My ipad shut-off and now all i get is the apple logo and a spinning circle. Any suggestions on why and what I can do about it?

my ipad 2 shut off and now all I get is the apple logo and a spinning circle

Try holding down the home button and the sleep / wake button at the same time to restart the iPad .

Similar Messages

While updating my ipod it crashed and now all I get is the apple logo on the screen.

I clicked on the update operating system that had a notification next to it. It downloaded for a long while then asked me to hook up to itunes. I didi and it said it was downloading again . Then updating. Then said update failed and now all that shows on the screen is the apple logo. Also
the ipod won't shut off. Please help.

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Also:
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

HT4623 I deleted all contents from my iphone 3gs so that i could give it to my nephew....now all i get is the apple logo and nothing will come on. have i deleted the programme completely if so how can i get it back???

I think theoperating system from my iphone 3GS has gone

Restore the device with iTunes > http://support.apple.com/kb/HT1414
You may need to put it into Recovery Mode first > http://support.apple.com/kb/HT1808

My Mac book won't turn on. All I get is the apple logo and a loading icon and bar, then it just shuts down. What do I do?

My Mac book won't turn on. All I get is the apple logo and a loading icon and bar, then it just shuts down. What do I do?

What OS are your running?
Mavericks 10.9.4 boot into recovery and run the DiskUtility >Repair Disk
Recovery http://support.apple.com/kb/HT4718

I recently restarted my iphone and now all that appears is the apple logo how do i fix this problem

i recently restarted my iphone and now all that appears is the apple logo how do i fix this problem?????

Plug it into your computer and restore it.

I switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HT2188 My software failed a n now all I get is the apple icon! Can anyone help please

My software failed a n now all I get is the apple icon! Can anyone help please

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My ipod touch is not connecting to itunes and wont turn on all i get is the apple logo when i turn it on. how do i fix this?

My ipod touch is not connecting to itunes and wont turn on all i get is the apple logo when i turn it on.
How do I fix this?
can anyone help?

Start her:
iOS: Not responding or does not turn on

My Iphone5 screen is black and when I plug it in, all I get is the Apple logo... flashing

My Iphone 5 has a black screen and when I plug it in, all I get is the Apple Logo, which flashes. Help!

i have the same problem but i have the iphone 4

IPad disconnected during update. Now all I have is the Apple logo

My iPad was disconnected during todays iOS update. Now it's frozen on the Apple logo screen. Any help out there?

Hi, PikFlyer.
Thank you for visiting Apple Support Communities.
I understand that your iPad is unresponsive at the Apple logo when attempting to update. I would recommend going through the troubleshooting steps below.
If you see a black screen
You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on.
You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
Cheers,
Jason H.

Tried Resetting, Now all I see is the APPLE logo and loading

Ok so here it is....I bought a used original iphone of a friend of mine. On my way home, I decided to reset the iphone to its original settings....now its been like 6 hours....and all I see is the apple logo, then it tries to load and it stays that way....then it blinks and the apple logo comes on again. Is there anything I can do??

You should put the phone into DFU mode and restore it in iTunes.
To put your phone in DFU mode:
1. connect the phone to a computer with iTunes
2. Hold the home button and sleep/wake button simultaneously for 8 seconds.
3. Let go of the sleep/wake button and continue holding the home button
4. If successful a dialog box will appear in iTunes that states that an iPod was detected in recovery mode. The phone's display will remain black.
5. Click ok in the dialog box, then click restore
After that the phone should be functional.
I hope this helps.

I reset my 3Gs, but now all I get is the Apple icon. It won't turn off or anything. Is it bricked? What is bricked? How do I fix it please. Can anyone help me please.

Hi, I've just appear to have deleted my iphone and now all I'm getting is the Apple icon.
It won't turn off or anything. I have tried holding in the off button and home button together,
but the icon goes and comes back again. It won't connect to Itunes, as the device is not showing
up. Can anyone HELP PLEASE. I think I need to reload Iphone back onto the device.

Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414

How do I set my I pad back to factory settings? I tried one method and after, now all I get is the itunes logo. help please.

How do I set my ipad back to factory settings? I did what ipad said to do but now all I get when turned on is the itunes icon. I can't do anything on my ipad. Help?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps..

HT4623 i failed to update properly update my itouch, now all i see is the apple logo. how to fix it?

the update to iOS 6.1.5 has been on my itouch for a couple of months so i decided to just go with it without any knowledge on how to properly do it. All i did was delete my apps and thats only because theres nothing special with them. Then i pressed dowload and when i ot past that i installed. i thought i was doing the right thing but now all i see is the blinking apple logo. what shoud i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Just upgraded 3GS to iOS 6 now all I get is the apple icon

I just upgraded my 3GS to iOS 6 and now it keeps turning on and off only getting to the apple icon. I tried plugging into iTunes but it won't recognize my phone

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

My ipad shut-off and now all i get is the apple logo and a spinning circle. Any suggestions on why and what I can do about it?

Similar Messages

Maybe you are looking for