My ipad stays black and can't switch on

My ipad stays black and can't switch it on.

Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More Info here...
https://discussions.apple.com/message/19521062
The principle is the same.

Similar Messages

The iPad suddenly went black and we cannot switch it on again. Can someone help?

The iPad suddenly went black and we cannot switch it on again. Can someone help?

4:30 PM 15/11/2013
This exact same thing happened to me too yesterday and trying what you said has just fixed it right now! Lucky I happened to come across this discussion while looking for a solution and has saved me a trip to Genius Bar tonight.
Thanks very much for the solution!
This problem has never happened before and I have just updated to iOS 7.0.3 about 2 weeks ago, so wondering if it may be an iOS 7 issue...

My ipod is on you can here the sounds and everything but the screen stays black, what can i do?

for days my ipod 4g screen has stayed black and i plug in the charger i can hear the sound just cant see the image it just stays black what can i do? is ti broken? what part needs to be fixed?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

HT1414 iPad went black and has the apple logo with a little wheel at the bottom. Cannot be turned on or off just stays there.

iPad went black and has the apple logo with a little wheel at the bottom. Tried turning on and off doesn't work.

Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

I was charging my iPad2 and when reaching 90% it just went black and can't be started again. Anyone that have had this problem and know what to do?

I was charging my iPad2 and when reaching 90% it just went black and can't be started again. Anyone that have had this problem and know what to do?

I have had this problem several times. The iPad comes off charging with a black screen and only a hard reset works to get it back. Then you have to go to settings to be sure nothing changed there.
I have had serveral hard resets and three restore operations and the problem recurs. I am not sure if it is the iPad2 or an app that is causing the problem. So far I can live with it as is.
Jay

My camera stays black and I cannot use. Anyone know how to fix this?

HOw do you fix your camera app when it just stays black and will not reset

Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

HT4528 While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me. How do I get it back to normal?

While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me. How do I get it back to normal?

"If VoiceOver is on and the screen is black, but you can still use the device by pressing volume up and volume down, you may have screen curtain on. Try triple-tapping using three fingers on the device display to turn off screen curtain. Or connect the device to iTunes"
http://support.apple.com/kb/HT3577?viewlocale=en_US&locale=en_US

My iPad went black and shows a picture of the power source pointing to a iTunes emblem

When I went to install an update, my iPad went black and shows a picture of a power source next to an iTune emblem. I powered it off but when I power it back on, it shows the same thing.

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Lion mountain newest update :I loos the internet connection, but the network shows connected. And IPhone, IPad stay connected and work. Only the MacBook Pro , which worked perfectly before with Lion unless I updated to Mountain. I have tried everything.

I have a MacBook Pro, Early 2011, 2 GHz Intel Core i7 which I udated some days ago with Lion Mountain 10.8.2. Before it worked just perfect. Now, since the update, I loos the internet connection after a wile, (at the beginning every 20 sec, now up to 4 hours) even that the sign of the WiFi network connection shows to be perfectly connected.
My other divices like IPhone, IPad stay connected and work. The rooter is new and cannot be the problem. I tried nearly everything I found on the bloggs, but nothing helped actually. It must be a softwear problem on Lion Mountain, what can I do?
Thanks for any help

I FINALLY SOLVED THIS ISSUE!!!!
New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi issue dissapeared! I tried it with wireless-N only, but it didn't work.
So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
*PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better.

T60p, can't go to desktop after the Windows Logo, only the cursor stays here and can move[pic]

My Thinkpad T60p can't go to desktop after the Windows logo, it has fingerprint, but never appears, only the cursor stays here and can move, the back ground is not black, nothing happens pressing Ctrl+Alt+Del or Win button.
Can go to safe mode but the same situation, the cursor is here, black background, nothing happens pressing Ctrl+Alt+Del or Win button.
After a long time of searching I guess the very most possible reason is system updating many patches guided by a software that lead me did that.
Thanks!
Dan
Link to image
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

If I was given this laptop to diagnose the first thing I would do is swap in another harddrive and confirm all the hardware works. If you don't have another drive to boot from you can use a Linux live-cd, it'll pretty much tell you the same thing and if the laptop works, your solution would be to either fix your operating system or reformat and start over with a new installation.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

MacBookAir 2013 cannot use the cam on yahoo messenger. I see the option but the screen of cam stays black and cam also has no green light

I did the latest software update and have the cam options to invite or view.
but screens stays black - I can see the other parties but they cannot see me
? what could be the solution .
thanks

I did the latest software update and have the cam options to invite or view.
but screens stays black - I can see the other parties but they cannot see me
? what could be the solution .
thanks

Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth

Just got a new Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth. I get to the stage where you have to confirm on both systems the generated code and then it goes in error. Not supported. Any clue ?

Unless you have an iOS app that uses BT for a specific purpose, such as file transfer, BT on the iPad alone, as stated, does not support it.

Ipad is black and wont turn on

My ipad is black and wont turn on the only thing i get a the apple icon in the center of the screen. I tried restarting it. It is fully charged and it is upgraded. Please help

Try a reboot first.
If a reboot doesn't work, try and force iPad into Recovery Mode (data will be lost)
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore

Bought an ipad mini black and iphone 5 black

After buying the ipad mini black and the iphone 5 black i am unimpressed at how easy the black colour scratches compared to the white I want to complain to apple because if I had of bought the white I wouldn't have this problem !!!

Well, there is no apple here, take it back to where you bought it.

My ipad stays black and can't switch on

Similar Messages

Maybe you are looking for