My Ipad will not come on after I charged it.

My ipad will not come on after I charged it.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

  • TS3274 My Ipad will not come on after reset. All i get is the little white apple to appear that is it. Any suggestions ?

    My Ipad will not come on after reset. All i get is the little white apple to appear that is it. Any suggestions ?

    Hi Dawg70,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    Judy

  • HT1338 Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
    also
    Finder icon on dock, macintosh hd,
    Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    delete file & restart sleep to test.

  • My ipad will not come on.  i tried to restore and get error message 1603, dont know how to take out itsw

    my ipad will not come on.  i tried to restore and get error message 1603, dont know how to take out itsw which it tells me to do.

    Error 1603
    Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW  in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    The above is from the 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload and am afraid it 'crashed'

    My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload midway and am afraid it 'crashed'

    Try putting it into recovery mode.
    Connect iPad to your computer via USB while it's turned on.
    Open iTunes
    Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
    Power off the iPad completely (wait for the progress spinner to disappear).
    Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
    After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
    Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
    A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
    Click on the "Restore" button and the process will begin.

  • IPad will not come off of boot screen

    My ipad will not come off the boot screen.  I was able to get it to reset with the new software,  and go through the whole reconfigeration process.  then it just reboots and sits on the screen with the apple on it.  Then it comes to the configuration screen then goes back to the boot screen.  Please help.  I don't know what else to do.

    Try restoring using recovery mode. Read about it here.
    iPad: Unable to update or restore

  • E550 will not come back after hibernation/sleeping mode

    Thinkpad E550 will not come back after hibernation/sleeping mode. please help. I just bought this garbage laptop about 1 month ago. the big issue is the laptop will not come back after sleeping. I often run some calculation for some hours, the laptop always goes sleeping and wont come back. I had to power off the laptop and re-started it again. All of my calculation results  were gone. Lenovo support is very bad, I already submitted a service ticket 2 weeks ago, but nobody contacted me. Lenovo laptops are garbage. I will not buy it anymore. Anyone can help? thanks a lot!

    HI Clare,
    In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
    Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
    With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
    Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
    regards,

  • HT4623 My iPad will not come on. When I updated it, I did not plug it into the outlet. What do I need to do?

    My iPad will not come on. When I updated the settings, I did not plug it into the outlet. What do I need to do to get it to come on?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT201412 My ipad will not come on, but I do not have a manual, which is the home button and the sleep button to perform the reset as described above?

    My ipad will not come on, I do  not have a manual.  Recommendations have been to reboot/reset it by holding down the home button and the sleep button.  I do not know which button is which. Can someone please describe to me which two buttons to hold down?

    Reset
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider
    Home button
    http://i1224.photobucket.com/albums/ee374/Diavonex/522812e64948b65ef3f55ab87341a 51b.jpg
    Sleep/Wake button
    http://i1224.photobucket.com/albums/ee374/Diavonex/2760061b69712de27333baaf3e889 2b3.jpg

  • My iPad will not come on

    My ipad will not come on even plugged in. HELP!!!!

    did you let the charge run out? 
    If so, then plug it into a main power outlet (not a USB port) and leave it for at least 20 minutes, perhaps longer.  Then try to power up, or if that won't work try a reset:
    Hold both the Home button and the Power button down for about 10 seconds until the Apple logo appears.
    Let go promptly when it appears.
    Wait 30 seconds or so for your iPad to restart.
    No information or settings will be lost.

  • My ipad will not come back on.

    my ipad will not come back on, i have tried restarting it but when it comes on it comes on a black screen with an apple then just stays there. help.

    If a reset doesn't work, try and force iPad into Recovery Mode:
    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My ipad will not turn on and is charged, i have also tried a reset and the screen flashes and then goes black.

    My ipad will not turn on and is charged.  I have also tried to reset my ipad by holding in the off/on button and the home button at the same time , but it did not work.  The screen flickered a couple times and then went black.  Is there anything else I can try?

    Hi,
    Does anything appear on the screen at all, e.g: Apple Logo etc?
    You may also find the information here useful: iOS: Not responding or does not turn on
    Regards,
    Steve

  • My iPad is showing me a cord and it is pointing to itune . The iPad will not come on or do anything.

    My iPad is showing me a cord and it points to a the iTunes. It will not come on. Can anyone help me

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT1386 i update my phone to is06.01 and my music will not come back after i svnc

    i have update my iphone 4s to is06.0.1 and after i sync my music will not come back has any one had this problem

    Is the music in the iTunes library on your computer?

  • IMac screen will not come on after sleep

    iMac screen does not come on after sleeping for a period of time - twice now from overnight. The back seems to be warm. I have to hold the on button until I hear the drive and system shut down.  Then after period of time it will start just fine.  ?????

    I know that some of the older imacs had overheating problems that caused unexpected sleep.  try to keep the display darker and keep the room not too hot.  That seems to usually solve the issue.

Maybe you are looking for

  • Installing iTunes on Windows 64 bit XP

    Where can I find the installation file for iTunes, that can be installed on Window XP, 64-bit?  The file I downloaded from itune.apple.com gives me an error stating "This iTunes installer requites Windows Vista 64-bit edition."

  • How to make visible context menu for nodes of the given level of treeTable?

    Hello I'm using JDeveloper 11g 10.1.1.4 I have a TreeTable component with 4 different levels (Contry-Branch-Town-Object). I need to show custom elements of the context menu (right click of the muse) only for rows with "Object". Now, I'm doing it with

  • Error doc base for DRM

    Hi, Can someone share with me some document that will have all error codes with solution as I am new to DRM and we are facing lot of issues. Thanks.

  • How do I remove a Description on a replicat?  It shows up in 'ggsci, info all' and i want to remove it.

    how do i remove a description on a replicat?  It shows up in 'ggsci, info all' and i want to remove it.  It looks like this: REPLICAT    STOPPED     namexxx    00:00:00    00:00:04 Description "(null)" I tried this: GGSCI (qlxdodsr001.qaapollogrp.edu

  • Oracle to SQL 2012 migrataion

    Hi, I am planning to migrate Oracle 11g to SQL Server 2012. I want to estimate the Sizing requirement based upon actual usage. please let me know how I can get usage data from Oracle which I can use to size SQL Server Servers. Thanks Ashu