My iPad went black and shows a picture of the power source pointing to a iTunes emblem
When I went to install an update, my iPad went black and shows a picture of a power source next to an iTune emblem. I powered it off but when I power it back on, it shows the same thing.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Similar Messages
-
iPad went black and has the apple logo with a little wheel at the bottom. Tried turning on and off doesn't work.
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
My macbook pro went black and shows one folder with a ?
my macbook pro went black and shows one folder with a ? what should i do
What that's telling you is that it can't find the operating system.
A flashing question mark or globe appears when you start your Mac - Apple Support
Try that and see if it helps. -
I bought an iPod touch 4g and I plugged into my Mac to put some songs from iTunes on to it but then my screen went black then flickered then turned to a USB cable pointing towards a iTunes music note what could I do to fix it.
See the More Like This Section on the right...
-
I was downloading a Bosesoundtouch update on my iphone. Screen went black and now I cannot see anything.
Any suggestions?try a hard reset, hold the sleep.wake button and the home button down at the same time until the apple logo appears, it generally fixes this issue
-
i cant use my iphone it just went black screen
Hello there, JT F.
The following Knowledge Base article provides some great information for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Particularly:
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
RE: original version iPAD
Was having trouble with it shutting down. Now all I have is a black screen with the Apple in the middle, and it's making a "connection type" sound every few seconds.
Any ideas how I can fix this issue? Thanks for any help.Restart, reset, restore, return to Apple.
-
HT1414 my ipad mini screen went black and I cannot power it up. nothing happens
I have an ipad mini and I bought he keyboard for it, I synced the keyboard and the ipad screen went black and now I cannot get the ipad to power up at all
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My IPad went black and I can't get it to turn back on.
Danielle,
Quite simply hold down on the sleep button and the home button at the same time and wait until the Apple logo appears and the iPad completely reboots. Don't release the buttons until the IPad has totally started up again.
This does cure a lot of minor issues if you start to notice erratic behavior with your device.
http://support.apple.com/kb/HT4057 -
Screen went black and won't wake up
While using my Powerbook G4, the screen went black. I can see that the power's still on- the light on the screen release button is illuminated. But I have no display and cannot wake it up from sleep. Please help!
Try press+hold the power button and see if it shuts completely off, then try booting normally. If that doesn't work, you may have to remove all power (adapter+battery) to kill it, then try restarting normally.
-
i click s/w update in ipad after few mints its screen turns to black and showing itunes logo..plz suggest wht to do
Do exactly what the screen is telling you to do. Connect the iPad to your computer and launch iTunes. You either have to update the software that way, or you have to restore the iPad because something went wrong with the update.
-
I installed ios7 on my iPad 2 yesterday, this morning it wouldn't open the weather channel app. I thought maybe I should power it down. When I held down on the power button the screen went black and now it won't do anything. What do I do now?
Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
-
HT201412 My ipad screen remains black and show a persistent apple logo.
My ipad screen remains black and show a persistent apple logo. Sometimes it turn on and off automatically every 5minutes. I have already restored iOS software for 3 or 4 times. I have also seen with the apple genius supporter. The problem still remain the same. Does anybody have any suggestion beyond that? I dont know how many people are experiencing the same problems. Why dont apple solve this issue seriously? My rating to apple would become dramatically decreased to zero. I have decided not to buy apple product anymore.
We are not Apple here .. you should bring your concerns to their attention.
http://support.apple.com/kb/HT4623 -
I plugged my phone in my computer to download my pictures once it finished downloading I unpluged my phone and it went black and now won't turn back on. Please help me!!
Reset, hold both home and power buttons for about 10 seconds until the iPhone begins to start.
-
yesturday i bought a brand new iphone 4 and i got home and the guy i bought it from had alot of pictures and apps on it so i tried reseting it and whean i was reseting it it went black and hasnt came in since ive tride to hold power and home but dont work plz help
kawasaki-boss wrote:
yesturday i bought a brand new iphone 4 and i got home and the guy i bought it from had alot of pictures and apps on it s
How could it have been a brand new phone if there were already pictures on it?
I'd ask for your money back.
Matt
Maybe you are looking for
-
When a refund is processed from AR to AP, is there a way to issue the check to a different name and not the name on the receipt?
-
Space btw Key & Text in Report Designer
Hi All I have joined the key & text in a single column in Report Designer..But I need to give a space btw the KEY & TEXT of Charateristic Object. Anyone give me some ideas to achieve this. Thanks BI Learner
-
Trying to load ozone into adobe... and not kill myself.
I do everything like I'm suppose to up to the vst plug in manager and when I select the effects I want to enable and hit ok nothing happens. Nothing is showing up in the directx menu after, no new screen or menu is popping up, I don't really know wh
-
How to set multple values in cluster with local variable?
Hello all, Ok, I've made my way through Labview for everyone, and have some basic concepts down. I can see with a cluster, if acting directly upon it, you can unbundle, change values, rebundle, etc. I'm trying something a bit more complex...and just
-
Bookmarks are not automatically creating based on Word 2013 Table of Contents.
Bookmarks are not automatically creating based on Word 2013 Table of Contents. In older version of Word, the Style built Table of Contents converted into Bookmarks when PDFing.