My iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?

my iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?
Thanks

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

TS1398 Since I upgraded to iOS 7.0.2 my phone will not auto-connect to the home WiFi network.

I upgraded my iPhone 4S to iOS 7.0.2 and now my phone will not auto-connect to the home wifi network. Each time I leave and return to within range of the network I have to remember to manually connect, otherwise it continues to use 4G for data. The credentials are saved (all I have to do is tap it to connect) but just won't happen automatically any more.
Is anyone else seeing this problem?

Tried the reset multiple times. No go. Before the IOS 7.0,2 update my devices were connecting to home WIFI eventually.

TS1398 iPad will not automatically connect to home WiFi, I have to do it manually each time.

My iPad will not automatically connect to my home wifi and I have to manually connect each time. Is there something I can do to correct this?

Update the firmware in your WiFi router. Look for an update on the manufacturer's support Web page.
If you need more help please give the make, model, and version of your WiFi router.

My ipad will not stay connect to the internet?

My ipad will not stay connect to thier internet. I have to turn ipad off and back on then it will connect for a short time them I have to turn it off and back on to reconnect?

1. Turn router off for 30 seconds and on again, this will refresh the IP address of your iPad
2. Reset network settings: Settings>General>Reset>Reset Network Settings
3. Try adding your SSID and Password manually
Settings>Wi-Fi>Other...>Other Network

Turbo will not AUTO CONNECT to my car's blue tooth.

Turbo will not AUTO CONNECT to my car's blue tooth. I have to manually do it each time I get in my car. HOW DO I AUTO CONNECT IT?!
thanks

No, Hyundai Veloster.
Funny, cause I did see the forum on a subaru.
It's connecting... I just have to do it every time I get in my car. I had no problem with the razor connecting automatically.

PC will not automatically connect to wireless network on startup...

Hi all - I have a WRTG54 wirless router with the latest firmware. Windows XP Home SP2. I have a mixed network with two wired PCs and one wireless. The wireless PC will not automatically connect to the network. To connect to the network i have to go to the wireless network properties box and check "let windows automatically configure network" Once I do this the wirelss PC connects with no problem. Unfortunatley, whenever i turn the PC off and turn it back on the "let windows automatically configure network" is unchecked and i have to go through the process of checking it again. I uninstalled the wireless adapter and reinstalled the drivers only and then ran the windows wireless setup wizard but the problem persists. Any help on this would be much appreciated.!!!! Thanks!!

First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Do not let "Windows automatically configure your network". Instead do the following:
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. It should connect automatically. If you still have trouble, in the computer, temporarily disable your software firewall, including Windows Firewall, and see if that helps.
Some users have reported improved wireless connections by switching to WPA ( = WPA with TKIP) encryption.

HT1222 Since I downloaded my update my iPad will not stay connected to the wifi. Why? & how can I fix it?

SInce I downloaded the new iOS6 update on my ipad2, it will not stay connected to my wifi. Does anyone know why or how to fix it?

Hm, posting on this forum didn't fix it for me.

Under Yosemite iMac will not stay connected to ethernet network

Mac OS X 10.10.1
When attached to Netgear Prosafe gigabit unmanaged switch (circa 2007) iMac Retina, Mac Pro, Macbook Pro will not stay connected to Apple Airport managed ethernet LAN. With Sys Prefs Network panel open I can watch the ethernet connect and disconnect on a periodic basis (about every 15 secs!). When same machines are connected to ethernet ports on the Airport itself, connections are steady and permanent. I suspect incompatibility with networking protocol used by Netgear but assuming their protocol is standard the incompatibility must be in Yosemite. Did NOT have this problem under Mavericks with any of my machines.
Is my only alternative to order a new gigabit switch? If so, have protocols changed in the intervening 6 years such that Yosemite is not compatible with older switches?

Well, my 6 year old netgear gigabit switch must have been partially failing because when I replaced it with the current model (same specs, same model name, but sold as an updated model??) things are now going fine. Getting gigabit network speeds on all computers and 100% reliable connection. Guess it was just a coincidence that my Yosemite update and the switch failure occurred at the same time.

Airport Extreme Card (will not automatically connect to home network)

Running OSX (10.4.7) on a G5 2.0 DualCore. I just had an Airport Extreme Card installed by Apple a week ago. Everything was working fine with WiFi ( I use a Lynksys Router. But oddly now when I cold boot up, the Airport Extreme will not automatically connect to my home network. The little Airport icon on the upper right is always greyed out ( even though clicking on the icon... says that Airport is "On" ). So I now have to manually select my home network everytime I boot up. The first week or so though, I didn't have to do this...it just automtically connected to my home network. I made no changes to the router settings, nor the Network prefs.

I have been able to get my home network running with simultaneous access to the internet with the MacMini and the PB G4 via a WL router (Netgear WGR614v4 with four ethernet ports).
This was the process:
1a) Turned off airport on both computers.
1b) Turned off both compters and
1c) disconnected the router from the cable modem.
a) Disconnected ethernet cable from WL router to Macmini.
2b) Powered down the router for 10 seconds.
3a) Keeping both computers unpowered,repowered router and pressed the reset button (behind an unmarked tiny hole in the back of the router) then re-connected it to cable modem. Waited 30 - 40 seconds until internet service lights flickered green.
3b) Reconnected ethernet cable to MacMini and turned on power for MacMini. No Airport running. With administrator privilege I configured in Syst. Prefs. "Sharing" folder Internet access using "Built in Ethernet" port for computers running "Airport".
4) Turned Airport network on in MacMini and started browser.
Result: Internet connection established.
5a) Powered up PB G4 and then turned Airport on.
5b) In Syst. Prefs. in "Sharing" folder turned Internet Sharing off. But set "Share your connection from Airport" to computers using: Airport with check-mark. (No Built-in Ethernet and no Built-in FireWire!)
5c)Started browser. Result: Internet connection established.
6a) In the Finder window of both computers I clicked on "Go" in toolbar and looked for the name of the other computer, which were listed as alias besides the "Library" and "Servers" aliases. Clicking on the computer alias brought up the 'Networked Globe' and a control button "Connect".
6b) Clicking on "Connect" brought up the mounted drive of the other computer.
Result: Wireless network operational.
PS: I don't dare yet using encryption for the airport network. That's for another day.
Power Book G4, MacMini Mac OS X (10.4.7)

TS3992 my ipad will not back up manually , what do i need to do

i have storage but ipad will not complete the back up

If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

My father's iphone will not boot. We live in Barbados but the phone was bought in the US. Is there any way to fix this, or does he need a new phone, and is this covered by warranty?

My father has owned his iphone for almost exactly 9 months. The phone was purchased in the US when he was on holiday. We live in Barbados, but the phone should still be under warranty. (please correct me if I'm wrong). He says the phone will not boot, it is inconsistent with showing how much battery life it has and it keeps looping because it's always trying to reboot. He treats his electronics very well and the phone is in perfect condition. Is there any way that this can be fixed without him losing all the information on the phone? Or can he get a replacement phone (due to the warranty issue)?

Have you tried any basic troubleshooting
restart
reset
Restore
See user guide
http://manuals.info.apple.com/en_US/iphone_ios5_user_guide.pdf
assuming iPhone is still using iOS 5.0.1

Brand new Ipad not auto connecting on wifi network

I've read the old posts. I've adjusted the brightness and turned off auto brightness. I've changed my dhcp proxy to auto.
Same as everyone else, my macbook, ibook and iphones all connect to the network and access internet with NO PROBLEMS.
The Ipad will join the network, but will not access online content. Always times out.
This just started happening on day 2.
We all know this began back in early April.
I'm running a brand new Buffalo Nfiniti router with updated firmware. Again, every other apple device works just fine.

got this from the stickied FAQ.
iPad stopped auto connecting 5 minutes after non use. Then I tried this and it worked. Guess I have to do this every freaking time I want to use the net.
Renew IP address
In some larger wireless networks it may be necessary to renew your IP address. Renew your IP address using the following steps:
Tap Settings > Wi-Fi
Locate the Wi-Fi network you are currently using and tap
Tap Renew Lease

E61i - will not auto-connect to WLAN for SIP

Although my SIP client is set to "always on," the phone will not connect to a WLAN network. If I go into the SIP profile settings, change it to "as needed," then change it back, the phone will prompt me and connect.
Does everyone else's E61i behave this way? I don't have a sim card in the phone right now... do you think that could be it?
I have my Gizmo Project account set up and have made and received calls successfully, even with my Grandcentral account.
Thanks very much for reading.
Todd
Message Edited by teye on 18-Dec-2007 04:11 PM

No, Hyundai Veloster.
Funny, cause I did see the forum on a subaru.
It's connecting... I just have to do it every time I get in my car. I had no problem with the razor connecting automatically.

Airport Extreme will not auto connect after poewr out with USB Hub!

Hi all,
I have just purchased the Airport Extreme and have it connected to my ADSL router. All works fine but if the airport looses power (as the household power went off momentarily today) then once it powers back up it will not connect to the internet unless I unplug the USB hub connected to it first.
Anyone with similar experiences?

vtwiz wrote:
Hi all,
I have just purchased the Airport Extreme and have it connected to my ADSL router. All works fine but if the airport looses power (as the household power went off momentarily today) then once it powers back up it will not connect to the internet unless I unplug the USB hub connected to it first.
Anyone with similar experiences?
No
Your issue may have something to do with your ADSL router and/or ISP carrier when you have power interruption.
I would contact Apple to take advantage of your free 90 days of tech support by phone since your product is "new." Let them tell you what the problem is.
There are 2 Airport Extreme forums - http://discussions.apple.com/category.jspa?categoryID=140

IPAD WILL NOT JOIN PASSWORD GUARDED WIRELESS NETWORK

My ipad 2 will not join a password guarded Time Warner Cable home wireless network. The network is properly discovered yet I cannot get a password access box to appear. Suggestions please

What encryption is the router using?
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points

My iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?

Similar Messages

Maybe you are looking for