My ipad will connect to the router but will not connect to my network. I have two PC's both will connect to the network. Last night I connected my ipad as a remote for my Apple TV, after that i could not connect to the internet, don't know it that caused
My
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Cheers, Tom
Similar Messages
-
Cannot connect remotely, setup is correct but did not try port mapping, i don,t know how please help
could someone please point me to the possible areas on my server where i can check why i cannot connect remotely. I have been trying for the past two months without success. i did not tru port mapping cause I don;t know how to do this and I was told that port mapping on my time machine is done automatically. I am running a mac mini lio server 10.7.3 Time capsule.
Most people are going to see that message as a result of not properly closing Firefox, and then attempting to reopen Firefox. This problem is most likely to occur on Windows Operating systems, less frequently on Linux and Mac systems but not unheard of on any system.
Because you are on a Mac, I am referring you directly to an article that has been reworded for each operating system.
: http://kb.mozillazine.org/Kill_application
To properly close Firefox on your Mac use "Firefox" button -> Quit Firefox, and not with the "X" in corner of window which simply closes the window and not necessarily Firefox.
When you get stuck as you have described you must Force Firefox to terminate as described at the end of the article:
Mac OS X
:Open Apple Menu and select "Force Quit". For Mac OS X 10.3 and later, you can also use the Activity Monitor found in your "Utilities" folder (Applications -> Utilities -> Activity Monitor).
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
WRE54G is already connected to WRT160N Router, but can not get access to internet?
Hello,,,
I have seven of rung expanders WRE54G and all settings i set as this link
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4104&p_created=11611...
* same wireless SSID name
* same Channle ( What is the difference between the channel number 6 & number 11 for example?)
* security ( i used WPA2 mixed, that is not in WRE54G, so what i should use)
* Each Expander has own IP address as 192.168.1.2 up to 192.168.1.8
Is the gateway mean the main IP of router 192.168.1.1 ?
all those expanders connected with WRT160N ( the Link gets Blue light)
but my laptop can not get the IP address near of any of those expanders, to get the access to the internet!!!!
What is the reason please?
Message Edited by Almowdmer on 11-10-2008 12:42 AMI am very happy to communicate with you ( I sure i can learn some thing from you my brother )
Your words are true seven the number of expanders is not easy option
or the cause of the success of the wireless network coverage May succeed strengthened,
with one or two, but more than that needs to be a better distributor.
I think I will use RangePlus WRT110 as repeater in some floor where the wireless signal
is not can work, after connecting through the wire with the main router,
and then I can get half the reference from the repeater when i useing the WRE54G expander
What do you think?!!
I put on my experience on this link
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread.id=115808
Message Edited by Almowdmer on 11-16-2008 10:21 PM -
How do I use my iPhone as a remote for my apple tv
I am trying to use my iPhone or iPad as a remote for my Apple TV, but on my TV screen the "add remote" option is grey and cannot be selected. Any suggestions? Thanks, Cliff
Welcome to the Apple Community.
If you have already turned on home sharing on the Apple TV, then the Apple TV should simply show up in the remote app without you having to do anything else.
Unfortunately, if you haven't yet enabled home sharing, you can only do so with the original remote and you'll need to purchase a replacement from the Apple Store. -
I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!
Apple's response to my email:
"I understand that you can't update your apps using your iPad.
Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.
Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Have a great day!" -
Hi,
I have recently installed iTunes latest version (10.5.1.42) on Win XP SP3.
The problem is, when accessing iTunes, It connects to the internet, I can sign in (It shows my username in sign in bar), But nothing is shown in the iTunes store window in iTunes. It shows "accessing iTunes store..." for few seconds and after that its blank with an apple logo inside the status bar.
ANU SUGGESSION???Sorry, no. The screen image you see is specifically saying you need to connect it to a computer. You could take it to an Apple retailer for help.
-
It downloaded fine, but when I attempt to install it won't verify, saying that I am not connected to the internet when I know that I am! Tried on several wifi connections while plugged into power source. Any advice is appreciated!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? There is no firewall inbetween the two connections, as this is all on our internal network.
Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
Thanks.If anyone ever comes across this and has the same issue, here's what I did to fix it:
My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only". (I would've used N but one of the NICs in my house is too old to support it.) Anyway, after making this change, Facetime works fine on the phone. Hope this helps someone else! -
I've bought a new remote for my apple TV and now I can't access the menu
I just bought a new remote for my Apple TV since I lost the original one. Now I cannot access the menu as all I get is the standard "screen saver". Even then, sometimes it won't even turn on, so I have to unplug it and wait two minutes and then plug it back in. Regardless if I do that or not...........the best I ever get is the screen saver.
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times what else can I try to fix it?
Have you tried unpairing the remote? You do this by pointing your remote at the Apple TV and holding the MENU and Left buttons down together for 6 seconds.
-
Hello, my name is Karan Taneja and i have been a loyal Apple customer.
I have been using Apple since it introduced iphone 4 and have been upgrading/buying every new phone Apple introduces after that.
I was always happy and surprized to see Apple doing so good to its customers.
Unfortunately, i experienced some thing really unprofessional and different this time.
It begun suddenly one day when i tried to charge my phone, the phone was on silent mode and as usual the phone vibrated when i kept it for charge.
After a few seconds the phone vibrated twice or thrice again when i re-inserted the cable thinking it might be loose.
It continued to charge well when i left the room for 2 hours and finally when i returned i could see a damaged i phone 5
lying on the floor and the phone vibrating continuously and i figured out there was a fault with the cable and the
current wasnt flowing continuously due to which the phone continued to vibrate and fell off the shelf.
Next day i took the iphone to Apple service centre at Saket which was closed.
Thinking its August 15 and so the store might be closed i went back to home and waited for the next day but unfortunately could not turn up since
i had to go to work on odd timings.
I again went to the same service centre on 17th August 2013 and saw the service centre closed again when i tried to contact
the other service centre and was informed about Saket's service centre already been shut down.
There was no hoarding/ banner any kind of intimation for the customers.
Since 18th August was Sunday and i was occupied on 19th August i went to service centre at Ansal Plaza Khel Gaon Marg on
20th August 2013 to complaint about the Faulty Cable and the damaged caused to my iphone 5 due to the same.
I very well explained the same to one of the person at the receiving desk at the service centre who accepted the cable
but explained me that he doesnt have the authority to accept my iphone without permission from the technical support people
who will be able to help me in that case and gave me the toll free number.
i Tried to reach the toll free number and finally managed to get online with a technical support executives who too all my details and
summary of the problem i experienced and finally kept me on hold for almost 10 minutes ormore after which he said he said that my
case cannot be considered and while the discussion was on, the call was disconnected and i was left frustrated as i still was at the service centre
but finally i left with no hope from Apple .
I tried to reach again at the toll free number, and finally managed to talk to a well behaved person who assured me of considering my case and suggested
me to go back to the service centre and advice the the person at the recieving end there to get me connected to the technical support team when i reach so that i could
submit my phone but, since, it was already around 4:30 and the service centre was about to shut and due to traffic
conditions all around i thought of visiting the service centre next day.
On 21st August 2013, i went back to the service centre and spoke to the one of the store person who adviced the case to the manager Mr. Alok ( as i remember )
who was really rude to tell me that i will have to call the technical support team on my own and then he will connect and that its not his work and all that .
I finally connected to one of the senior technical support executives Mr.Mohamed Azharuddin K who understood my concern and spoke to the manager of the store to accept
my iphone.
My iphone was finally collected and i was assured i would get a call back next day from the service centre about the update.
It was now 22nd August 2013, no update was given,no call was received, i tried to call the service centre at 12:30, they were unaware about my case and knew only about the cable and said will call me
back very shortly.
I called back at 2:30, still no update, at 4:30 i called back again when i was told that my case cannot be considered and i can collect my phone.
Similar discussion was held with Mr.Mohamed Azharuddin K.
I knew by the time i will reach the service centre would again close.
He told me that my case cannot be considered since the cable was recieved in the dead condition and wasnt working at all unlike what i told him about the cable.
On 23th August 2013, i went back to the service centre and collected my phone. When i asked about my old cable and told them that it was working and i wanted the technician
to check it properly when i handed it over, they had no answer but to say its already shipped. I spoke to the manager who said that he never told any body that the cable
was received in dead condition and he only conveyed to other authorities that the cable had fault .
I finally dont know what to do and came back with the new cable.
I just visited my time, petrol and parking charges in getting the cable replaced.
If i calculated i have spent around 16 hours and 2000 worth of money in just getting the cable replaced and have a broken phone in hand.
More than a weeks torture.
Is that the way apple compensates for its fault ????????????????
I will make sure that i never buy any thing from Apple and advice all the people i know to not trust Apple blindly.Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible
Is there a reason you can't connect your iPhone to the same Wi-Fi network as your iPad?
-
IPhone 5s can connect to wireless WIFI router but can not access internet.
iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
TIA
RichYou IT person should be able to sort this out. But, they seems to be too busy or disinterested to do this. Suggest you provide the it person with an iPhone to get interested.
Any could be lots of things.
The best you can do is to get access to the admin setup for networking on a pc? The internet settings are all the same. Only what names the manufactures change from OS to OS. Check and compare parameters.
Phone works to internet at home, I assume? -
How can i get a replacement remote for my apple tv
how can i get a replacement remote for my apple tv?
Welcome to the Apple Community.
You can purchase them from the on-line or bricks and mortar Apple Store.
Maybe you are looking for
-
How to get attribute values from one view to another
HI all, Thx in Advance.. I have 2 view like v1,v2.In v1 i used one attribute values from "get single attribute" method.And i need the same values in v2 screen.For this i did in v1 outbound plugs , i mentioned the parameter name . How can i get the sa
-
I am using 2011 SP1 version of LabVIEW, toolkits and add-ons. I am trying to make the following remote panel opening VI work. This used to work well on LabVIEW 8.5 but now I get an Error 7 from the last Invoke Node of the second loop. The top loop wo
-
I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air because there is no more storage space available. I want to make sure all my photos are not lost and that they do not return to the original devices because of the
-
hi guyz, may i know how to get a subtotal n grand total in a report , how can i get data right below the field names, whats the command to get vertical line. plz advise thanks a lot sudheer Message was edited by: sudheer sun
-
We are intermittently encountering an issue with the load generated by the UWL service. The Portal is flooding the backend (ECC) with RFCs calling SAP_WAPI_GET_HEADER and SAP_WAPI_GET_OBJECTS. We go from a couple of million RFCs a day up to 15 millio