My ipad screen is not responding to my touch

I can charge my ipad and it will vibrate and i can also print screen so i know my ipad is turned on but i cant see the home page.
It wont respond to my touch. Ive tried turning it off but it wont respond. Ive tried restarting it but it wont restart. Ive put it on charge and it will vibrate so i know its charging but i cant see anything on the homepage. Ive tried everything. Anyone got an idea on what i can do next. My ipad is a 3rd generation ipad. Please and thank you

Nadiya321 wrote:
. Ive tried everything.
Have you tried this... Reset  ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring  >  http://support.apple.com/kb/HT1414

Similar Messages

  • My ipad is locked and it tells me to update my icloud but the screen is not responding to my touch?

    How do I get my screen unlocked so that I can update my ipad.  The screen is not responding to my touch, instead it is telling me... " This ipad hasnt been backed up in  12 weeks. Backups happen when this ipad is plugged in, locked and connnected to wi-fi".  Does this mean that I cant use this untill it is all done backing everything up? And how do I begin to use it since it says its locked?

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    After it boots up again, you will be able to use the iPad. You should backup the iPad like the message is telling you to do.

  • HT201263 hi, my ipad screen is not responding: nothing appears. How can I restore it?

    /hi
    my ipad screen is not responding. Nothing appears. It seems to turn on but nothing appears on screen.
    maybe my niece of # years old that played with it entered too many tomes wrong passcode.
    Anyway, how can I restaure it?
    The itunes doesn't recognize my ipad since I can t enter the password.
    Please help. I am desesperated
    Thanks
    Elinor

    -reset the device will not get the passcode to go away
    you can restore by putting it in dfu you mode. plug it in to the computer pull up itunes, then hold down the home button and the power button at the same time, when you see the apple logo let go of the power but keep holding the home button in tell you get a message to restore

  • My ipad screen is not responding meaning i can not use it, is there somthing i can do to fix it??, my ipad screen is not responding meaning i can not use it, is there somthing i can do to fix it??

    My Ipad scree is not responding to my touch, meaning i can not open and use my Ipad2, can anyone help??

    Make Sure iOS is updated to the latest version
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • My iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old

    my iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old

    Braunzoes wrote:
    my iPad screen is not responding, ...
    Try a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Braunzoes wrote:
    ... whats the best way to clean it ...
    How to Clean Apple Products
    http://support.apple.com/kb/HT3226
    Braunzoes wrote:
    ... its 2 days old
    iPad User Guide iOS 6

  • This morning, my iPad screen didn't respond to my touch commands. It displays mail, but I can't move the screen, can't delete an incoming item. Nothing. All the other screens work normally -- just no response to mail.

    This morning, my iPad screen didn't respond to my touch commands. It displays mail, but I can't move the screen, can't delete an incoming item. Nothing. All the other screens work normally -- just no response to mail.

    Have you tried closing the Mail app completely ? From the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My phone freezes and the touch screen does not respond to my touch.

    My i-phone 4 has been freezing up on me as of late.  The buttons will still work but the touch screen does not respond to my touch.
    Is my phone hooped or can I do sometinhg to fix it?

    First thing to try is a reboot of your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPhone restart. See if that fixes your problem.

  • My touchSmart tm2-2150us screen is not responding to my touch or pen

    MY screen is not responding to my touch . i also get a Notification   "USB device not recognized" i try updating that USB and dosent work. wHAT can i do?

    Okay, in that case you may try re-installing the chipset driver and the touch driver from the following links and check if the issue has been resolved. The following are the links:
    Chipset driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-86107-1&cc=us&dlc=en&lc=en&...=
    Touch driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84031-1&cc=us&dlc=en&lc=en&...=
    If the issue is not resolved, it would be better to complete a full system recovery after taking backup of all your data. Issues as such would also occur if there are driver conflicts and these can be resolved with the recovery.
    However, as I had mentioned earlier, since you are receiving a "USB device not detected" error, there is a possibility that the hardware is malfunctioning. If recovery is also not resolving the issue then you may need to get the unit serviced at an authorized HP service provider.
    I work for HP.

  • IPad screen bottom not responding

    The bottom of my iPad 2 is completely dead.  about 1.5cm of the screen is not responding to touch.  Each time i want to access that part of the screen I need to flip the iPad around.  All applications, battery, etc work just fine but it is becoming annoying having to flip the iPad over and over again with some application just to press a button or type something.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    Not likely that the abce will help but it is always a good first thing to try. I really think though you'll need to have you iPad checked out by a technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My ipad screen is not responding in the top half of the screen and it reset by itself it pushes buttons by itself and now i can get out of the set up phase

    i neeed help my ipad screen is non responsive

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My screen does not respond to any touch commands on new 4S

    The screen on my new 4S does not respond to swiping in order to configure.  In addition, when I try to turn it off, it will not respond to cancel or swiping.  I have tried to reset to no avail.  Is there something else to try?

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • My iPad screen is not working when I touch it

    I can turn it on and it's not frozen but my screen won't work when I touch it and I didn't drop it .it just happened

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • My iPad screen is not responding

    i connected my iPad to iTunes.  Upon connection itunes asked for my passcode, however i cant enter it because the screen isnt responding. Please help thanks

    You may need to restore your iPad. Read this support article and make sure you have tried all of these steps first.
    http://support.apple.com/kb/TS3281
    Backup the iPad before restoring if that is what you need to do.

  • My ipad screen is not responding. Any ideas?

    Hi,
    I was using my ipad fine yesterday and switched on the do not disturb when I went to sleep.
    When I woke up the screen wont do anything. It unlocks when I open my leather cover but the touch screen isnt doing anything. Its fully updated on itunes.
    Any ideas on how to fix it? I have tried switching it off but not even the slider works.
    Thanks for reading
    R

    See if this will fix it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My ipad is spamming touches in some place in screen and not respond to my touchs

    My ipad is spamming a fast touchs in one place in the screen and it really annoys
    but when i lock and unlock the device the touch disapper and it gets normal
    but after a while this touch spam begins .. Tried hard reboot. But useless ..

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

Maybe you are looking for

  • How do I move my pic from one app to another?

    How do can I move pics from one app to another?

  • Getting Ora 01843  not a Valid month Error

    Hi I was trying to assign the data in MM/DD/YY format from a date value '09/25/2009'.. I cannot Obain the result i always get this ORA-01843: not a valid month May i ask you kindly to help me out here. Below is the code Snippet; DECLARE lv_date DATE;

  • Igoogle wont stay signed on

    iGoogle is my home page and after closing Firefox it must sign off since I have to sign in when I open Firefox again. I ahve Safari & IE 9 & they dont do this. I'm using 3.6.2 as the new 4 won't display some gadgets on iGoogle, I have to go all the w

  • AP - One Check for Vendor from two Company Codes

    Our Company would like to issue one check  for a vendor in two company codes. Configuration has the paying company code = sending company code. So the payment proposal will want to create two checks, one for each company code. Question --- Is there a

  • Event triggered for checkbox in cl_gui_alv_grid

    Hi All , I have a requirement like ,i give PO number on selection-screen.After execution, the items should be displayed on second screen ,which has some options on the top like before GR or after GR .(custom screen designed with cl_gui_alv_grid for d