My ipad went into recovery this morning wile trying to download ios 6.1.3 And i dont want to lose my pictures or text messages, because they are really important to me...... I NEED HELP PLEASE
Please help....... i dont wanna lose my things
iCloud backup the following:
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/bf829c49a3eb202c17 ed639d26a45d90.jpg
Similar Messages
-
After update my ipad went into recovery,
After latest update my ipad went into recovery. I did the recommended erase and download from itunes.
Download finished, after 20 minutes no change. Do I need to shut off the ipad and restart?RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
IPad went into recovery mode by itself during/after ios7 update. help please.
My ipad went into recovery mode during or after the ios7 update. i forgot to back up my files and now i need the notes from it. i am unsure if they are syncd to my gmail but i am not syncd to icloud. is there anyway to get my files back?
i have tried using all sorts of programs like redsn0w and tinyumbrella to try and kick it out of recovery mode. But every time i try and get out it just loops back to the itunes and cable logo. is there anyway i can get out without restoring and or losing the files inside the ipad. or is there a way to access the files while in recovery mode. thanks in advance or the help.I have experienced a similar error with the iPhone 4S. The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening. Suffice it to say I am not amused. Apple needs to work this out - I had trouble updating to 8.0.2 as well.
-
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
my ipod touch is disabled for 22 million minutes and I want to fix it but I dont want to lose my pictures and everything else. Help please I dont remember the last time I updated it. Idk I think its been a year in an half since I known about it being disabled. What do I do? Im scared to restore it because I dont want to lose my stuff.
You have to restore and thus erase your iPod. that is how it works.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Photos
- If they are in an iPod backup then restore from that backup. See the restore topic of:
iOS: How to back up
- If they are in the iTunes backup then get them from the backup by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
Need help bad. Installed new HD and I dont want to lose my music on ipod
Can someone please help I had a HD crash and had to install a new HD. but when I plug my ipod into my computer it is telling me I have to reformat. I have allot of songs I purchsed and I dont want to lose them.
Is there a way to transfer playlists and songs with out formatting?
Please help
Thank youCheck out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
There is also CopyPod. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer. -
i have two iphone wich are protected by two different password ! but when i woke up today ! i'v found that my two iphone ( iphone 5 et iphone 4 ) refuse my passwords of 4 numbers i have important data and i dont want to lose please help me ! thank you !
If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, or you don't have a backup, you will have to force it into recovery mode & restore as a new device.
See this for more info... http://support.apple.com/kb/HT1212 -
I tried to download tI tried to download iOS 7.0.4 and have been stuck on a screen with iTunes logo and up arrow and a picture of charger plug. It has been this way for 2 hours. Help??
doreen329 wrote:
... have been stuck on a screen with iTunes logo and up arrow and a picture of charger plug. .
Your Device is in Recovery Mode and needs to be connected to the Computer you Usually Sync with.
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Ipod 5th gen went into recovery mode after I tried to update
I went to update my ipod touch 5th generation to ios 7.1.2 and i went upstairs and left it alone for a few hours, it said the update was verifying when i left it. when i came back it had the screen that told me to connect to itunes so i connected it into my computer and itsaid device was in recovery mode and i have to restore it. i REALLY do not want to restore because i have all of my pictures, apps, music etc
Estou com ESSE MESMO Problema
-
my daughter is trying to download apps on her iphone and it keeps asking for answers to my security questions. the problem is, the questions its asking are not the questions i picked....i do not know the answers. how can i get around this?
I was told that if you reset the password then u can get in and reset the security questions, but I am having problems with it. Apple also has a page on it in there support area, u just have to type it into the search engine and it gives u a list a messages about security questions and support pages.
-
I currently have Mavericks but my original OS X disk that I have I'm pretty sure is Mac OS X 10.6.6. I'm not great with computers but am usually able to fix problems I have had with mine in the past. I have reinstalled and reset my computer to factory settings before, but I am locked out of my computer completely & can't get to my files to save them & I really dont want to lose them. I was in Safari earlier opening a file, the page started to not respond & froze up my whole desktop so I did a hard shutdown & restarted my computer. I haven't been able to get back into my account ever since. If my only choice is to lose my files & reinstall everything, I need detailed instructions because I actually attempted to do this at first, out of desperation to fix my computer & the installer was asking me to select what disk I wanted to reinstall lion to yet I dont have a disk for that nor do I know what it exactly is asking of me? Please help
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
How to backup ipad??i forgot passcode...i dont want to lose my picture
plsss help me
Too late to backup; you'll be backing up the passcode you cannot remember.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097 -
Iphone 4 is stuck in recovery and i dont want to lose photos
my iphone is stuck in recovery and I dont want to do the restore on itunes. I dont want to lose my photos. What can I do.
You will need to restore your phone, just do the restore from your backup in itunes, assuming you have backed up your phone recently, and had your photos synced.
-
I have deleted some photos from camera roll which are taken by today but my icloud is bacuped on yesterday night.how can i get those photos.please anyone tell me because they are very important
Are those photos on PhotoStream?
-
Ipad went into recovery mode during ios8 update , how do i sort it?
My hubby ( god rest his soul!!) has just updated my ipad to ios8 but it immediately sent it into recovery mode , how do i resolve this?
Connect the iPad to your computer by its cable, and your computer's iTunes should recognise that an iPad in recovery mode has been connected to it and let you reset it back to factory defaults - you can then restore to your last backup, or just resync your content to it.
Maybe you are looking for
-
Assessment Cycle - Posting affected in GL Account
Hi, The users have created the assessment cycle, specifying the Sender and Receiver Cost Centers and the fixed percentages. After executing the assessment cycle, it is noted that one of the GL Accounts is getting impacted with the running of the asse
-
How can I change the device name of my iphone? I have the original iphone.
-
I cannot see videos in You Tube 'No Plug In' tried downloading latest version of Flash but situation has not been resolved ? How can I tell if Flash has even downloaded correctly? Any good advice out there -- please :-)
-
Power Key+S no longer sleeps computer (shutdown instead)
Hello, I'm noticing something a little strange recently. When I hit the keyboard Power Key and the window comes up, pressing the S key will now shutdown the computer. For years I've used the to sleep my computer, and now it's not working. Any ideas o
-
Obligatory node 'E1OILKV' missing, Not getting'12'Status fromR/3 to XI Port
Hi, I am sending the Customer Master Data from R/3 to XI. I enhanced the Idoctype OILDEB06 to ZOILDEB06. I am getting the message code status as 03. "Data sent to the Port". But if i execute the the Report RBDMOIND. It is not moving to status 12. "De