My ipad shows the message, ipad stop function, please connect to itunes, what shall i do?, my ipad shows the message, ipad stop function, please connect to itunes, what shall i do?
i forget my lock screen password, after numerous attempt, my ipad shows the message, ipad stop function, please connect to itunes, what shall i do?
Force iPad into Recovery Mode.
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times
Similar Messages
-
When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.4.0.80
Application Timestamp: 4e262cfr
Fault Module Name: QuickTime.qts
Fault Module Version: 7.70.80.34
Exception Code: c0000005
Exception Offset: 00146b30
OS Version 1033
Locale ID:
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information4: 0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142
-
My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I've recently upgraded my iPad to OS 5 and I am running iTunes 10 on my MacBook Pro. For some unexplainable reason, I'm now getting a message that items (mainly TV shows I've purchased through iTunes) are not able to be downloaded because the computer is "not authorized." But the computer IS authorized. I follow the instructions to "authorize" it and, of course, I'm then told that the computer is already authorized! Still, the downloads won't sync.
Can anyone help me out with this?I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue. -
My Ipad shows following iCloud backup msg : " This iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi. " There is an OK button beneath the message but nothing happens when I press it. I have plugged in, locked it and its always in Wi-Fi region. Help !!!
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use your device again -
After updating my ipad 4 to ios 7, I cannot charge my ipad with the charger supplied with it,showing messages of errors. what can I do to resolve it? my ipad now has only 2% of charge.Tried with lots of chargers with the same tresult.Somebody told me that it's due to the software upgradation, I have to wait for the next upgrade. need help. my ipad is dying!!!
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipadhttp://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6uhttp://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274http://support.apple.com/kb/TS3274
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
Cheers, Tom -
My iPad suddenly stopped working with my home network. It shows the network to choose from but will not connect. When I look at details in that network it does not show IP address or any other info for the network. Setting is on DHCP and http proxy is set on auto. Network is active and can connect on wife's iPad and other home computers. Do I have another setting wrong?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have a iPad Keyboard Dock for the iPad 1. I purchase an iPad 2 and the dock worked fine for a week no fit problem none worked. I received a tiny message about iPad Keyboard Dock it stop working immediately after dismissing message.
Hi and welcome..
Connect your iPad to your computer. Launch iTunes. Make sure your iPad is recognized in iTunes under Devices on the left.
Select the Summary tab then click Update.
Just to make sure your iPad software is up to date.
Carolyn -
So I was updating iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions
Are you following these instructions?
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?
The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
Another way to transfer. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom
Look at this link for convertion the .mod format.
http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
Message was edited by: Texas Mac Man -
I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting" as well as "unable to verify". How can this be sorted? Thanks
Hi,
Thanks.
I have tried signing out and in, still does not work.
Still just get the previously mentioned "messages".
I wanted to restore, but then you have to turn off "find my ipad/iphone" but this is not allowed, as I cannot connect to the itunes/icloud or app store. The units work with current apps. EG; email etc, and with apps that do not require current updates.
Thanks -
Can anyone please tell me how to stop email previews from appearing on my screen. I have turned off the preview option in settings on both my ipad and iphone, but they still keep appearing. Thanks
works ok on mine - (5, 7.1.1). Try again. with previews set to none, mine shows the sender and the subject line only. (you cannot get rid of the subject) with the other settings, you get the sender, subject line and however many lines you selected.
-
I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!
Would throwing it in Recovery mode and restoring as new clear it up?
(same for Ipad)
Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
Under Creative Commons License: Attribution No Derivatives
THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it. -
When i try to sync my ipad with the itunes on my computer it gives me an error message. " The sync session failed to start. How can i fix this?? I had to uninstall itunes on my computer because of runtime error R6034.
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
IPod Composite AV Cables no longer recognized by iPod
I posted this in the iPod Touch section but it seems to have been deleted. Anyway, as the title states, my iPod Touch no longer realizes that it's plugged into the proprietary, authentic-chip-containing composite AV cables. I can't figure out why thi
-
Printer does not print. Even the test page did not print. I put in a new cartridge.
Printer doesn't print.
-
Quality score by usage decision?
Dear SAPIENTS, Can any one help me in creation of this configuration setting? I would like to have quality score calculation from usage decision. Score calculation should be done by number of quantity received against order. Suppose if 100 quantity o
-
Pick Rendition button disabled when inserting image into Blog Post Body
I have configured Image Renditions by enable BLOB caching on the web application and enable publishing features on a Blog site. When I insert an image to the Body field when editing a Post (EditPost.aspx), the Pick Rendition button is disabled. It wo
-
Fxtrans Package gets cancelled
All, When I execute my FxTrans package, it gets cancelled and when I look at the process chain, its red on the clear temp tables It used to work flawlessly till yesterday. I am on 7.5NW. Can anyone give me any insights on how to go about resolving th