My Ipad showes a contact and a blue sign Itunes and nothing else works

After updating my Ipad I can´t get it working! The screen o nly show`s a white contact and a blue symbol of Itunes.I´ve tried to contact my other computer but I`ve got a messege that tellm me thatmy Ipad is under rehab....

Hi there Monkan!
I have an article that can help you address this issue with your iPad:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Similar Messages

  • Update the iPad 2 with new iOS uppgrade, but after the screen only show the apple and nothing else. has been the case since yesterday. have turned off the iPad and turned it on again many times, but still only apple shown. What should I do?

    UPdate the iPad wjith new iOS upgrade that where shown under settings on the iPad, but after I did the upgrade the screen has only shown the apple and I can't get back. This has been the case since yesterday. Have turned off t.he iPad many times, but every timebwkhen Ibturn it on again the screen onöy show the apple icon and nothing else happends. What should I do? Anyone having the same problem and how can this be solved?

    Did you try to connect in recovery mode, explained in this article?
    iOS: Unable to update or restore

  • IPod shows apple logo and nothing else

    I managed to put it on disk mode, and iTunes actually "saw" it. I even uploaded some tracks, everything is ok supposedly but when I reset it, it shows the apple logo and won't do anything else after that. All you see is the logo.
    That was the case even before I upload any of the tracks.
    thanks in advance guys
    PowerMac G4 Mac OS X (10.3.8)

    You need to put it back into disk mode, connect it to the computer, and restore it with the ipod updater. The ipods software is not installed correctly. Here is a link addressing your exact issue. The artical also contains links about restoring an ipod http://docs.info.apple.com/article.html?artnum=61584

  • Monitor will only show sleep mode and nothing else

    monitor showing only sleep mode and I have turned off and I have tryed to restart but no scrren  but sleep mode.

    Could be different things: Cable, video-socket in computer, or the monitor itself.
    do you have the option of trying another cable or another monitor?
    Perhaps go to a friend and see if they can help you.
    In order to determine what's the issue, you'll need to do these tests.
    Please let me know the result of these tests so I can determine the exact error.
    AlHaste - HP Notebook Technician
    Were I able to help you? Please say thanks by clicking on the purple thumbs up icon over to the left
    Did I solve your issue? If so, Please mark Accept As Solution to the right

  • Manager, F11 and nothing else works to recovery

    Hello,
    my comuter stopped working after upgrade to Windows 8.1 from 8. So i wanted to use recovery manager and it didn´t work so i tried to reinstall OS but in the end i had to install win 7 because nothing work correctly. Now i gave up to find a way to boot my recovery partition which is still there.  I tried to completely copy all files and that failed at permissions. And when i want to boot from this partition it isn´t visible in boot device options but in cmd prompt i looked in this partition and there is bootmgr efi files for booting just everything i need to repair my notebook. So my question is how to boot from this partition?
    I tried to download recovery manager but it writes that it isn´t installed correctly and I can´t find it anywhere.

    Hi @mijaneck 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp you are having a difficulty access the recovery manager and eventually reinstalled Windows 7.  When trying to access the recovery partitions did you get any errors?
    Did you create recovery CD/DVDs  ?
    Here is a link to  Performing a HP system recovery Windows 7. 
    Please note the section on "Steps to follow for Recovery from the startup screen (during system boot) OR when unable to boot to login in screen"
    If you are still unable to access the Recovery and did not create recovery disk, I suggest contacting HP support and inquiring about a recovery kit for your notebook.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • When iMac wakes my wifi won't connect, and nothing else works.

    Since updating to Mtn Lion on my iMac, when my computer has been hibernating for a while (a few hours+) when I wake it, it attempts to connect to wifi, and never actually does.  While this occurs, I can't open any program, application, even Activity Monitor to "force" the task to end or anything.  My only solution has been to manually shut off and re-boot the machine.
    Anyone else having these issues?  Once I reboot, everything is fine - it automatically logs into the wifi and programs start instantly.  It's as if there's a hang up that's preventing anything else from happening.
    No issues with my macbook pro

    Use the ( - ) button to delete the wireless network settings you currently have configured, and restart the computer. Go ahead and reconnect to your network, and hibernate. See when it comes out of it, if it's resolved. Or wait awhile
    -Dac

  • He! lloMy Iphone stopped at a screen and nothing else works. It's locked.

    Please, what can I do to restart it?

    http://support.apple.com/kb/TS3281
    There should be something in this document to get you sorted
    First  try a reset ,hold home/sleep buttons until  the Apple Logo ,ignore the off slider

  • Include showing and nothing else

    Hello,
    I am generating a web page using include(). In live view and
    design view it just shows the header and nothing else. The rest of
    the page is omited. If I upload to the server it displays in the
    browser perfectly. any ideas why this would be happening?

    You have improperly placed <html>, <head>, and
    <body> tags within the
    include file.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "MICHMAN" <[email protected]> wrote in
    message
    news:fis0ui$hj2$[email protected]..
    > Hello,
    > I am generating a web page using include(). In live view
    and design view
    > it
    > just shows the header and nothing else. The rest of the
    page is omited. If
    > I
    > upload to the server it displays in the browser
    perfectly. any ideas why
    > this
    > would be happening?
    >

  • Macbook White Screen (and nothing else happens after that)

    Hi All,
    I have a problem with my wife's macbook (which is exactly 13 months old, Aargh!)
    She was having some problem with slow apps etc, so decided to restart, the restart didnt go through so she tried holding down the power button to force shut down.
    When she tried to restart it several seconds later, it chimes but it gets stuck on a white/grey screen with nothing on it, not even the Apple logo. Something started whirring louder and louder for the first 2 minutes and it stayed that way for at least 10 minutes++. Note that it shuts off immediately as soon as I push the power button down.
    I have tried all the startup key combinations listed on http://support.apple.com/kb/HT1533?viewlocale=en_US
    But other than the Firewire logo showing up when I pressed T down at startup nothing else works, the actual Firewire target disk function didnt work when hooked up to another mac.
    I have also tried taking off the battery/AC adapter and holding down the power button method to no avail.
    The Macbook itself was bought in the US, but we are now in Europe so the startup CDs are not around, or at least not yet . I doubt it will do miracles anyway...
    I know I'd probably have to take it in to an Apple Store to see whats up, but I thought I'd share it here first.
    Let me know if anyone have similar experiences..
    Cheers.

    Try resetting the PRAM by restarting your computer while simultaneously holding down the Command-Option-P-R keys until the computer restarts a second time.
    Hope this helps

  • I updated my ios and now only apple logo appears nothing else works

    Recently I got a notification about software update and i used itunes to update my ios 5.0.1 to ios 6 but now only apple logo appaers and nothing else works please help!!!!

    Try resetting first.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    If that doesn't help, try restoring your iPhone to factory settings >  http://www.everythingicafe.com/how-to-restore-iphone-to-factory-settings-without -itunes/2011/12/13/
    Be aware, resetting to factory settings deletes all user data.
    Then try updating to iOS 6 again.

  • If i reset my ipad will my contacts and other datas in my iphone be deleted also? I am using i cloud on both ipad and iphone

    IF i reset my ipad will my contacts and other datas on my ihone be deleted also?. both are on icloud

    if you "reset all content and settings" your phone will go back to its out of box factory settings

  • My ipad keeps showing the apple logo and nothing else and it wont restore it keeps coming up with error 19

    I have an iPad 2nd generation and all it does is show the apple logo continuously and  nothing else. I cannot get into the iPad and I have tried to restore it numerous times but it comes up with error 19 or error 14. Or it restores but after it has it just comes back up with the apple logo once again and nothing changes or it flashes a few times. does anyone know how to fix this?
    Cheers Meg

    You need to put your iPad into Recovery Mode. Follow the instructions in this Apple support document very carefully. It might take several attempts to get it to work.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • I'm experiencing major synchronisation issues on ICloud, especially for documents created on my Mac in pages, keynote and numbers. Contacts and agenda items work fine. I checked all my account settings.

    I'm experiencing major synchronisation issues on ICloud, especially for documents created on my Mac in pages, keynote and numbers. Contacts and agenda items work fine. I checked all my account settings. But while I can upload documents from my MAC onto ICloud, they don't show on my IOS devices (whereas previously this worked without issues).

    On this Mac I did move all the visible iCloud documents out of iCloud, into another folder, then disabled syncing, exactly as you suggested.  But there were, apparently, documents remaining in my Mac's local iCloud store, "~/Library/Mobile Documents/" that I could not see (so could not remove). The Pages file "CSU-PD-UN1.pages" was one such document.
    The act of disabling iCloud's document sync'ing, in System Prefs, just renames the local "iCloud" store to "~/Library/Mobile Documents/<appleid#>/" effectively shielding the it from the sync'ing mechanism.  Looking at this renamed folder (the screenshot above) revealed that "CSU-PD-UN1.pages" (and other files) had not been removed; it would be reasonable to assume that one, or more, of these "undeletable" files were related to my original problem, and when I re-enabled doc sync'ing, those bad files would just clog up the works again.
    So I deleted them with the Finder on both Macs (the other Mac had bad files too, but different ones), then re-enabling sync'ing on the two Macs and doc sync'ing between the Macs (and iCloud.com) appears to now work as intended.
    Sadly, iOS devices (iPhone and two iPad) now do not sync at all.  Newly created documents do not migrate to any other devices, and documents on other devices do to migrate to the iOS devices.
    Your suggestions have certainly done some good, but something is now keeping my iOS devices out of the the iCloud doc sync'ing process.  I suspect it's a similar problem as the Macs had ("invisible" files gumming up the works), so I'm going to apply some nasty tricks to explore the iOS devices file system and see if I can find them, and delete them by brue force.

  • My autofill stopped working recently.  I looked under preferences and all the necessary boxes are checked.  When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.

    my autofill stopped working recently.  I looked under preferences and all the necessary boxes are checked.  When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.

    Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
    1. Press the down-arrow key. (Credit to ASC member iNeight.)
    2. Quit and relaunch Safari. Force quit if necessary.
    3. Click in the first field to be filled, and then select
    Edit ▹ AutoFill Form
    from the menu bar. You may have to reload the page in order to do this.
    4.  Select
    Contacts ▹ Preferences ▹ vCard
    and uncheck the box marked
    Enable private me card
    if it's checked.
    5. Select your card in Contacts. Then select
    Card ▹ Make This My Card
    from the menu bar.
    6. In Safari, select
    Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
    If the box was already checked, uncheck it and then check it again.
    7. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.
    8. Run Software Update and install any available updates.

  • My iphone is able to charge when i connect it to my computor, but no matter what i do, will not show up on itunes. i have tried resetting both the computer and the iphone and nothing is working.

    my iphone is able to charge when i connect it to my computor, but no matter what i do, will not show up on itunes. i have tried resetting both the computer and the iphone and nothing is working.

    Type "ipad not recognized in itunes" or similar into the search bar at the top of this page by "Support".

Maybe you are looking for

  • CR2 files open from one camera, but not the other in CS2

    Running Mac with CS2. My camera raw files shot with my lovely Canon 5D open and can be viewed in bridge and in photoshop, but NOT the camera raw from my brand new Canon powershot G9. They are both producing CR2 files. I can see the images in the brid

  • Describe statement in abap

    how to use this descibe statement.can any one please explain me with example

  • How to run batch select query ?

    I have multiple "select" query . how do i run the query in a efficient way and absorp the values into an ArrayList ? addbatch() method is mainly used for "insert" kind of query . and also , it would be bad idea to run "select:" query one by one . can

  • Ipod music to imac20

    ipod (formatted with windows PC) music needs to be transferred to itunes on my new iMac.iMAC recognises my ipod but got no idea how to transfer across, the ipod library shows all of the tunes but grey background. How do I pick up and transfer across

  • How to forward to another page from beginDisplay

    I have to forward to Page 2 in beginDisplay method of Page1 based on some parameters. I am having trouble aborting the current page (Page1) load. I tried the following: if (from.equals("xyz")) ViewBean targetView = getViewBean(pgPage2ViewBean.class);