop or into my car charger, it show as not charging. How can I fix this so that I can charge my Pad in these settings?

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
And this - Unplug the charger from the iPad and then replug. May resume charging.
Or - Recalibrate the battery. See link below.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Similar Messages

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?

If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool.

I have several pics that when I click on them another photo comes up. when I click and drag the one underneath comes out but when I drop it the other photo is over top again. How can I fix this?

I have several pics in my iphoto library that have shown up in my folders with the original photo laid underneath it. How do I seperate them?

You don't already have a back up?
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
With the back up? Nothing unless things get worse after the fix. If they do, restore from the back up.
Regards
TD

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

same thing happened to my S5. We're beyond frustrated.

I've upgraded my firefox into 6.0 version.. when i want to play cityville from facebook it missing the en-US.xml and gameSettings.xml.. how can i fix this problem..??

when i started my cityville from facebook the loading progress stopped at 73%.. when it stop i need to download file en-US.xml and gameSettings.xml
this is the download URL for gameSettings.xml : http://cityvillefb.static.zgncdn.com/54988/gameSettings.xml.z
and this is the download URL for en-US.xml :
http://cityvillefb.static.zgncdn.com/54988/en_US.xml.z
when i used version 5.0.1 i never met any problem like this..!!
and i already use adobe flash player higher than version 10
so how can i fix this problem..??

Hi Scott,
in SDIXML_DATA_TO_DOM you can only pass the name of root node, so you can not assign attribute xmlns to root node (<Data xmlns="ServiceNet">) ... unless you build the xml document from scratch (without SDIXML_DATA_TO_DOM)
when using your sample code (without sale) I get xml without <item>
SDIXML_DATA_TO_DOM => SDIXML_DOM_TO_SCREEN::
<?xml version="1.0" encoding="utf-8" ?>
- <Data>
<LV_XMINS>xmlns="DUMMY FIELD</LV_XMINS>
<BATCHDATETIME>2009-11-13T12:05:58</BATCHDATETIME>
</Data>
regards, Karsten

I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

keokipineapples schrieb:
I do have all of my files I am working on located on an external drive. I plan to transfer them directly to the hard drive
Transfer them to your harddisk immediately.
External drives are not offiially supported and the source of errors of all kinds including complete loss of files.
Illustrator support for networks and removable media

My daughter changed the password on her ipod touch and it will not allow her to put letters in so therefore she is locked out! how can we fix this

My daughter has changed her ipod touch password and it will not allow her to put in letters so therefore she is locked out! How can she fix this?

Connect the iPod to its syncing computer and restore via iTunes. If iTunes asks for the passcode and you can't enter the passcode or yu do not have the syncing computer, place the iPod in recovery mode and then restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

The conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?

the conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?

try to exit out of the youtube app with the multitasking feature. if this doesnt work then try to do a manual restart by holding down the home and power/sleep button all the way past the "slide to unlock" screen until the ipod will power off and the apple symbol will appear when the ipod tuens back on

HT201412 Hi , my Ipod touch4 not turning on even not connecting to computer... How can i fix this problem !!!! plz

Hi , my Ipod touch4 not turning on even not connecting to computer... How can i fix this problem !!!! plz

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

HT4211 I just updated my iPad 2 to iOS 7 and whenever I try to type on the keyboard screen, it takes several seconds to acknowledge the key press. It really is slow.How can I fix this?

I just updated my iPad 2 to iOS 7 and whenever I try to type on the keyboard screen, it takes several seconds to acknowledge the key press. It really is slow.How can I fix this?

Settings>General>Reset>Reset All Settings

When i move my wireless mouse, the whole screen on the computer moves...how can i fix this?

When i move my wireless mouse the whole computer screen moves. How can I fix this?

Welcome to the Apple Support Communities
It looks like zoom is turned on. To turn it off, open System Preferences > Universal Access, and turn Zoom off

Hello, I was going to have my presentation on my macbook air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.

Hello, I was going to have my presentation on my MacBook Air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.

Your MacBook is using the big screen as the Presenter Display, and the MacBook Air display as the Show display. Tap the 'x' key to swap them during the show.
Here is more information about using the Presenter Display.

My IPad Retnia does not charge when plugged in using the USB from my computer to car adapter, how can I fix this to be able to have flexibility in charging?

Similar Messages

Maybe you are looking for