My iPad screen suddenly started displaying weird colors

Hello, well I was using Twitter on my iPad 3 when suddenly the screen started to got really weird.
(The picture: https://twitter.com/rgonzalezagui/status/469652534236561408)
I'm not sure if the pixels are dead now, I have never ever dropped my iPad, I have never had an accident with it. Please help me.

First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again.  Also, if you have IOS-7, read this.

Similar Messages

  • My Imac desktop screen suddenly started to change colors and pattern appeared

    My Imac desktop screen started to "flip out", things were moving around and strange patterns filled everything on the screen. After a minute it stopped. Is this a warning sign of a hard drive meltdown?

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.
    BTW, 10.6.1?

  • My iPad suddenly started displaying "Searching" up in the top left corner and now the ipad reboots itself after about 2-5 minutes.

    My iPad suddenly started displaying "searching" up in the top left corner of the screen and the wifi symbol is next to it and I am connected to the wifi. Prior to last weekend it used to display Verizon and everything was fine. After about 2-5 minutes the iPad suddenly reboots itself. Can anyone assist with this. Thank you

    Have you tried rebooting the iPad?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • IPad has suddenly started showing all images as "negatives"?? How do I get it back to normal??

    iPad has suddenly started showing all images as "negatives"?? How do I get it back to normal??

    Settings > General > Accessibility > Invert Colors turn Off.

  • My iPad screen is not displaying apps or app screens.

    Hello,
    My iPad screen is not displaying any apps at all. There are no app screens - it isn't that I am not swiping left. My wallpaper is still showing, and the only actions I can perform is pulling down the notification screen and pulling up the convenience bar. It doesn't lock so I can't restart it from iTunes. What is happening?
    I have an iPad with iOS 8.1.1
    Thanks

    Try a reset. Press and hold both the Home and power buttons until the Apple logo appears. Release both fingers. Wait until your iPad starts on it's own.
    If the apps are still missing  tell Siri to open settings. Then go to general> reset> reset home screen layout.
    Also you can ask Siri to open a app to make sure they are still there.

  • My ipads screen is shakey and the colors are messed up

    my ipads screen is shakey and the colors are messed up

    If the device screen looks inverted, try triple tapping your home button.  OR, you could tap settings, general, accessibility, and make sure invert colors is off.  Not sure what you mean about the screen being shaky, unless you tapped too long on the screen, and the icons are wiggling.  In which case tapping the home button will resolve that as well.

  • My ipad screen suddenly went 2/3 black with stripes. is my ipad ruined?

    My ipad screen suddenly went 2/3 black with stripes. It is unusable and I have tried to reset it. I know I am not alone with this problem and don't really want to buy a new one yet. is there a way I can see if my warrenty is still applicable. it is an ipad1 and just under 2 years old.

    The warranty is one year unless you paid extra for AppleCare.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Second monitor displays weird colors

    Hi there,
    Yesterday I bought a Displayport to HDMI adapter (Mini DisplayPort Male - HDMI female) for my MacBook Pro 15" (Late 2011 version). I use this to connect my MacBook Pro to my Philips 32" television. Everything has been set up (I've adjusted the resolution of the TV to 1080p and put my refresh rate to 50 hz since my TV doesn't support 60 hz). But once in every 5 - 15 minutes or so, my screen turns green for a brief second and suddenly my background or whatever is on my second monitor turns in to weird colors. Sometimes it takes about 2 or 3 seconds and it switches back to how it normally was, but sometimes it takes way longer. I don't mirror my screen, I use it as a second display. But I can't figure out why the screen it switching betweens there colors and don't know how to fix it. I've looked it up on the internet, but couldn't find anything useful. So I hope you guys could help me with this.
    Thanks in advance.

    Bump.

  • Dual Monitor displays weird colors

    Hi there,
    Yesterday I bought a Displayport to HDMI adapter (Mini DisplayPort Male - HDMI female) for my MacBook Pro 15" (Late 2011 version). I use this to connect my MacBook Pro to my Philips 32" television. Everything has been set up (I've adjusted the resolution of the TV to 1080p and put my refresh rate to 50 hz since my TV doesn't support 60 hz). But once in every 5 - 15 minutes or so, my screen turns green for a brief second and suddenly my background or whatever is on my second monitor turns in to weird colors. Sometimes it takes about 2 or 3 seconds and it switches back to how it normally was, but sometimes it takes way longer. I don't mirror my screen, I use it as a second display. But I can't figure out why the screen it switching betweens there colors and don't know how to fix it. I've looked it up on the internet, but couldn't find anything useful. So I hope you guys could help me with this.
    Thanks in advance.

    Oops, I see that I'm in the wrong forum. Sorry about that.

  • Suddenly, Bridge displays photo colors wrong

    I've been using Photoshop Elements for several years--frequently--like almost daily. I'm currently using elements 6.0 with Bridge. I always view my photos in bridge before doing anything else.  All of a sudden, starting last week, when I open a folder in bridge, I can see in the thumbnails that the colors are OK, but very shortly thereafter, and/or when I click a thumbnail to preview an image, it drastically changes the colors in both the thumbnails and the preview. Like--a bright red rose becomes a dull muted red. A deep purple flower becomes bright blue. It's driving me nuts. I can't find anything in Bridge preferences. I am not a user who knows a thing about "color profiles" or anything else--I tweak photos individually using fairly simple features in Elements (use the Levels tool, adjust brightness and contrast, once in a while futz with hue or intensity for the photo, stuff like that).
    I haven't to my knowledge set anything globally. I haven't that I can recall installed any automatic update to the adobe products. I'm using the same camera, the same memory cards. I've never had this happen in hundreds upon hundreds of uses of bridge & photoshop, and many thousands of photos, and now it's doing it constantly.
    A week or two ago I was futzing with hue & saturation on some individual photos, but that batch of photos was all fine and I didn't notice that it affected anything other than the photo I was working on. Could I have set something somewhere accidentally and never known it?  I've searched the help for bridge & elements, searched the forums and found some similar questions but they don't seem to be the same situations.
    Help me, Mr/Ms Wizards!

    Elf1elf wrote:
    …All of a sudden, starting last week, when I open a folder in bridge, I can see in the thumbnails that the colors are OK, but very shortly thereafter, and/or when I click a thumbnail to preview an image, it drastically changes the colors in both the thumbnails and the preview.
    What you're seeing in Bridge is perfectly normal, expected behavior.
    Initially, Bridge displays a thumbnail straight from the in-camera converted and embedded JPEG preview embedded in the raw file.  Then, Bridge calls upon Adobe Camera Raw to build its own rendering from the raw data themselves.  Because the rendering criteria for ACR are not designed to emulate the in-camera raw-to-JPEG conversion, there will be a definite change in the images.
    I cannot speak to Elements because I don't use it, nor are most regular posters familiar with that very limited, emasculated application.  We use the full, professional-level version of Photoshop.  Elements is not the same as Photoshop.  The differences are great and varied.  Last year I did buy a license for Elements to use on a laptop, but successfully demanded my money back from Adobe.
    If you're seeing a marked difference in the display of the thumbnail and the final rendering of the same after a few seconds, check your preferences.  Make sure that the box labeled "Apply Auto Tone Adjustments" is NOT checked in the Camera Raw preferences.  This will minimize the differences.
    You may want to trash your Bridge preferences first by launching Bridge while you hold down the Option key.  Then make sure the "Apply auto tone adjustments box"  is NOT checked.
    Whenever an application begins to act weirdly "suddenly", that's a sign of corrupted preferences that need to be trashed.

  • Screen suddenly looks like a colorful barcode

    I was switching between apps and my screen suddenly went all-white with a lot of very thin vertical lines, so it looked like a big colorful barcode. I pressed command-option-eject to put the computer to sleep, and that worked. Then I woke it up and the screen looked fine.
    This is a brand new machine, so if there's a real problem lurking, someone please tell me so I can get it serviced before the warranty ends. Thanks.

    Hey.
    I've been having exactly the same problem since two weeks.
    Let me explain.
    While going to school, i had to finis a work in the bus, so i power on my laptop, and immediatly turn into a nice colorful barcode. I was very because i thought i had broken my laptop, while hanging it in my laptop case.
    So i close it immediatly, and re-opened it. The barcode disappeared.
    Okay, so at school no problem at all.
    I got back home, no problem at all either. But in the night, while watching a movie in my bed, my laptop, which were 1 meter far away from me, turned into the barcode, without touching it at all.
    GREAT!
    i closed it down, reopened it, but the barcode didn't get out as well the first time in the bus.
    i am getting very scared.
    after 15mins of trying to open it, close it, the barcode still belong on the screen.
    i fall asleep.
    And the problem is still there.
    I went to the Apple reseller, where i bought my Macbook Pro unibody 15" late 2008. And showed him.
    He told me that the screen is broken, or maybe the gaphic cards.
    But my laptop works perfectly when plug into my Apple Cinema Display. I am using dual link dvi, and works perfectly.
    But something strange, about my unibody, is that, the day i bought it (nearly 18months ago), i noticed that the headphone jack hole were very loose, so loose that if i just touch my headphone, it will unplugged and play sound on the built-in speakers.
    So I brought in the two weeks after my purchase, as this became very very annoying to use. We also noticed on this day, that the whole screen part were shifted something like one millimeter all along my laptop. Really strange.
    The guy tested the macbook. And at least, he told me something like "Well your macbook works perfectly, maybe they were a problem while mounting your laptop, but as it works perfectly (hardware and software), no need to send it to Apple
    Warranty Service".
    Great.
    But now, it's seems that there is to much problem and issues ont my laptop.
    I remember having many problems with it.
    -in the firth month of use, my macbook pro didn't go well into sleep mode (like many people in this forum), so sometimes i found my laptop on my desk, getting warmer and warmer, while being in sleep mode.
    -really nice video glitch while plugging my macbook on my apple cinéma display 30", video getting black/vertical
    -many firmware problem (like backlight keyboard in my Xp Boot Camp partition, with the superdrive)
    -the headphone jack issues, wich is REALLY annoying, i found a "cheap" solution, i bought a behringer audio card (19euros)
    -and now the screen issue, which cannot let me use my laptop as a portable computer. Do I have to bring my own screen everywhere i go?
    I can't imagine i bought this computer 2200 euros.

  • Video displays weird colors with normal sound

    I recently downloaded the newest version of quicktime (itunes said it was required) and also service pack 2 because that was required for the newest quicktime, but now when I play videos, they are playing (I can hear the sound), but the video is just a weird display of colors and shapes.

    Open the QuickTime Control Panel / Advanced tab and check the box for "Safe mode".
    Quit and relaunch QuickTime Player and try the files again.

  • Camera has suddenly started displaying white screen after I take a picture.

    Greetings all!
    My camera has worked great up until this week.
    I can see the image through the camera but after I take the picture my screen goes solid white.
    I no longer see the options to Send, etc on the screen.
    When I view pictures, when I open it I only see a red X in the upper left corner of the screen in a square.

    Hi and Welcome to the Forums!
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Computer screen suddenly started going crazy

    While reading an email, the images on my computer screen started to scramble and shake. I immediately tried to exit from the email and I tried to log off the computer to make it stop but the computer for several minutes would not allow me to do so. Eventually I was able to turn off the computer but later after I got back on, it did the same thing for a few minutes after i had been on a while. Does anyone know why this happened or how I can prevent it from happening again?

    Hey there ccullison,
    It sounds like your built in display on your MacBook Air is behaving erratically all of a sudden. I would use the troubleshooting in the following article to help you resolve issues with the video on the screen, named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Why does my iPad screen suddenly go black?

    While using my iPad (original, wifi only) the screen will suddenly go black and my only recourse is to push the home button and start back there.  If I am in the midst of writing an email it is lost.
    Is there a cure for this malady?
    This occurs mostly in either email or the browser bcause these are the apps that I use 95% of the time.

    Might try posting in the MacBook Pro laptop forum. This is the Mac Pro desktop forum.
    Also see:
    OS X: When your Mac doesn't sleep or wake

Maybe you are looking for

  • Create a link to a specific spot in PDF document

    Is it possible to create a link from a Table of Contents item to a specific heading on a page within the same document. So far from what I've read and what I've tried I can only link to a specific page but not a specific section on that page. Is that

  • Problem copying to student machines using ARD

    I manage a school lab and have been using Remote Desktop, all of a sudden the copy command to student computers stopped working. I found how to do a clean install and updated ARD but it still isn't working. I can access the machines, control them,eve

  • Error: -69774: Couldn't bring the new Core Storage Logical Volume online

    Hi, I have a filevault encrypted drive (750GB). I first noticed a problem when it prompted my for the FileVault passphrase (which I had stored in my keychain) and entering the correct passphrase resulted in the typical "error" response (the sideways

  • How to set up a Favourites in iPhoto

    iPhoto.  How do you set up this on MacBook Air so you can use the Heart symbol to create pictures you like under one 'Favourite' album as described in the new release top 11 tips?

  • Configuring .jca file for

    Hi, we have a deployed BRM JCA Resource and now we're trying to Invoke an operation from it. How do we configure the .jca file to use in the third party adapter for it?