My ipad shows connected via bluetooth but doesnt actually go online
I have recently been using my MacBook Pro internet to connect via bluetooth to my ipad. It was working fine and then I went away for a week and when I came back its now not working. It shows connected on my MacBook and my Ipad but when I try to go on the internet in my ipad it says I cannot connect. Any ideas as to why it was working before and now its not. I have tried uninstalling my ipad from the bluetooth and resetting it up but still nothing.
Post in the iPad forum.
Similar Messages
-
Why can't I get my iPad to connect via bluetooth to my iPhone 5s?
I never have been able to get my iPhone 4s or the new iPhone 5s to connect with my iPad via Bluetooth. Both are running the latest 7.0.3 software.
What are you trying to accomplish by this type of connection? iOS devices use Bluetooth to connect to dado phones, speakers, some keyboards and a few other devices. Bluetooth on iOS devices is not set up to connect two iOS devices.
-
HT1212 my ipad says connect to itunes but doesnt allow the passcode to be entered
I apparently disabled my iPad when I didn't turn the keyboard off. It says I need to connect to itunes but when I do it says my ipad is locked...seems like a viscious circle.
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via Bluetooth whenever I try even though both shows that the devices are discoverable. I also tried connecting them with my Bluetooth enabled laptop but it also didn't worked. Because of the Bluetooth not working I also can't enable airdrop.
What model iPad?
What model computer and OS version>
AirDrop requires:
What you need
To share content with AirDrop, both people need one of these devices using iOS 7 or later, or a Mac with OS X Yosemite:
iPhone 5 or later
iPad (4th generation or later)
iPad mini
iPod touch (5th generation)
You also need to turn on Wi-Fi and Bluetooth. If you want to share with your contacts, sign in to your iCloud account.
Learn more about using AirDrop to share with people using a Mac with Yosemite.
Use AirDrop to wirelessly share content - Apple Support
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
*The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
Otherwise you need an app to pair via BT one iOS device to another iOS device. There may be apps that allow pairing with a Mac computer. The iOS devioces do not have the BT profiles necessary natively to pair with a computer or another iOS device except for AirDrop -
my keyboard and mouse are connected via bluetooth to my iMac, both work. but under network preferences bluetooth PAN is showing with a yellow dot and no ip address. is this normal?
Yes.
Bluetooth PAN refers to a BT personal area network
http://en.wikipedia.org/wiki/Personal_area_network
Barry -
Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi doesn't
troubleshooting hotspot http://support.apple.com/kb/TS2756
-
I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissamelissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that. -
I'm trying to download photos off my old LG phone into iPhoto but it won't connect via Bluetooth
I'm trying to download photos off my old LG EV3 via Bluetooth into iPhoto. It shows that the device is paired to my MacBook, however, when I try to connect the phone it shows that it's connected for only a few seconds but then quickly disconnects and the phone says "No Services Found." I also tried to change the connection for this phone (it's currently set-up as a Dial-Up modem connection via Verizon but the phone is no longer connected to Verizon) but it apparently will not let me do that. Any ideas?
COntact LG support for support on their phone - this does not involve iPhoto for the Mac in any way
LN -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos
Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.
-
I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.
Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do -
MBA won't connect to iPhone or Jambox via Bluetooth, but works with bluetooth Apple Mouse
MBA won't connect to iPhone or Jambox via Bluetooth, but works fine with bluetooth Apple Mouse. When trying to pair with the iPhone it says "The Bluetooth Network is unavailable. There was an error connecting to your device. Make sure the device is turned on and in range." When trying to connect to the Jambox it says "Bluetooth audio failed. There was an error connecting to your headset. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted." The iPhone and Jambox pair together fine, and I have paired with both the iPhone and the Jambox easily in the past. I haven't updated anything - it just stopped working with these two devices. This is very frustrating.
I could not pair with Uconnect on a 2011 Jeep after upgrading to iOS 8.2 on an iPhone 6. After shutting off iCloud and resetting network settings I was able to successfully pair the phone to Uconnect
-
My iphone 5 s is connected via bluetooth system with my car mercedes benz e class. I can make calls & receive calls but my phone music can't be play via car music system. The car muisc system can't find external devise if it is connected with i phone 5 s via bluetooth or via cable.
Hello parthivfromahmedabad,
Thanks for using Apple Support Communities.
To troubleshoot issues with car stereo bluetooth connections please follow the steps in the article below.
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Take care,
Alex H. -
My MacBook Air and my iPhone are coupled but they cannot connect via bluetooth. How can I solde this ?
For what purpose are you trying to connect them?
The only supported Bluetooth function between a Mac and iPhone is internet tethering. -
Smartphone paired but not connected via bluetooth
My HTC Desire HD is paired via bluetooth but not connected, how do I get it to connect?
Hello:
I know nothing about your particular phone, but this article may help:
http://docs.info.apple.com/article.html?path=Bluetooth/1.0/en/blu23.html
Barry
Maybe you are looking for
-
How can I run a windows Cd on my mac?
How can I run a Windows Cd on my Mac?
-
Hello Guys , I´m trying to create a stock transfer using a "stock transfer order" using t-code me27 and the material is a stock material and has CS "Case" marked as Unit of measure for the order unit but when I try to save my purchase order it cha
-
Creation of table in interactive form
hai, any one can explain me the creation of table in interactive forms transcation code(sfp) or any can send any material because i am new to this, how to build interactive forms advance thanks. regards, shravanramidi .
-
Problem in creating database instance in linux through webtool
Dear sir i got sql erroe ,when i mam trying to creat database instance.i am decrbing steps here from point of start. Initially i invke two command 1:/opt/sdb/programs/bin/x_server 2:/etc/rc.d/init.d/maxdbweb start then i invoke web application as:htt
-
Can't Change Frame Rate in Properties
To change project properties in FCPX you click the wrench icon, which brings up a window to select 720p, 1080p, etc as well as frame rate. The problem is, there are no options in the dropdown for the frame rate in all of my projects, it chooses one a