My iPad stopped turning the image when I turn the iPad

Is there a setting for image to turn when you turn ipad

If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

  • MSO Slideshow does not stop, even though "stop at last image" is checked...

    Hey Guys,
    So I have a problem with MSO Slideshows. I am using Sprint 18 across the board, both in InDesign and on my iPad. Here's how the problem goes:
    - Build a MSO Slideshow with 3 states.
    - Set it in the overlay creater to be an autoplay Slideshow.
    - Check the box for "stop at last image"
    When I test it on screen, it works correctly. Then, when I upload the article and view on my iPad in Adobe Content Viewer, the slideshow plays, but instead of stopping at Frame 3, it goes back to Frame 1, and stops there.
    I tried every imaginable configuration of the buttons/check boxes in the overlay creator, and I cannot get this to work properly. Any one else expereincing this problem, and/or have a solution? Thank you very much.

    Doesn’t anyone bother to read?
    I’m sorry, but It’s getting quite frustrating answering the same question over and over.
    We now have about 15 threads on the same subject.
    If you had read back just a few posts you’d know there’s a bug causing this.
    Bob

  • Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

    I am Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.  I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream).  When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD.  All device are on current releases of software.  I have no Video hooked up to the Apple TV.  How do I correct this?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • TS1702 I am unable to download updates directly to iPad 2 , now trying to reinstall one from scratch but download keeps stopping and the restarting. Can you offer any advice, this happening when trying to download to laptop in itunes as well. Have tried t

    I am unable to download updates directly to iPad 2 , now trying to reinstall one from scratch but download keeps stopping and the restarting. Can you offer any advice, this happening when trying to download to laptop in itunes as well. Have tried to download on different broadband lines without success. Is this an apple problem due to high demand or something else?
    Everything has worked well until about a month ago, up to date iOS 5 and itunes installed. Tried resetting numerous times, turned off all apps still no joy. Ipad was great but now feeling buying one was mistake. Also recent music purchase was useless and tunes would not play correctly.

    Since this is happening on the iPad and the computer, it might be worth a try to reboot your router - unplug it from power for about 30 seconds and then plug it in again.
    Quit iTunes on the PC, reboot it and the iPad as well
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons

  • My iPhone 5 suddenly stopped opening the Apple Mail app.  It had worked flawlessly for years, but just stopped.  It worked on my iPad, and of course on the computer.  What's going on, and how do I fix it?  I've turned the phone on and off several tim

    My iPhone 5 suddenly stopped opening the Apple Mail app.  It had worked flawlessly for years, but just stopped.  It worked on my iPad, and of course on the computer.  What's going on, and how do I fix it?  I've turned the phone on and off several times, soft reset several times.  There was no change in any settings when this happened, nor any new apps were added.  Thank you for any help you can give.

    Does it not work either way? Sending and receiving? Did you check the settings and make sure that nothing has changed? If you can receive email, but not send it, check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • When trying to update my iPad 2 to iOS 7 I keep getting the message that it has stopped because the file is full.  There is plenty of room on the iPad.  It also says to check the settings.  What do I do now?

    When trying to update my iPad on iTunes I keep getting a message that the download has stopped because the file is full.  There is plenty of space on the iPad.  Also, the message says to check the settings.  What am I supposed to check in the settings?  What do I do now?

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • I bought a movie on my iPad. When it was stopped, by the cover pic/description, I pushed a small button thinking it was to finishing downloading but it deleted it. Now it says can't redownload and something about 90 days?? Help!! Just paid $20 bucks :(

    I downloaded Monsters Inc for my son for a car ride. It kept stopping towards the end with like 10min left. So I stopped it, went to the screen where you can choose to play it (where the movie pic and description are). I pushed the small butt on to the right of the pic, thought it was like iCloud or finish downloading, something along those lines. Well, it deleted it! In iTunes, when I push he iCloud button next to it because it shows I purchased it, it says something about already bought this and can't download to same Apple ID for 90 days, it says cancel or transfer. Even when I click transfer it didn't help. Please help!!!!! Just paid $20 for this!
    Oh it was under my husbands Apple ID too, if that matters. He uses that for his iPhone and the iPad.

    you can let apple know here
    http://www.apple.com/feedback/appletv.html
    and you can look here
    http://www.ebay.com/bhp/vhs-player

  • How to stop the dock from showing all hidden images when hiding then showing applications

    How to stop the dock from showing all hidden images when hiding then showing applications

    It's not really something to snap a screen shot of. I believe it would need to be a video clip. For instance, when I am working on multiple images in Photoshop, I often need many images open at the same time, but I only have one image viewable and active. The hero image is active on screen while I hide the other images in the dock by hitting the yellow - button on the images. Then I "Hide" Photoshop to do something in the Finder. When I go back to Photoshop, every image that is hidden in the dock will pop open again in the active window, not just the image I was currently working on. I want these images to stay in the dock until I need them, no matter how many times I Hide the Show Photoshop.

  • I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and

    I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and turning.

    Hi,
    Have you tried working through this document - it does apply to Elements as well.
    Sign in, activation, or connection errors | CS5.5 and later
    If you still have problems you may need to contact the Adobe activation team - see the "Still need help?" link at the end of the document.
    Good luck
    Brian

  • How stop PS6 from removing the DPI value from an image when using "save for the web"?

    How stop PS6 from removing the DPI-value from an image when using "save for the web"?
    Example:
    - Open a tif image, that contains a dpi value (resolution).
    - Use the splice tool in PS6.
    - Export the slices with "Save for web", as gif-files.
    Then the dpi value is removed, the gif files has no dpi value (it's empty).
    How can we stop PS6 from removing the dpi value when using "save for web"?
    OR:
    When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

    you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

  • Good morning There is a stop at the camera Please help me When you turn on the camera Shut down automatically

    Good morning There is a stop at the camera Please help me When you turn on the camera Shut down automatically
    I'm in iraq

    Adobe Reader is free. It always has been.
    You have obviously downloaded and installed Acrobat (30 day trial version) and the trial period has expired.
    You need to uninstall Acrobat (using the Control Panel and Add/Remove Programs or Programs and Features [Vista/7])
    Then run the Windows Installer Cleanup Utility http://support.microsoft.com/kb/290301
    to completely remove the Acrobat installer files.
    Then download Reader 9, install it, and go about reading PDFs for free.
    EDIT: Please, please please.... do NOT post a phone number in the forums.
    You're inviting trouble if you do.
    Not everyone who reads these pages is here to help fellow Adobe product users.
    Message was edited by: Mac+Win=Me

  • I want to import still images to make a stop motion animation, but when I try to change the duration of still images, it isn't reflected in the timeline.  How can I do this?

    I want to import still images to make a stop motion animation, but when I try to change the duration of still images, it isn't reflected in the timeline.  How can I do this?

    Tonaw,
    If you import your still images using iPhoto, then the time you set for each still, using FCPX Perferences works.
    You can set the durantion from 1 frame to as long as you want them view.
    If you do not use iPhoto to import your stills, the default is 10 sec's.
    FYI: This issue was brought up within a month after FCPX was released. They found out by using iPhoto, you had better control of the amount of time your still was viewed.

  • My ipad wont turn on it stops at the apple logo and i get little white wording that says this device is not using requires_boot_connect_on_reset

    My ipad wont turn on it stops at the apple logo and i get little white wording that says this device is not using requires_boot_connect_on_reset. Not sure what is going on. also says appleBCMWLANBusInterfaceHTSIC reset chip

    Try the following:
    1. Reset
    Hold the Sleep and Home button down until you see the Apple logo
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

  • Hello, My white McBook (2008 or 2009) recently stopped turning on.  When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound.  I've tried the re-boot option, but nothing works.  Please advise!

    Hello,
    My white McBook (2008 or 2009) recently stopped turning on.  When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound.  I've tried the re-boot option, but nothing works.  I first thought I needed a new battery because the lights at the back are all off, but shouldn't the computer turn on once the power adapter is hooked up and the light on the Magsafe adapter shows green?  I'm a computer doofus, so please be kind.  Please advise!  Thanks in advance.
    SS

    Take it in for service.

  • My iphone phone wont turn on and when i plug into computer it wants to restore then gets stops at the 'waiting for iphone' what do i do? not jailbroken not damaged? HELP!!!!!

    my iphone phone wont turn on and when i plug into computer it wants to restore then gets stops at the 'waiting for iphone' what do i do? not jailbroken not damaged? HELP!!!!!

    i have, its connected to my sisters computer,it starts to restore then says there was a problem downloading the software for the iphone, the network connection has timed out. what does this mean?

  • I tried to put ios 7 on my ipad 2 but then it took me to recovery mode then I got the new itune and tried to restore it but then it stops in the middle

    I tried to put ios 7 on my ipad 2 but then it took me to recovery mode then I got the new itune and tried to restore it but then it stops in the middle

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Maybe you are looking for