My ipad sound doesn't work?
My ipad sound does not work, only when I put head phones in or using FaceTime.. Event if I use my head phone the sound is in and out. It's not locked on silent or anything. It's just not working, not my apps, music or videos. My ipad will just be completely silent. Then a weeks later the sound will decide to work then stop working later on or when I charge it
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Swipe upwards from bottom of screen to launch Control Center. Make sure sound is not muted (tap the little bell)
Similar Messages
-
I need help the only way I can listen to my ipad is with my headphones.
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
If that doesn't work, check your headphone jack carefully for debris and clean it out. -
After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks
There are numerous reports of this issue happening on iPhones. It may be a glitch that will need a new update. Some find that a full shut-down and restart fixes that problem, but not always.
-
My sound doesn't work for anything but the alarms work.. Any ideas
Did you check the switch on the side, next to the volume controls? Is it set to turn off the sound in Settings/General/Side switch?
Can you hear sound if you change the settings for your ringtone for example? -
Since downloading Mountain Lion, when I open youtube in Safari, then sound doesn't work. Also I started receiving dupolicete email
Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My iPad speakers doesn't work with some apps, but works ok with my iPod app. The sounds from this apps works ok with earplugs. How can I fix it?
Talking to yourself again ...eh?
-
Hi, I rented warhorse HD, and the sound doesn't work, my itunes version is 10.6.1(7). How do I fix it or who do I direct to get my money back? Thank you
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?
I used disk permission repair to try to resolve this as well as a 'soft' restart. Still have a grayed-out mute checkbox in the sound section of system preferences.
-
sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't knowWhat does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]] -
i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything
Will u help me or not?
-
Mplyer sound doesn't work, instead amarok's sond work !!!
hi everyone, the problem is that mplayer's sound doesn't work.
the sound with Amarok and Firefox(e.g youtube) works, but with mpalyer no !!!
i've posted some commands:
thanks
/etc/mplayer/
codecs.conf example.conf input.conf
/etc/mplayer/example.conf
# MPlayer configuration file
# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
# and per-user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
# The configuration file settings are the same as the command line
# options without the preceding '-'.
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
# Profiles should be placed at the bottom of the configuration file to ensure
# that settings wanted as defaults are not restricted to specific profiles.
# video settings #
# Specify default video driver (see -vo help for a list).
#vo=xv
# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib
# FBdev driver:
# mode to use (read from fb.modes)
#fbmode = 640x480-120
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes
# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
# vertical frequency range
#monitor-vfreq = 50-90
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M
# Start in fullscreen mode by default.
#fs=yes
# Change to a different videomode when going fullscreen.
#vm=yes
# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0
# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes
# standard monitor size, with square pixels
#monitoraspect=4:3
# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9
# Keep the player window on top of all other windows.
#ontop=yes
# audio settings #
# Specify default audio driver (see -ao help for a list).
#ao=oss
# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd
# Specify the mixer device.
#mixer = /dev/mixer
# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100
# Output audio to S/PDIF
#ao=alsa:device=spdif
#ac=hwac3,hwdts,hwmpa,
# other settings #
# Pretend to be Window Media Player.
# Fixes playback when playlist and media file use the same URL.
#user-agent=NSPlayer/4.1.0.3856
# Pretend to be Quicktime
# Fixes playback for apple.com/trailers redirects
#user-agent="QuickTime"
# Pretend to be Realplayer SP
# Fixes playback for some video streaming sites
#user-agent=RMA/1.0
# Pretend to have lots of bandwidth
# Speeds up realmedia rtsp:// streams
#bandwidth=2000000
# Pretend to be Winamp
# Fixes playback of some NSV streams
#user-agent="Winamp NSV Player/5.12 (ultravox/2.0)"
# Drop frames to preserve audio/video sync.
#framedrop = yes
# Specify your preferred skin here (skins are searched for in
# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss
# Resample the font alphamap.
# 0 plain white fonts
# 0.75 very narrow black outline (default)
# 1 narrow black outline
# 10 bold black outline
#ffactor = 0.75
# cache settings
# Use 8MB input cache by default.
#cache = 8192
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50
# DVD: Display English subtitles if available.
#slang = en
# DVD: Play English audio tracks if available.
#alang = en
# Profiles #
# The options declared as part of profiles override global default settings,
# but only take effect when the profile is active.
[protocol.dvdnav]
#vc=ffmpeg12,
#mouse-movements=yes
#nocache=yes
#[vo.vdpau]
#vc=ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffh264vdpau,ffodivxvdpau,
# Most video filters do not work with vdpau.
#vf-clr=yes
# OSD progress bar vertical alignment
#progbar-align=50
# You can also include other configuration files.
#include = /path/to/the/file/you/want/to/include
~/.mplayer/config
# Write your default config options here!
# [default] viene applicata a ogni file
[default]
# usa il server grafico X come video output
vo=xv
# usa alsa per l'audio output
ao=alsa
# ao=oss # Use OSS4
# decodifica multithreaded H264/MPEG-1/2 (valido: 1-8)
lavdopts=threads=2
# impostare il canale audio preferito (in questo esempio il numero sei)
channels = 6
# scala i sottotitoli al 3% della dimensione dello schermo
subfont-text-scale = 3
# non usa fontconfig
nofontconfig = 1
# aggiunge bordi neri ai filmati che non hanno lo stesso aspetto di forma dello schermo
# per wide screen monitors
vf-add=expand=::::1:16/9:16
# per non wide screen traditional monitors
#vf-add=expand=::::1:4/3:16
#profilo di up-mixing da due canali audio a sei canali
# use -profile 2chto6ch to activate
[2chto6ch]
af-add=pan=6:1:0:.4:0:.6:2:0:1:0:.4:.6:2
#profilo di down-mixing da sei canali audio a due canali
# use -profile 6chto2ch to activate
[6chto2ch]
af-add=pan=2:0.7:0:0:0.7:0.5:0:0:0.5:0.6:0.6:0:0
# Disabilita screensaver
heartbeat-cmd="xscreensaver-command -deactivate &" # stop xscreensaver
stop-xscreensaver="yes" # stop gnome-screensaver
ls /etc/modprobe.d/
alsa-base.conf snd-hda-intel.conf
etc/modprobe.d/alsa-base.conf
options snd slots=snd_mia,snd_hda_intel
options snd_mia index=1
options snd_hda_intel index=0
/etc/modprobe.d/snd-hda-intel.conf
options snd-hda-intel model=auto
cat /proc/asound/modules
0 snd_hda_intel
lsmod |grep snd
snd_hda_codec_hdmi 30162 1
snd_hda_codec_conexant 36759 1
snd_hda_intel 37000 2
snd_hda_codec 150305 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7210 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59109 11 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 sndNeburski wrote:
ryanjacobs wrote:So, apparently, your system cannot find the ALSA output driver. I suggest that you use a different driver than ALSA.
OP should first go through the wiki page of ALSA to ensure that his ALSA setup is working correctly. There aren't many sound setups that do not work under ALSA. If OP is relying on another sound setup then he should follow the appropriate wiki and tell us so.
@otto88: It would also help if you would try to explain what your intentions were. I'm assuming you merely want to have sound working and not configure some fancy setup. In that case you should just stick to a basic setup and follow the wiki step by step (don't skip any line and if you don't understand something, you figure that out or you ask people, don't just ignore it).
For instance I don't even have those /etc/modprobe.d/alsa-base.conf and /etc/modprobe.d/snd-hda-intel.conf even though I have 2 sound devices, while you seem to only have 1 sound device
otto88 wrote:cat /proc/asound/modules
0 snd_hda_intel
So your /etc/modprobe.d/alsa-base.conf in that case is totally unnecessary, let alone that you don't even have the snd_mia module loaded so why do you even configure alsa to load it at index 1. You aren't supposed to simply copy and paste the configurations from the wiki. Those configurations are merely there to give you an idea on how to make your own configuration.
When you have ensured that your sound is been set up correctly then you can start with the most basic mplayer configuration. You keep the /etc/mplayer/example.cong configuration file totally commented out (like you have atm) and your ~/.mplayer/config should only contain
ao=alsa
ok i just followed the wiki and your advices and doesn't work, yet
mplayer -ao alsa /dati/Musica/StudyDue.mp3
MPlayer SVN-r36498-snapshot-4.8.2 (C) 2000-2013 MPlayer Team
206 audio & 433 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /dati/Musica/StudyDue.mp3.
libavformat version 55.19.104 (internal)
Audio only file format detected.
Load subtitles in /dati/Musica/
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 22050 Hz, 2 ch, s16le, 32.0 kbit/4.54% (ratio: 4000->88200)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO_ALSA] Playback open error: No such file or directory
Failed to initialize audio driver 'alsa'
Could not open/initialize audio device -> no sound.
Audio: no sound
Video: no video
Exiting... (End of file) -
My sound doesn't work, how do i reset my mac?
my sound doesn't work, how do i reset my mac?
Reset PRAM. Some sound settings are stored in P-ram.
Check System Preference > Sound > Inline Speakers is highlighted. -
After upgrade my iphone 4 to IOS6, sound doesn't work correctly
After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio -
In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?
Hello Kiira Doon,
The troubleshooting steps detailed below may help get your iPhone's display to function.
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
My iphone 5c the sound doesn't work only with earphone.
my iphone 5c the sound doesn't work it works only with earphone.
Hi there lavodette,
You may find the troubleshooting steps in the article below helpful.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
-Griff W.
Maybe you are looking for
-
hey, 2 days ago I made a pages file and since yesterday I couldn't open it any more. When I want to open it it says the file couldn't be read. it has no valid (??) format (sry i had to translate it from german). there are also other older files that
-
Excise Details are not capture in Excise invoice(J1IIN)
Hi, I have created billing document where in account document I can clearly see BED , AED n SED but when I will create excise invoice in J1IIN with the reference of Billing doc. I can not see BED ,AED n SED capture in J1IIN, below errors are showing
-
External hard drive not picked up
Hi there, I have a Macbook Air 2012, I have been using a ADATA Nobility external HD with it from the start. Now out of the blue my mac does not want to detect it. I have looked for it under disk utility etc etc. but still can't find it. I have return
-
Amazon has a refurbed I pad Air with this remark. Item cannot be activated because of cloud lock previous user login unknown. Is there a work around or is it best to forget this one and move on?
-
Do I need to Log off iMessage and iTune before erasing MacBook?
I am selling my MacBook with Yosemite installed. I have been using iMessage and iTune, but erased the hard disk before logging off iMessage and iTune. It now starts in a setup screen as factory setting. Do I still need to setup and manually log off?