My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

I'm having the same problem?

Similar Messages

  • I am unable to open new tabs, in any way I attempt to do so. I have checked the settings and they are fine, so it's not those. The only way I can open a new tab is to right click on a link and instruct it to open in a new tab.

    Any way I attempt to open new tabs, be it clicking on the new tab button or using the short-cut Ctrl-t, I am unable to open any new tabs on my browser window.
    The only way I have found that I can open a new tab is to right-click on a link and instruct that link to open in a new window.

    Try disabling the Ask Toolbar extension.

  • My sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal

    Hi 
    could you please help me as my sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal

    Hi john00000001,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Cheers,
    - Judy

  • TS3274 my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • My mac os x wont switch on and have checked connections and fuse and they are fine

    my mac os x wont switch on and i have checked connections and fuse and they are ok what can i do next

    What model of mac are you using?
    Verify power outlet works.
    Query by serial number
    Apple's warrenty database will identify the type of Mac you have.  Your serial number is securely sent.  Provides more information for newer machines.
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    This site provides more information.  Best for older machines.  Note, serial number is sent in the clear.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php

  • Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

    Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

    Please read this: Adobe Lightroom - Find moved or missing files and folders
    You do not want to be in the Import section of Lightroom, you want to be in the Library Module. You don't want "Update Folder Location", you want to ctrl-click on a Folder name (not in Import, but in the Library Module Folder Panel) and select "Find Missing Folder"
    You do not want to re-import photos that have already been imported, this is almost always a bad thing to do.

  • My ipad 2 keeps turning off and on

    So my little brother is playing with my ipad 2 and he keeps playing until the battery is drain to 5%, when I try to charge it, it turns off(or shut down), normally I think it is common 'cause of the drained battery, but when I charge it, the big battery logo with red lines(indicating that there's only few battery power left) showed up( I think it's charging) and without turning it back on, the apple logo showed up, and I think it turn on automatically, but when the moment it turn on, it keeps turning off again...This problem keeps repeating from the big battery logo and turning off again.
    I dont know how this is happening, This is the first time this happened.
    The only reason I'm thinking is, "does my ipad battery or my charger is slow in charging and when it charged a few percent of battery and turn on again it drains the charged battery again?" Any help is appreciated, And sorry for my bad english( english is not my mother language). Thanks in advance..

    Hi GreeD28,
    Thanks for visiting Apple Support Communities.
    You explained the situation very well, and it sounds like you are seeing this image flash on the screen when charging your iPad:
    If so, you may just need to let your iPad charge for longer before using it, as explained in this article:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    This image means that your device is charging.
    It's important to note that if the battery is extremely low on power, your device may display a black screen for up to two minutes before one of these images appears. Continue charging for at least 30 minutes, or until your device is fully charged.
    If you have charged your iPad and it still shows the screen above or turns off after the Apple logo appears, try these troubleshooting steps next:
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Best Regards,
    Jeremy

  • Sounds Keep Turning Off

    I've discovered during the past couple of weeks that my interface sounds (clicks at login, locking sound when pressing the top button, etc.) have been consistently turning off. I can reactivate them by reselecting my ring tone, which forces that sound to play, and that reactivates my Text pings, login clicks, and the like, for a while, but then, sure enough, those interface sounds turn off again. Going into Settings/Sounds and turning off the keyboard clicks and then pressing the slider to reactivate the clicks doesn't work. Only reselecting the default phone ring is enough to reactivate the interface sounds that all show they're supposed to be on.
    I've tried graceful shutdowns and hard resets, to no avail.
    This is a first generation iPhone with OS 3.0 running and about 2.4GB free storage available.
    Anyone else experiencing this issue?
    Thanks for listening...

    My iPhone's been out of its dock (the two port version that came with my Apple Bluetooth Earpiece) all afternoon, and the sound has been fine with all interfaces effects clicking away normally (after I reselected the default ring sound initially).
    Because I had noted that others have reported sound issues after using their docks, typically after they inserted it into the dock and got the message that the device wasn't compatible (which it certainly had to be since it was from Apple), and since I had also observed this message popping up lately when I docked my iPhone, I got out my USB cable connector and tried it this time before putting it back into the dock. The USB cable plugged into my iPhone and the charging transformer as expected, the iPhone made the connecting sound, and proceeded to recharge my iPhone correctly. So, I unplugged it, and looked carefully at the dock's connector pins, which appeared to be OK. I gave the pins a hard blow, just in case some dust was causing the issue, and plugged my iPhone back into the dock.
    The iPhone made its dock connecting sound, the battery appeared on screen, and the charging symbol appeared in the top right corner, again, all as expected. So, I unplugged it and re-plugged it in several times, trying to see if I was going to get the Incompatible Device message, and tested the interface sounds several times. All seems to be working correctly, at the moment.
    So, my hypothesis at the moment is that the problem I've been having over the past couple of weeks is not software related, but potentially hardware related, specifically to the Apple dock connector itself. I can't be sure at this point, but I will be testing this if the Incompatible Device message appears again and I start having the sounds turning off issue again.
    For now, I'm marking this question as answered.

  • Alert volume sounds keep turning off by themselves, no alert sounds

    seems to happen after restart. I don't have "things.app".

    Open up a new account to check if your issue happens there.
    Check your alert settings in System Preferences/Sound then disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select *Disk Utility.*
    Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
    Click _*Repair Disk.*_
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

  • My ipod touch 4th keeps turning off with a full charger by its self got white screen and was frozen for hours and the volume rockers wont work some most ??

    i have had my ipod touch 4th gen for 6montha i had to take my first one in becuz of the headphone jack broke off now they handed me a brand new ipod so its still under warrentie but it will shut off on its own with a full charge  and home button keeps not responding and got a white screen two days ago i was listeningto aome music earlyer today and the volume rockers would not work im wondering if i should bring it in

    Try this to get it working
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    If you get it working, then restore to factory settings/new iPod. If you still have the problem then time for the Genius Bar.

  • The wifi on my  iPod keeps keeps going off. I am going to settings but it is not allowing me to click onto my own home hub? Really frustrating

    The wifi on my iPod keeps going off. I go to settings, turn wifi back on and click on my home hub in choose a network zilch!!! message pops up 'Unable to join the network'!! Can anybody please suggest a solution. I am not really a tech type but if given clear instruction I may be able to solve this menace. Thanks

    Try:                  
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT4623 How do I turn off aps with my new updated software?  They are not turning off like they used to.

    I just updated my software, now I don't know how to turn off aps.  I used to double tap the home button then hold down the ap until it shakes and the minus signs appear.  Now, I get no shaking and no minus sign.  What do I do?

    This short video show you how to do it:
    http://youtu.be/4cQNjSsd1xg
    It's a youtube video showing how to close apps in ios7 for iphone or ipad and save battery life.
    For those who like visual demonstration, hope this helps.

  • When I log into my yahoo mail, I also log into messenger and chat via there, but the last two days I can't get my IM window to come up. It says Java script on the left corner, but I check those settings and they are on. So what else could be the problem?

    My contacts list comes up, but when I click on the person's name I want to chat with, the IM boxes doesn't pop up like it used to. I checked java script and that is on, I even opened up I.E. logged into my email, clicked on a name, and what you know, the IM box popped up and I can chat. So what is the problem here?

    Its known issue, see;
    * https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    please open a bugzilla account and add your email in cc list if you want to follow the bug?
    Someone having the problem, but when he upgrade Java runtime, his poblem was fixed, make sure your JRE has been up to date?
    Also maybe this bug is fixed in nightly?
    * firefox.com/beta

  • My mac books sound keeps turning on and off while trying to listen to music and it won't let me sample songs on amazon. Can anyone help?

    My Mac Pros sound keeps turning off and on while listeneing to music and it wont let me sample songs on amazon. Can anyone help?

    Hello tactech,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Best of luck,
    Mario

Maybe you are looking for

  • IS it possible to share external hard drive Mac To Mac, over a PC network,

    I would like to explain this situation in it's own post so it's clear. I am at my brother's house (PC user) and both my wife and I are Mac users who are on the network. I have an external hard drive which is plugged directly into my wife's Macbook. I

  • Hard Drives Not Mounting - Help!

    Hello, This is my first post, so please forgive me if I leave anything out.... I recently had to replace my hard drive. Got it all going, then I noticed when I went to put a music CD in, that it would not show up. I tried others with no luck....then

  • Black video window trying to share video from elgato video capture connected to a sony pmw-ex3 camer

    Hi, Im trying to share video on adobe connect with "elgato video capture" usb plug in capture card, connected with a sony pmw-ex3 professional camera on a Lenovo windows 8 laptop, but the video window appears on black. I have tried to change the reso

  • KSB1 - Incorrect line item selected on drill down

    Dear Guru's To set the scene we have been using KSB1 for a long time.  Now something odd is occuring - but what appears to be quite randomly. When we run a standard KSB1 report and drill down to line item detail we are getting the wrong (and complete

  • Can't Swap out image in PDF

    I have Acrobat CS3 on Mac, and I know nothing about using the app. I am trying to swap out an image in a PDF. I have poked around the interface quite  bit, but nothing works. I seem to be able to select the image, but the only options are to copy or