My ipad wifi connection cuts out I have a airport express

My ipad wifi connection cuts out I have a airport express I tried to reset wifi and it still cuts out

Try resetting the iPad (hold the home and power keys down until the Apple logo appears).
Barry

Similar Messages

  • Wifi connection cuts out intermittently after updating to 6.1.3

    Since I updated to iOS 6.1.3, my iPad 2 is still connected to my wifi network, but it does not stay connected.  Every 4-6 seconds it will disconnect and then reconnect, often resulting in video playback stopping, gameplay interruption, and web page crashing.  I have read about the problems and answers to the iOS 6 wifi connection problems and none of them seem to be the same.  Those mostly deal with not being able to connect to wifi at all.
    I have tried a hard restart of my iPad and I have renewed the lease for the network on my iPad.  I also set the proxy to automatic.  I don't think this is an issue with my router to the point where I need to do anything to it, as there are several other devices connecting that are functioning properly.  Any suggestions to solve this annoying problem are appreciated.

    Hi deepthisrinivas,
    Thanks for visiting Apple Support Communities.
    See this article for some helpful tips for troubleshooting your Wi-Fi connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Best,
    Jeremy

  • ITunes Cuts Out Periodically When Using Airport Express

    I have a new Airport Express (with current software) hooked up to my Bose Home Theater system. I am streaming iTunes the Stereo but it periodically cuts out. Apple Help had me reset my Extreme and 2x Expresses to Channel 6. Still cuts out periodically, but much less than before. Anyone else seen this and can offer what to do?
    Thanks,

    i just bought a brand new airport express from apple and hooked it up to my brand new speakers. it also started periodically cutting out. so i followed apple's advice and tried different channels on my router. i went from 1 to 11 and still had the same problem.
    then i tried decreasing my security down to WEP 40-bit. still had the same problem.
    then i tried moving the airport to the middle of the room, about 6 feet away from both router and macbook pro. still the same problem. btw - i was using an optical cable from airport to speakers.
    then i removed all security from my belkin router - and it worked. in the end i sent it back to apple for a refund. there's no way i can have my router running without security.

  • The wifi reception on my 3rd gen iPad is very poor. I have an airport express and unless I am right next to it the connection drops. Is there is software update to fix this?

    The wifi reception on my 3rd gen iPad is terrible. I have an original iPad and iPad2, works fine with them. Is there is a software update to fix this?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • What's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

    what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

    Hey aries35,
    I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
    Perform the following steps:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
    via: iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Cheers,
    Delgadoh

  • My wifi keeps cutting out on my 1st gen iPad since I updated to iOS 5.0... It's never done this before, any suggestions?

    My wifi keeps cutting out on my 1st gen iPad since I updated to iOS 5.0... It's never done this before. The wifi is working fine on my other devices. Not really sure what to do.

    Maybe
    SOLUTION: circle with red square Some Music Won't Play After...: Apple Support Communities

  • Wifi keeps cutting out after updating to 5.1

    Hey everyone, just wanted to ask if this was a common problem.
    I updated to iOS 5.1 the day it got released and quickly realised that my wifi kept cutting out, usually after I had locked the phone and started using it again. I didn't think much of it but it kept happening. Most commonly, I would go to work, use the 3g then when coming home it would connect automatically to the wifi and it would show that its connected but wouldn't load any pages. A week or so later, my lock button decided to cave in so I was given a new iPhone by the apple store but the problem still exists. My wifi works fine on my macbook and the 3-4 other laptops we have around the house, its just my iPhone it seem. The problem is still going on now.
    Basically my iPhone shows that its connected to wifi but if I go to safari to browse, it doesnt load anything. The only way I can fix it is by going to settings and turning wifi on then off and this usually works for around 10 minutes before it happens again.
    Any suggestions? I have the iPhone 4S. Ive tried 'forgetting the network' and re-entering my password for the wifi, tried a hard turn on and off, of the iphone. Any other suggestions and is anyone else having this problem?
    Thanks alot, its driving me crazy

    I had this issue. The only fix was to get a new sim (for $25 from Optus - thanks Optus). Worryingly, the no sim message reappeared briefly last night, but disappeared after power on/off
    Probably not a coincidence - my iPad 3g microsim (also from Optus) has stopped working too after the upgrade. It did work initially, but now give a "No cellular data" message. Optus can't find a problem with it. So it looks like I need to replace that too.

  • IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

    I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
    I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
    I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
    So this is my problem for people who don't want to read the whole message:
    1. I can't connect to the internet with the iPad
    2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
    3. It's not the router problem.
    4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
    5. Do any of you know what this problem is? Or do you have a solution?
    Thank you for reading this and have a great day

    Since you are in a hotel, some of these are not applicable.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Are there any known issues with iPad wifi connections to Comcast routers

    I consistently get the "unable to join network " error when trying to connect to my Comcast all in one router.  My other laptops and smartphones connect without issue.  I'm using 32GB iPad2 with wi-fi + 3G.  Coincidentally I switched to comast at the same time I did the 5.1.1 update.  Prior to the switch i had a fios router and 5.0 OS version. I've tried resetting the network info on the iPad and I've reset the router as well.  I can see the network just cant connect to it. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Wifi Connection drops but still have all bars. Please Apple, respond us

    I have a macbook pro 13''(purchased 1 month), a white macbook (bought in 2007) and a dell vostro 1310 (with windows 7) using the same router WRT54G2 Linksys or D-link 524
    Only on my macbook pro 13''my connection drops without explanation and without a certain period (15 minutes, 1 hour, 2 hours).
    I'm with latest updates (both macbook as a router), already formatted and applied the 10.6.4 combo. I have already put ip manually turned off DHCP, DNS already placed manually, I swapped the channel router. Everything recommended in official forums, but nothing helped.
    What makes me saddest is that Apple does not respond. Even with so many threads about this problem.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • What do you do if your wifi keeps cutting out on your iphone but it works on everyone elses?

    My wifi keeps cutting out on my phone but not anyone else's phone! What do I do?? HELP!

    Standard steps from the manual are to restart, reset, restore and restore as new if necessary.  Which steps have you done?

  • Airport Express and iMac connection cuts out all the time

    I have an Airport Express set to 802.11n with b and g compatibility. It is connected to a DSL modem with a static IP address via an Ethernet cable. I use a MacBook Air in the same room as the AE. In another room, I have a 24" iMac (Intel). The iMac is always connected to the AE network as is the MBA. Everytime I make a connection to the iMac (via Screen Sharing or other), the connection cuts out after awhile. There is no interference with the iMac connection, the AE is using a channel no one else around me is using, it just suddenly stops receiving any packets from the AE. I have to open Safari, wait for a website not to load, click on the Network Diagnostic button, go through the reconnection process to the AE network and then it comes back and tells me all is OK. The energy saver is set so the computer never falls to sleep and it is not related to the screen saver coming on.
    It just stops sending data to the iMac. All firmware and software are up to date. I have the same problem when using Back to My Mac outside the home. Sometimes I can connect and sometimes I can't.
    Can anyone help?

    Hi, Thanks for the suggestions. Here are the answers to your questions:
    Channel selection is on Automatic. I have tried switching channels on both my DSL router (and it doesn't go to the channel I select!) and on the AE. Performance is the same.
    iMac still drops connection even if MBA is not logged onto the network.
    Screen Sharing's performance is poor, even if iMac is receiving other internet data (Safari or iTunes downloads)
    MBA always has a good connection
    Each machine is using 10.5.5. This problem exists only in the last couple of months when my DSL provider (all Linux) changed some of their configurations.
    I will try to do the terminal exercise today. So far this am and last night, no dropped connections. Go figure!

  • I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out. Is there another way to fix this problem? Cheers

    I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out so this is not an option. Is there another way to fix this problem? Cheers

    The only way is to connect the iPod to a computer with has an internet connection and iTunes and restore the iPod. Use as friiend's computer or make an appointment at ther Geniuds Bar of an Apple store.

  • Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit.  I have the iPhoto app but pictures not being seen on iPad.  So incredibly frustrating.  Apple please fix this.

    Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit.  I have the iPhoto app but pictures not being seen on iPad.  So incredibly frustrating.  Apple please fix this.

    Do you have a smaller capacity micro SD card to try? I seem to remember from past posts that users were having problems with cards larger than 32GB, however, Apple's page doesn't mention this.
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
    What format are the pics - jpg or raw?
     Cheers, Tom

  • I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
    Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
    Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

Maybe you are looking for

  • How to upload pdf file from windows cell phone?

    How to upload pdf file from windows cell phone?

  • RX9800 128MB, weird artifacting...

    First off here's my system specs: Antec TruePower 430 Power Supply MSI RX9800 128MB Asus P4PE Motherboard w/ 2.53 P4 ATI Catalyst 4.8 Drivers Nothing is overclocked... I just got this MSI 9800 Pro a few days ago and everything works fine except at ce

  • Help with tic tac toe

    hey all, i am having problems creating a tic tac toe program. the program should create a board with NxN spaces, where N is obtained through user input. I created a fully working program that does a 3x3 board, checks for diagonal, vertical, horizonta

  • Google maps for Nokia 5800 XpressMusic

    Hi all, I recently downloaded Google Maps on my Nokia 5800 XpressMusic. However, when I start the application on my phone, the connections fails to connect to the server. Has anyone faced this problem, or does anyone of you have any solution to this?

  • Stellite L40-14B Fail after BIOS Update 5.40-WIN

    after I run .bat file from archive ( steb by step as in instruction) it says "plise wait" , but nothing happened. I'm wait about 5 minute and restart manualy and enter in BIOS version was 5.40. After it i turn off notebook and it not turning on. What