My iPAD stopped connecting to the 3G network and had a restore message then shut it self down, when i tried to sync it won't let me finish as my iPAD is password locked but I can't get to the password screen,
My IPAD stopped connecting to the 3G network, I then got a restore from I-Tunes message and the iPAD shut itself down and then turned itself on again, so I synced and downloaded the new software but this did not finish as it needed a password on the iPAD but I could not open the iPAD to the password page, it just stays on a connect to i-Tunes page. Please help
tried all that and was looking good with new software etc downloaded and then got a message in iTunes."we're sorry we are unable to conitue with your activation at this time etc " tried process again and got to the same message. iPAD still has the connect to it tunes screen ..any suggestions?
Similar Messages
-
My Wireless KB and mouse are stuck in discovery mode, but I can't get past the "user password" screen because It won't allow me to enter characters.
Should work if you enter the code and hit the return key. Here is a step by step article.
http://support.apple.com/kb/HT1809?viewlocale=en_US
Captfred -
I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???
I do NOT like using my credit card if I don't have to, and I went out of my way to go buy an Apple gift card, which I successfully redeemed into my Apple account. However, when I use the Apple "Cards" app, it will not let me use anything other than my credit card. I tried purchasing a card, hopefulling it would come out of my Apple store balance, but no such luck -- it came out of my credit card.
Apple is becoming more like Microsoft every day. -
I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log
Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
I am trying to update my iphone 4 to ios 7.2 but I can't get beyond the "connected to itunes" screen - once I sync - nothing happens. Advice?
Hello hfb8,
I would be be concerned too if I was not able to update my iPhone. If you have not resolved the issue, I recommend following the steps in this article for an issue like this:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My wi fi is connecting up fine on my ipod but i can't get onto the internet
My wi fi is connecting up fine on my ipod but i can't get onto the internet. My ipod has been working fine until now and i have tried re- setting the network settings and all the other options that have been given but nothing seems to make any difference. If i try to get onto internet at all on my ipod, for instance, facebook and safari it will just come up no internet connection, even when the bar is full at the top. Can anyone help ?
Despite the WiFi sign at the top you may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If this problem continues you should test your iPod on some other networks. Since you say your iPod was "working fine" either it or your router may have developed a hardware problem. If the iPod works OK on other networks your router may have a problem.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?
Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work
-
Airport Exopress light is solid green, but I can not get on the internet. Does anyone have a suggestion how to fix this?
Would you please provide some more information about your current network so that we can help you? For example, is your AirPort Express the only router in your current network configuration? That is, is it connected directly to a broadband modem or to another router upstream of it? Regardless, what is the make & model of this modem?
When changing network equipment or when setting it up for the first time, it is always a good idea to perform a completer power recycle of your networking equipment. Please check out the following AirPort User Tip for the details. -
Hi,
I am about to pull my hair out. My itunes account has been disabled............or at least that's what it says everytime I want to update my apps....I can't do it. Then it sends me to a useless web address www.apples.com/itunes/storesupport/forassistance it never helps me. I've changed my password, etc. But I can't get my apps updated or the "Apple" in the sky to fix it...I don't know where to go for customer service....Any suggestions?
Thanks
KathyI updated the software on my iphone4 tonight and ran into this same endless loop - "itunes terms & conditions have been changed" - go to itunes, aceept - back to the "T&C have been changed message" with no ability to do anything in the app store until I accepted the new terms.
While not a very direct solution, I was able to finally accept the terms in a way that seem to register with apple by making a purchase through iTunes on my computer. This forced me through updating my payment information and updating my iTunes software to the latest edition (which I had not yet taken the time to do). After doing both of these, iTunes took me through the terms & conditions on two separate pages, but ultimately allowed me to purchase my song. Once I completed these steps, it fixed the problem on my phone, so now I can update my apps and download new ones without running into that loop.
Hope this helps!!! -
My laptop connects to the internet via my wireless network at home. My ipad will not bring up the internet using the same connection. It shows in the wi-fi settings as connected but when I bring up safari, nothing comes up. Any ideas?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My ipod touch 4th generation has recently been telling me I need to connect to iTunes (i think). It has a symbol with a chord, and an arrow above it pointing to the iTunes logo. So I re-downloaded itunes, and I plugged it in to my computer. It told me that iTunes couldn't connect to my iPod because it is password-locked, so I have to put in my password. But I can't do it because of the stupid picture on the screen! I tried turning the iPod on and off, I've looked up and down the internet, etc. etc. The thing I thought might actually help was to put it in recovery mode, but I've tried that too, although the instructions weren't very clear on the apple website and I doubt the way it told me could have worked anyways. I NEED HELP QUICK!!!!!
If anyone could find a video on youtube telling us how to put it in recovery mode, that would be awesome too, but solving this quandary would be better.Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
How do I make a purchase from the iTunes store using a credit I have? I can't get past the payment window, and don't want my credit card charged instead of my credit.
same here but i cant purchase a movie or anything
-
I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
Thanks for any advice you can offer!I have tried all the above and nothing seems to work. Any other suggestions?
-
I just want to use the phone as a web browser using wireless, I don't have verizon, I can't get past the set-up screen. Can I use the phone without a verizon account?
I took it to Verizon and a counter person got it to work. she said one has to be persistent and eventually the screen goes away that was demanding the phone number I didn't have, it works now I'm happy
-
I have photoshop cs6 on a pc. My computer guy took my old c drive and cloned it to a new one and installed it. now when I go into bridge it won't let me do any editing. I can't put stars or colors on the photos.
>I am trying to load my new programs onto this laptop
Actually, no you're not. You're trying to load old programs on this computer - programs that are based around the old (dead?) Mac OS 9, not Mac OS X.
The main problem is that Mac OS X no longer comes with Mac OS 9. If you want to run Mac OS 9 applications you can, but you'll need to source a copy of Mac OS 9 and install that before you can. Off hand I don't know of any sources for Mac OS 9.x. Apple no longer sell it. eBay might be an option.
Either that, or just use Mac OS X applications. You'd probably prefer that anyway.
Finally, as an aside, this doesn't really have anything to do with AppleScript, so posting in the appropriate forum might get you better luck.
Maybe you are looking for
-
How to print a web template in background
Hi experts, i want to print a web template which includes 4-5 Queries over a background job for different Profit Centers (for example, for all Profit Centers that are in Region Europe)? How can i simply achieve this ? Thanks.
-
Hello, I am new to Oracle and I am having problems with this trigger: CREATE OR REPLACE TRIGGER myTrigger AFTER INSERT OR UPDATE OF aField ON myTable DECLARE myVariable NUMBER(2); BEGIN SELECT COUNT(keyColumn) INTO myVariable FROM myTable WHERE TO_CH
-
Fm modulator causing screen discoloration
I purchased a 20 gig Ipod Photo less than 2 weeks ago. I have tried 2 types of fm modulators in my car, a Belkin that plugs into the headphone jack, and a DLO Transpod docking type. The problem I have is that when I used either transmitter, it would
-
Service Type of a Service Call
Hi All, I am trying to do a small exercise from the SAP teched Webdynpro workshop. When I try to add a Service Call , then on the third step I see only one possibility of Service Type. I see only "Function Module"Radio button, whereas in the session
-
"Hook" to call RAS API's from PHP application
Is there a way to call the RAS API's from a PHP application to generate a Crystal Report PDF file? Examples would be helpful. Thanks!