My Ipad Screen got struck and Ipad is not working .On using updated IOS 7

My Ipad Screen got struck and Ipad is not working and not allowing to shutdown also.
Only SIRI is working. and that also not able to open any app. Today Morning I updated IOS 7. It was working fine for a while. WHen I tried to Minimize one of the app using fingers by multi touch  it got struct. Now neither app closed completely not screen is moving. Just got struck.
Please check regarding this issue and provide me solution

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

  • I'm trying to sync Contacts between my iMac ans my iPad 2 via iCloud and it's not working. In both devices, the option to sync Contacts is seleted. What is happening and how to sync these data?

    I'm trying to sync Contacts between my iMac ans my iPad 2 via iCloud and it's not working. In both devices, the option to sync Contacts is seleted. What is happening and how to sync these data?

    This is the ipod touch forum

  • HT4759 I've got 4 iPhones that got stolen and I could not locate then using the "  find my Iphone App". How can I get them back?

    I've got 4 iPhones that got stolen and I could not locate then using the "  find my Iphone App". How can I get them back?

    only way is if the police find it I suppose

  • My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

    My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

    Yes it does, although I wa a minute faster than you. To see if someone is parroting you, or that they just posted at the same time, look at the head of the post and it will show you the data and time of the post and who they were responding to. Looking at that first saves some misinformation in future posting.
    You'll see some posts where there will be 5 posts all in the same minute sometimes. Answer posts late at night and you won't see as many.
    BTW, I clicked the Like button on your post where you gave the link for the users manual.

  • My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

    My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

    Ouch, doesn't sound good, but...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

    My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

    Try resetting the Yahoo password. Yahoo not infrequently has problems.

  • My ipad mini is disabled and password is not working

    Ipad mini disabled and password is not working. Unable to get serial because can't unlock ipad. Have not previously synced with a computer.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1212 ipad mini is frozen and home button not working

    my ipad mini home button is frozen and will not turn off.  I have tried holding the home button and of/off button for more than a minute and will not respond or shutdown.

    If the home button is not working, then the best option is a visit to an Apple store genius bar to have the techs check it out.

  • Just upgraded to iOS5 on iPad. Music app and mail does not work properly.

    Just upgraded iPad2 to iOS5. Music app does not work properly. When I select a song to play, it plays a different song. Sometimes, it just stops playing songs, other times, it shuffles songs.
    Not sure whats going on.
    Worked fine using iOS4.3.5.
    Synced the iPad to iCloud. enabled mail. It shows under settings that the iCloud mail is setup, but the mail does not appear in the mail app. Not sure whats happening with these functions on iOS5.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • White Screen of Death and Wipe Did Not Work

    Hello - 
    I purchased my Blackberry 8900 a year ago and TMobile is my carrier.  
    I experienced a white screen of death on my Blackberry 8900 last nite while talking on it. It just dropped the call and the screen went white.  I shut it off then back on, white screen appeared after reboot.  I pulled the battery and left it out for 15 min, inserted it again and rebooted - still white. 
    I searched online and found a lot of info. My phone is recognized by the Desktop Manager software.  I was able to back up all of my data and applications.  I deleted all of the data on my phone through the DM as well (or thought I did - I can't tell if it worked or not).  I downloaded the current version of the OS from TMobile for reinstallation.  
    I downloaded JL Cmder to fully wipe the phone.  JL Cmder did not work on my home machine (Win 7) but I finally got it to work on my work machine (Vista) today.  
    I selected the wipe option (4) and JL Cmder successfully connected with the phone.  The phone rebooted and I got happy, but on phone reboot I did NOT get the "507" error all of the how-to sites say I'm supposed to get.  The phone rebooted with the same white screen and no error message.   I've run the wipe command from JL Cmder a few times on the phone and it connects, reboots but I still get the white screen with no error message.  
    Is there anything else I need to do to get this 507 error?  Or is my phone really dead?   
    I want to do what I can before I shell out more $$ for another phone.  
    Thanks in advance. 

    Thank you for your replies...
    jmrmb80 - Yes the device is still recognized by the Desktop Manager.  I reloaded the OS on it this morning and the App Loader says it was successful - but on reboot the white screen loads and thats it. 
    billrobinson - I haven't dropped the phone since I bought it.  I wish I had b/c then I could blame it on something.  My friends drop their phones all the time, spill stuff on them etc.... and I do nothing - and my phone blows up  

  • Screen locking up and auto rotation not working on phone wakeup

    Since updating to iOS8 my iPhone 5 and 5s will lock up when waking the phone.  I also have noticed that the screen rotation does not work riight away and is sluggish.  Certain apps tend to freeze which could be that they need an update themselves.  It is a shame that Apple has resorted to using its customers as beta testers for their software.  As a die hard Apple fan it is getting harder to stay true to the company.  Apple should be leading not playing catch up which is why I think theses major software issues develop.

    Model Name: P55W-B5112
    Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund.  It should work perfectly brand new without having to fuss around. 

  • So my home button stopped working due to water damage. I put it in the microwave(for real no joke) so the water can evaporate. 2 seconds in and the screen sparked blue and now its not working any suggestions on helping me fix it?

    Please help me guys itll be a great help

    Hey Peter, I think your missing the big picture. Your iPod is past repair, corrosion, is a real issue with water damage, but your problem took a turn for the worst when you attempted to use a microwave to dry it out. I see you found another post from July 2012, where someone else tried to nuke there iPod, and got the same results you have-- a dead iPod. The blue sparks, burnt smell and still not working all confirms one thing... Your iPod is not repairable. What the water didn't damage the microwave did. By attempting to microwave, you for all intensive purposes hit your iPod with an EMP, (Electro-Magnetic Pulse), in the first split second you overloaded the workings of your iPod and burned it up! There is is no way of known which circuits and components have been damaged and to what extend. You may be able to get a refurbished iPod, but it is unclear that Apple will allow it, because of the type of damage, it's not like this was an accident, you deliberately put it in the microwave in a misguided attempt to dry it out. when the microwave turned on it hit ever chip, diode, capacitor etc. with more power than it was designed to handle, in short; you baked it, burned it up, fried it, call it what you want, but it's not going to work! To attempt to repair is a meaningless gesture, (and probably will cost more than it's worth), chalk this one up as bad ideas 101-- learn from it, move on, and get yourself a new iPod. Hope this helps, Good luck. Cheers.

  • Lighting cables and adapters are not working after the last iOS 7 update.

    Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
    I have an iPhone 5 funning iOS 7.0.2.
    I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
    I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

    I had the same bug. Powering off the phone and back on resolved the issue

  • MacBook Air is just flashing on and off but not working after trying updates

    This morning I got notification that I was supposed to update my MacBook Air with both update for iTunes and update for Firefox. 
    I hit yes to both.
    Now I am just getting a constant flashing on and off and blank screen alternating with brief picture of the Apple with bar underneath it.
    Have turned on and off several times and still won't work.
    Ideas/

    Welcome to the Apple Support Communities
    I don't think that the iTunes and Firefox updates could do this, but it looks like the logic board is damaged. What happens when you press Shift key while your Mac is starting?

Maybe you are looking for