My iPad says "iPad is disabled connect to itunes", but when I go through the restoration process it fails and still says the same thing. Help me please!!!!
I need some helpful instructions on how to get my iPad back to normal because it says iPad is disabled connect to itunes. I've gone through the restoration process many times and it does not work. The iPad just seems to fail when its almost done restoring. Much help is needed please!
Hi LittleKritter13,
Thanks for visiting Apple Support Communities.
I recommend the steps in this article if your iPad does not complete the restore process:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
If the issue persists, the method in this article may also help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy
Similar Messages
-
My iPad is disabled, connect to iTune, but when i connect to iTune, iTune showing to allow access please respond on iPad. but in long time it is not showing on device list of iTunes.
can any one help me.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
~~~~~~~~~~~~~
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
windows 8.1 itunes wont recognize ipad
https://discussions.apple.com/thread/5697247?start=0&tstart=0
Look at the solution in this link
https://discussions.apple.com/thread/5697247?start=75&tstart=0
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
Cheers, Tom -
s
Force your iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
on my ipad it says ipad is disabled connect to itunes but i try and connect it to itunes and says i needvto wright the password in the ipad first but cant help please
I have the same problem with my ipod touch ... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????
Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
TS1368 my ipad has a message " ipad is disabled" connect to itunes but I cant connect to itunes
I have an Ipad and my 3 yr old pushed the password so many times and now it has a message on it Ipad is disabled connect to itunes but I cant connect to Itunes because my Ipad has never been connected to my computer. Is there anything I can do without loosing my pictures.
First try to recover your original password.ID so you can redownload iTunes purchases
iTunes Store: Retrieving and changing passwords (Apple ID)
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed but the ipod is still locked. what do i do?
http://support.apple.com/kb/HT1212
-
my ipod says "ipod disabled connect to itunes" but when i connect it says i have to connect to itunes bu twhen i connect it say i have to unlock it first but there is no option to unlock it the slide bar is gone what do i do?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
MY iPod touch says iPod I'd disabled, connect to iTunes, but it is green at the top instead of red. It won't allow me to slide bar to open screen or nothing. I tried to connect to iTunes and a message appears and says iTunes cannot find my device must have pass code to continue. But I can't do anything on the iPod at all. What can I do to fix this?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My ipad is flat and when I plug it in to charge it just repeatedly turns on and then turns off but isn't charging. I tried to plug into itunes but it just goes through the same ritual and can't maintain connection to itunes. What should I do ?
1. Reset iPad
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush -
My Ipod is locked since my daughter tried too many times trying to put the password. Now it says " iPod is disabled" connect to iTunes, but when I connect to iTunes it says "Please enter the password to access"
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad which is my working tool.
What should I do?Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?
-
ipad is disabled, how can i un-disable it? The message on the iPad says connect to iTunes. nothing happens. what can i do?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
this is the second time i have forgotten my passcode to my ipod touch, the first time i had no problem with resetting everything, it worked fine, this time it says ipod is disabled connect to itunes, so i plug it into my laptop and i sit there staring at the side bar on itunes till it comes up with my ipod, but it doesn't, when i do this on another computer it lets me restore it, but then it stops halfway and said cannot do this since ipod is locked with a passcode, please enter the passcode and try again, but if i cant get into it how can i put in my passcode? is there any way that i can find out my passcode, or any other way i can reset my ipod
its an ipod touch 4th generationOptions for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/ -
My child has put in the wrong password on my phone multiple times, my iPhone now say "iPhone has been disabled connect to iTunes" When I hook my phone up to iTunes, iTunes then says that my iPhone can not be hooked up to iTunes because it has a password on it, but will not allow me to put in a password because the disabled message is still showing. What is the next step?
You may need to put the iPhone into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the phone and restore/resync your content to it.
Maybe you are looking for
-
Batch wise stock for a Purchase order
Here, i am receiving the goods from the customer for jobwork, while receiving the material (cloth) itself i wont receive the design what i have to print on the material.(For eg customer will send me some 5000 mtrs, he wont mention the design for that
-
In FCP 7, when I try to export a project that plays fine in the timeline and has no offline indications in the browser, get an error message that files are offline. Running reconnect media has no effect. Project continues to play but not export and
-
I have SCVMM 2012 R2 installed with Update Rollup 4. High availability of VMM management servers is configured, but there’s no HA configured for SQL machine. Last night my all physical machines went suddenly shutdown due to UPS issue. Now when I am s
-
How to fix black borders around transparent PNG files?
Hello, Recently, iMovie has started putting black borders around transparent PNGs. How can I fix this? http://img19.imageshack.us/img19/4668/picture9bt.png
-
When I create a Alias to a networked storage "watch folder" that a PC box is suppose to pick up the alias registers as 0kb and when I try to open the file on the PC in notepad nothing comes up. So why are Mac alias's not readable by PC and how do I g