My ipad sound is not working after cold weather

Please help if there is any way to fix this i have been to a country where it was aroun 10-20 degrees celcius and after i came back from hollidays my sound turns off and i cant turn the volume up or down it just shows the sound icon then after a after time it turns back again but now is gone more serious sound is off nearlly all of the time

By the way the same thing is with headphones

Similar Messages

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • IPAD-2 passcode not working after upgrading to 5.0 today

    iPAD-2 passcode not working after upgrading to 5.0 today

    Ditto here.  Searching all over the web site for an answer, haven't hit paydirt yet.  Meanwhile, I'm plain old locked out.
    Bill

  • TS2634 iPad sound is not working what should I do

    iPad sound is not working what shud I do

    Solved my problem straight away - cheers!
    King_Penguin wrote:
    Does it work in any apps e.g. Music and Videos but not others ? If Music and Videos still have sound then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • My sound is not working after downloading windows 10

    My sound is not working after downloading windows 10 please can you help me?

    right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

  • My ipad sound is not working except when my head phone is connected

    Plz help my ipad sound is not working but is when I put headphone.the sound comes when I activate Siri but otherwise no sound comes from ipad. the volume button is not workin but it used to. The slider thing to increase volume in the task bar is halfly gone means that dot is not there to increase volume

    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • Alerts sounds are not working after upgrading to iOS 7.1.2

    Hi,
    I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
    I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
    Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

    I got this issue resolved.
    It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
    It has been fixed by cleaning the charger slot by toothbrush! with some
    drops of a cleaner.
    Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

  • My iPad orientation is not working after the IOS 8 update.  Please fix this bug!

    my iPad air orientation is not working after the IOS8 update.  Can you fix this bug? Thx

    Did you try a reset?
    Restart / Reset
    http://support.apple.com/kb/HT1430

  • Ipad camera app not working after update 7.1.1 and using skype on video call

    Hello,
    i updated my mini ipad to ios 7.1.1
    then i used skype for video call...
    It worked fine for a few minutes then the front camera stopped working
    Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
    instead rear camera was working...
    Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
    Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
    i cant record a video, only camera for snapshots is working...
    any suggestion?
    is it possible to uninstall the camera app and try to reinstall it?
    Thanks!

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • [SOLVED] Sound (snd_hda_intel) not working after resume from suspend

    Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
    Running the following brings back the sound, but that is obviously a hack:
    fuser -k /dev/snd/*
    rmmod snd_hda_intel
    modprobe snd_hda_intel
    /etc/rc.d/alsa start
    I have on my /etc/modprobe/50-sound.conf:
    options snd-hda-intel model=laptop
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    Here's the exact hardware specification:
    # lspci -nnv|grep Audio
    80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
    Any idea where to look for this?
    Last edited by yhager (2009-08-21 16:54:00)

    [SOLVED]
    I downgraded to kernel 2.6.29 and the problem is gone.
    Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

  • Ipad 2 3G not working after update to ios 5

    hello,
    I updated ipad 2 3G to new ios5 after that 3G service is not working. i am living in saudi arabia.
    thanks
    farhan

    i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

  • Sound effects not working after upgrade

    After upgrading to Yosemite, my system sound effects are no longer working. Instead of hearing my selected Basso sound, my entire screen flashes.  Other sounds, such as the audio track of a video, still work fine. If I use the "afplay" command I can hear a system sound. I also get sounds for incoming and outgoing mail.  But clicking one of the system alert sounds in the "Sounds" preference pane does nothing audible, and in other places where I used to get a Basso sound,  my screen flashes instead.  I'm aware of the Accessibility option that gives the screen flash in lieu of an audible alert, but that is turned off, and I have tried turning it on and back off again, to no avail.  My "Alert volume" is all the way up in the "Sounds" preference pane, and I've slid that back and forth too.
    Can anyone suggest a way to reset whatever got confused in the upgrade, and get my alert sounds back?
    I'm on a 13" mid-2009 MacBook Pro, if that matters.
    Thanks!

    I had same exact problem - Reset PRAM and not works fine. I followed instructions here, and step 5 fixed it: http://www.iphonetopics.com/no-sound-after-upgrading-to-os-x-yosemite/

  • Ipad sounds is not working, for instance key board does not click anymore

    My iPad's sounds are not all working properly.  For instance, I can watch video clips and hear everything, but some apps do not play sounds or when typing on the keyboard, no clicking.  The noise it typically makes when  you plug it in to charge is gone as is the click sound when opening the screen.  Can anyone provide any help or insight as to what may be causing this?  I have looked in settings/sounds and all is correct.
    thank you.

    Is Settings > Sound > Keyboard Clicks ON?
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

  • IPad sound games not working

    My iPad sound works fine for video and music but on many games like angry birds and others there is no sound. Yes I made sure the games weren't on mute.

    The games are not on mute, but system sounds on the pad are muted.  If you have the side switch set to mute(as oppoed to rotate) flip it and see it the sounds are back.  If you have the side swith set on rotation, then double tap the home button, swipe all the way to the left, and change the mute there.
    The mute function only controls system sounds, not music or videos.  Some games use those sounds for game play.  You can be muted and never even notice in general usage, until you notice the lack of sounds from a game.

  • Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

    Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
    First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
    How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

    Welcome to the Apple discussions.
    First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
    If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

Maybe you are looking for

  • "Invalid directive" error when running a JSP

    I am getting following error while trying to run a JSP: org.apache.jasper.compiler.ParseException: /jsp/hellobean.jsp(0,4) Invalid directive ... followed by trace below... at org.apache.jasper.compiler.Parser$Directive.accept(Parser.java:214) at org.

  • Solve this Dynamic sql problem

    hi i am sending the table and the contents in the table and what i want from the table. SQL> descr sswms_rule_components; Name Null? Type RULE_COMPONENT_ID NOT NULL NUMBER RULE_COMPONENT_CODE NOT NULL VARCHAR2(30) RULE_COMPONENT_NAME NOT NULL VARCHAR

  • It says that "itunes quit working"

    everytime i open it it says itunes quit working ive uninstalled and reinstalled and also i did the same with my quicktime player

  • ORA-31127: RCList cannot contain noncommitted resource configuration

    Dear all, When I execute dbms_xdb.deleteresource, meet the error: RCList cannot contain noncommitted resource configuration. From the online manual, I notice that "Before performing any operation that uses a resource configuration file, you must perf

  • BI - ABAP To pick the field from One table and link with 2nd table

    Hello, I am stuck to write the correct abap code. Requirement is that My Client BMW  California require the below: <b>1.</b>  list of invoices (BELNR) that a has tcode = FB01 and FBVB" from Table BKPF.  Account Number field (BELNR) is there in 0fiap_