My iPad sound don't at all. I need help
My iPad sound don't work at all .
Do you get sound though headphones, and have you got notifications muted ?
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085
If not, and if you get sound through headphones, then have you tried inserting and removing them, and/or tried a soft-reset of your iPad to see if you get sound after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
Alarm goes every 10 mins, overrides sound off. Checked all programs, no help.
Alarm goes every 10 mins, overrides sound off. Checked all programs, no help.
Siren is a basic 3rd party sound used by OSX since early days, not in Sounds Prefs.
Sys Prefs have been fully checked, all Login Items disabled.
Checked all the /lib/sounds folders. Only 'as installed' audio files.
No problems until Mountain Lion was installed and probably reorganised something. -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Can't activate iPad after getting it from repair. Need help quick!
I recently broke the screen of my iPad but the hardware was working very well. Today I got it back from the repair service I gave it to (not Apple store), and when I turn on the iPad, it tells me to activate the iPad using my Apple ID, I enter all my info correctly, but it doesn't unlock. Did they give me a wrong iPad, did I get scammed? Please I need help quickly since I will be leaving the town after 3 days. Thanks for any help
Do you have the serial number of the iPad you purchased & sent in for repair? If so, look on the back/bottom of the iPad to see the serial number of the iPad you have. Does it match?
Cheers, Tom -
I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.
Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing. -
Ipad mini (wifi) ios 6.0.2. need help to downgrade.
i need help with how to downgrade my ipad mini (wifi) ios 6.0.2 back to 6.0.1... i have watched so many videos on how to do this and downloaded alot of firmwares for this and used those with itunes and redsnow and i still cant figure out how to downgrade. i need some help.....
Apple does Not support downgrading your version of iOS in their devices. Sorry
-
Can anyone help me I downloaded drake ablum and it said it comes with digital booklet but I don't see it and I downloaded the iBook and still don't see it I need help
Your iTunes Digital Booklet should appear on the PDF shelf in iBooks.
-
Video/sound don't match all of a sudden!
Adding some sound and music to a 20 minute movie using Logic. Things were fine for a while but now the video is slightly behind the audio. Can't figure for the life of me why. Any help?
many thanks for reply. but i'm finding that even if i redo it, add movie than import audio, they still don't match up and i'm sure they did in the first while that i worked on this. how weird. any thoughts are MUCH appreciated.
-
Siri,sounds,alarm, videos not working. How do I back up my iPad and how do I do a factory reset?
Try this:
Make sure IOS is updated to latest version
(How to update your iOS device
http://support.apple.com/kb/HT4623)
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766 -
hi i hawe no idea what to do my ipad after up dated and its cumpletly black icant do nothing
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT1349 After installing windows 8, I have no sound on my mac desktop. Need help?
Hi,
I recently installed Windows 8 and after the installation there is no audio (sound) in my iMac. I can't hear youtube videos, mp3 files, no nothing.
Suggestions to solves this problem?As you sure that you don't have system sounds muted? If you have sound in the music app, then system sounds are muted.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
No output sound from output port/analog audio: Need help
hello, I want to connect my analog audio equipment to my iMac. I have done this in the past with my old G3. I have connected the RCA cables to a 3.5 mm jack and put it into the audio input port, which was what worked on the G3. When I open the sound page for input & output, on Output I can see the volume bar thing moving in relation to the sounds from mic, turntable, etc: all the analog audio things. However, there is no actual output of sound through the iMac;s speakers or a headphone. The output page is pretty simple so I am real sure I have all the rigt things checked, unchecked etc. Any ideas? Thanks.
I had what sounds like a similar problem to jazzzrat. i had my macbook setup to a stereo and it worked for over a year. suddenly no sound came out of the stereo. in my case, it definitely was a software setup thing.
plug in your stereo jack into the audio out port. then go to system preferences-->sound-->output. on there you should see, under "device for sound output": Name=Headphones, port=built-in output. (if you see name=built in speakers, you plugged in the wrong plug). Now go down to the bottom of the window and UNcheck the "mute" box, and make sure the volume slider is midway or more.
For some reason, mac allows you to mute the "headphones" and "built in speakers" selectively. we have no idea how that box got checked, that remains a complete mystery. but when we eventually found -- and unchecked -- the box, our stereo output came back just fine.
i hope this works for you. good luck and have a good new year. -
Hi, My english its not perfect but i'll try to explain my situation. I bought an iPad air with a problem in the monitor, yellow stains in the border with black screen and i went to an official apple repair in Portugal and they sent me for the third time an iPad with the same problem and with more problems like white graphics lines in the animation horizontal/vertical switch sides of the iPad view. At the fourth iPad that was sent with the same problem, Apple refused to replace for another iPad and said to me that was not their problem anymore and now I'm going to sue the company because nobody in Portugal can solve this situation in the costumer line. Im very sad with that, but i'm going till the end. I BOUGHT an iPad with FABRICATION PROBLEM and you guys don't care about to fix it. Thanks.
What should i do more??crusherPT wrote:
Ok, but i can't find the email of apple ireland. Someone have it?? i can't make a phone call to their line because it's not free from Portugal.
Apple doesn't do support by email. All the contact information that is available can be found by using the Contact Us link at the bottom right of every page.
If the call is not free, you may need to pay to call them. -
Reflection function is not working, unable to click on it at all. Need help! Setting problem?
Hi all, I seek for your kind expertise advise on my Keynote. Once I've chosen a slide to open, any type of slide at all, my Reflection button or function is unable to be clicked on to perform that function. However, Shadow function facing no problem.
I can see the Reflection button but it's blurred like not allowing me to click on it at all. Is this cause by some software problem? Or setting problem? iWork has just being installed.
Appreciate your expert advice and help!Thanks Kelly... That's very helpful. Appreciate that very much!
By the way, if I may ask further, do you know how to how to make the animation like Steve Jobs did during his presentation on Ipad or Ipad2 where the "word" will drop from top onto the centre of the slide with effect or sort of like smoke or dust floating off and dissolved at both sides of the "word"?
Will be more than grateful to be hear from again! Cheers and thanks again. -
Hi All,
I have some problems on the below questions scenario;
Program 1
You are to write a program using a method other than main. The program is to
� collect monthly rainfall figures for 12 months
� pass the total annual rainfall to another method which calculates the average monthly rainfall and returns it to the main method
� calculate the variation of each month from the average (as a positive)
� display the results
Sample input screen
Enter rainfall for month 1: 13.3
Enter rainfall for month 2: 14.9
Enter rainfall for month 3: 14.7
Enter rainfall for month 4: 23.0
etc for the 12 months jan-dec
After the 12 months of data has been collected as report as follows is displayed:
Annual Rainfall Report
Monthly average: 15.04mm
Month Rainfall Variation
January 13.3 1.73
February 14.9 0.13
March 14.7 0.33
April 23.0 7.97
etc for the year�
Problem 2
You are to make major improvements to last week�s program.
The format of your program and some key elements should be as follows:
public class Rainfall
public static void main()
Create an array for monthly rainfall
Loop to collect rainfall figures from user and store in array
Loop through rainfall array
Call printRainfall method passing month number, rainfall for that month, and average as parameters
printRainfall method
Create an initialiser list array of month names
(ie hard code the month names in your program)
Print report headings
Use the parameters to access month names array and print report detail line
I have problems with the Problem 2 which i can't loop up the input values and printouts using aarays to do it.
Can anyone out there help me to solve the problems ? If possible, please reply me at my email @ [email protected] .Lotsa thanks.
Thanks and Regards.So why don't you tell us exactly what's going wrong and show us the code where it's going wrong.
Maybe you are looking for
-
How to delete projects from Vault
Ok, here is the issue. I work remotely on a laptop and my main library and vault are on my home computer. I only keep the last couple of projects on the laptop and use the vault to backup those projects. I used managed files. When I get home from the
-
Firefox won't start, there is no error message and it is not already running.
Hi, When I try to click on firefox, the little wait icon appears and then disappears. Nothing opens, not even safe mode. I've looked at the "Firefox won't start and there is no error message" help section and looked at my task manager processes. It s
-
Calling an ABAP web service from a web dynpro
Hello, I based my application on the: "Creating an E-Mail Client Using Web Dynpro's Adaptive Web Service Model" tutorial but when invoking the web service I get this type of error: Exception on execution of web service with WSDL URL 'http://mySAPBack
-
How to do ABAP Query Transports?
-
AVI Files over 00:01:30 are truncated.
I'm trying to import some converted GoPro AVI files that come in at about 00:08:52 each. When I import them Premiere truncates the files at about 1 minute 30 seconds. No where can I find the max supported AVI file size. But I'd like to know. There