My iPad screen has stopped rotating after upgrading to ios8. I have already tried the screen rotation lock option

I Upgraded to ios8 yesterday. Since then my screen has stopped rotat

Hi ismailsurve,
There are a few things to check if your screen isn't rotating correctly.
iOS: Screen does not rotate
Note it says "iPhone or iPod touch", but it applies to the iPad as well.
Best Regards,
Nubz

Similar Messages

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Why does my cable selfie stick stop working after upgrading to iOS8.2?!

    I have an iPhone 6. My cable selfie stick stopped working after upgrading to iOS8.2.
    My friend's iPhone 6 is still iOS8.1, and the seflie stick works fine for him!
    How do I solve this?

    Are you using the paintbrush and have a gradient assigned to a stroke in CS6?
    Double click on paintbrush, and enable keep selected.
    If not give us a better explanation of what tool & settings you are using. (eg: blob brush, shape builder)

  • How do I remove the spotlight effect on the bottom of my screen? I am running OS 7 on a Macbook. I have already tried the Shift Control Eject.

    How do I remove the spotlight effect on the bottom of my screen? I have already tried the Shift+Control+Eject.

    Could you please post a screen shot - not sure what you mean by spotlight effect.

  • My iPod shuts off repeatedly when using the Nike running app. Have already tried the headphones solution that Apple has recommended. Can anyone help?

    My iPod shuts off repeatedly when using the Nike running app. Have already tried the headphones solution that Apple has recommended. Can anyone help?

    Using the 5th generation iPod. Purchased it a few months ago before the new one was launched. Yes the workout randomly ends when I am no where near the time or distance I have programmed in. I keep tried to restart the workout and the same thing keeps happening over and over again. I figured it may have been the headphones but I have even tried holding the headphone connection in place, and different headphones as well and it continues to happen.

  • My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

    My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
    Please help!

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • IPad won't update apps after upgrading to ios8 ?

    Hello,
    I have been having touble with my apps getting updated.  This seemed to have started after I downloaded the ios 8 on my iPad.  I didn't have the problem before. I had 15 updates its now down to 8 but I have been waiting for the past 4 days for it to complete.  It keep stalling/pausing and I have to restart it.  I have tried to turn the iPad off and on.  I don't want to have to uninstall the apps and redo all of them.  Is there something wrong with my it because of the iOS 8 update?  Is there a recommendation or a resolution to solve the issue.  Thank you

    Hello ukgals,
    Thank you for Apple Support Communities.
    If you are running into issues upgrading when updating over-the-air, this article can help you resolve it. 
    Resolve issues with an over-the-air iOS update - Apple Support
    Regards,
    Jeff D. 

  • Hi,catalyst control centre has stopped working after upgrading to windows 8 .

    Hi,
    i have a hp envy-6 notebook pc(Product number: B4P24PA#ACJ,Serial number:  [Personal Information Removed] , which comes with windows 7 home basic! after upgrading to Windows 8 Pro 64-bit operating system ,my catalyst control centre ,host application has stopped workiing .
    i have tried almost everything i could do but the problem still persists
    on every time restarting pc it displays the above error message.
    regards
    abhishek rao

    Hi,
    Have you checked in the Device Manager to see if all drivers are installed since upgrading? (look for yellow exclamation points)
    Uninstall the AMD driver and catalyst control center. Install the version  located in the download section of the web support portal for your sleekbook.It will install both driver (intel and AMD) and also switchable graphics capability if it previously existed.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • ITunes has stopped working after upgrading to latest version.......

    I recently upgraded my iTunes software but ever since I did that, I keep getting an error message that says, "iTunes has stopped working". I have included the info from the error. I am using Windows 7 64-Bit. I hope someone can help me with this. I miss my iTunes.
    Problem signature:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.2.0.34
    Application Timestamp: 4d6dd34e
    Fault Module Name: icuuc40.dll
    Fault Module Version: 4.0.0.3207
    Fault Module Timestamp: 4d3b6a8e
    Exception Offset: 00073335
    Exception Code: c0000409
    Exception Data: 00000000
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: e043
    Additional Information 2: e0436f8e95924b8cc03f3b6e8fbccbe6
    Additional Information 3: 3521
    Additional Information 4: 352153d1c7a000354229557e718745c3
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt

    Hi and welcome to Apple Discussions, KLH.
    There are a few threads discussing this issue, including this one -> http://discussions.apple.com/thread.jspa?threadID=2771714
    That thread and a few others mention downloading the DLL from another site. Heres a direct link to the workaround/fix -> http://discussions.apple.com/messageview.jspa?messageID=13162938&stqc=true
    Also, there was a few posts asking what time zone people are in. What timezone are you in and is the computer updated?
    WTH.

  • AirDrop has stopped working after upgrading to Yosemite

    Hi ,
    We have recently upgraded OS to Yosemite and after that our AirDrop stopped working .. could some one please help us to get this fixed .
    So far we have enabled/checked the Bluetooth sharing , file sharing etc but that did not help .
    Any help is appreciated .

    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support

  • TS2634 My iPad Charger has stopped working after plugging into MacBook Air?

    Hello there,
    I have owned my iPad Mini for about 2 months now, and the charger has stopped working. It sometimes works on my MacBook Air, but often I get a popup on my computer saying, "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again." I have tried plugging my iPad into a wall charger, but it still does not charge. There is a small hole and the first part of the cable from the iPad is a bit twisted. Is there any way of fixing this, or do I have to buy another?

    Computer USB ports often do not provide enough power to charge an iPad efficiently. The best way to charge an iPad is with the charger that came with the iPad.
    Sounds like your cable is damaged too and needs to be replaced. My suggestion would be to buy two so that you have a backup. If your iPad has a lightning connector be sure to buy a name brand cable, either Apple or another well known brand. Do not buy cheap knockoff cables on eBay and they may not be certified to work with an iPad and you'll get an error message about that when you try to use them.

  • My ipads screen has gone black you can see when it turns on because the screen glows but thats it it wont come on at all?

    My iPads screen has gone black.  Ive tried to turn fixing it by holding in sleep and home button for 15 seconds but it hasnt worked
    what else can i do??

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My iPhone 6 will not auto rotate after installation of version 8.0.2. The auto rotate lock is off in settings and in the Kindle app, but nothing will go to landscape.

    Since the installation of 8.0.2 my iPhone 6 will not auto rotate in any app. I have locked/unlocked the feature in settings several times using the command bar but to no avail. I read using the Kindle app and it also is locked in portrait whether the lock is on or off.

    Edselbe wrote:
    Your auto lock got turned on. Swipe up on the screen and tap the upper right icon. This will allow it to work again!
    Actually, the OP tried that (six months ago) and it didn't work. They resolved the issue (six months ago) by updating their system software (six months ago).

  • My ipod goes into pause mode after about 20 seconds, I have to touch the screen as it starts to fade out to keep it on

    My ipod nano is fully charged and while playing will automatically go into pause mode as the light starts to dim it eventually stops.  If I touch the screen before it blacks out it will continue to play.  It will play continuously if I am charging it into an electrical outlet

    I have the same problem with my new nano.  On one forum, there was a recommendation to restore, which will wipe all the music.  A second forum suggested the was an inherent problem in the 1.1 firmware and suggested a roll-back to 1.0, which sounds painful as well.  Any clarification will be greatly appreciated

  • IPad only app stop working after upgrading iOS

    After I updating my iOS from 7 to 8.1 one of my apps not loading. The only thing that as change with app that's not loading is it went from a Single-Folio to a Multii-Folio app subscription. But was working fine in iOS 7 on iPad
         Error: Cannot install item, please restart the app and download your purchase again.
    Any help fixing this problem will be appreciated!

    Bob, I designed the iPad app version of a publication called NASA Spinoff. The first version 2012 was uploaded May 2013 as a Single-Folio  and then we made  a Multii-Folio app in Aug 2014 for the 2013 version its a annual pub. We have 2 versions now and working this years app.
    As a NASA contracter, NASA creates the apps from folios that I upload to NASA folio producer. All was well until they created the Multii-Folio.
    I think its the way the Multii-Folio app setup.  It was working in iOS 7
    Link:
    https://itunes.apple.com/us/app/nasa-spinoff-2013/id904717045?mt=8

Maybe you are looking for

  • W2012R2 - A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.

    Hi all. I have stanalone offline RootCA, and enterprise domain SubCA on DC on Windows 2012 server. I have Windows 2003 Terminal Server, users logon to TS via smart cards - and this work fine. Now I added Windows server 2012 as "Terminal Server". Now

  • Any ideas for a Birthday wishes video????

    Howdy folks, Thanks for taking a peak at this post. No technical problems--as of yet, but just wanted to hear from the crowd on some creativity with the apps. Any ideas for a background/slate to place behind people giving their best wishes to the bir

  • BAPI_PO_CREATE1 - In case of account assignment, please enter acc. assignment data for item

    Hi, Currently I'm facing an error "In case of account assignment, please enter acc. assignment data for item" when create a Purchase Order using BAPI_PO_CREATE1. The condition of the data that need to pump into the system is that this PO is an open i

  • ITunes and Classical Music

    I've got a question about iTunes and classical-music playback. The symphonies, concertos, etc. that I've got are all properly tracked (1 of 4, 2 of 4, etc.) and albumed (1 of 1, etc.). The problem that's driving me nuts comes when I play them on the

  • Thanks Verizon, you made it easy

    One month and I am out of here. Verizon does not care about it customers or anyone else. I am porting my number out in 2 weeks. Can't even get a straight answer, Customer Service is rude and flat out lies to your face about everything. Goodbye Verizo