My ipad will not turn on when I plug it up, the screen light will occasionally blink
my ipad will not turn on when I plug it up, the screen light will occasionally blink, thank you
First, make sure that it's fully charged.
Then, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Similar Messages
-
My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
My iPhone4 will not come on. When i plug it into the charger, it only says connect to iTunes. When I tried restoring it, it said my iPhone4 could not be restored.
Try this
http://support.apple.com/kb/HT1808 -
I have only had my iphone for about six weeks, and today it just died. Nothing happened to it, but I went to call someone and the screen was black, now it won't turn on or charge!????
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue. -
Ipad will not turn on when you slide to unlock
ipad will not turn on when you slide to unlock
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
-
my ipad air is not turning on, when I plug it in it doesn't even show that is charging and I tried several chargers they all work fine, its just when off and pitch black help!!!
If the battery is very low, it can take 15 minutes or maybe even longer befor you will see any response at all on the screen. If you have let the iPad charge for what you think is a sufficient length of time and it still hasn't shown any signs of life, try a reset and see if that will force it to start up.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo apperas on the screen and then let go of the buttons. If that still doesn't work, try charging the device again overnight. If it's still dean in the morning, try restoring the device with iTunes.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that doesn't work, make an appointment at an Apple Store and seek their guidance. -
my iPod will not turn on when I charge it or restart it it just gets stuck on the apple icon screen what do I do to fix it
Hello crimsonflare,
Try this first:
Apple - Support - iPod Troubleshooting Assistant
If that does not work, use this:
Putting iPod into Disk Mode
and try to restore you ipod.
Hope this helps.
~Julian -
Help me please i have ipad 3 its screen goes blank white again & again ... last night i try to restart my ipad but after that my ipad is not turning on, when i put it on charge there beep coming again & again..
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I have an iPhone 4 and it will not turn on. I plug in and says connect to iTunes. I connect it and it won't restore. What can I do? Please help
http://support.apple.com/kb/TS3694#error21
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit. -
My iPod shuffle will not turn on, nor is it recognized by the computer to pull up iTunes. I have order new USB cords and nothing. Please help! Not sure of the generation of iPod shuffle, I think 3rd.
first: why did you download the iOS Beta 8? If you are a developer, go to the Apple Developers website and check what they can do for your case.
second: setup an appointment to a Genius Bar for service. -
My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings
Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport -
I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing
Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.
-
I tunes will not open, and when i can open it my iphone 4 will not connect
i tunes will not open, and when i can open it my iphone 4 will not connect
I Hold down the Shift and Control keys while opening iTunes, it gave me the same Error Message: iTunes cannot run because some of its required files are missing. Please reinstall iTunes.
I have done all the possibles such as Disable the Bonjor, nope
I have install the version before this version and it keeps telling me that I have new version installed.
I have done so many installs and I believe all my past beack up is gone, and I am worried..., my nearly 800 Contacts and my new Photos that I took while I am on my business trip... (I send it by email through my iPhone 4) but Contacts is what I am worried.
Apple Employees... Please HELP!
What is going on with your software????????? -
My iphone 3gs will not turn on. I plug it in to the wall and still get nothing...I plug into my computer and itunes nor my computer recognizes it, any ideas?
Could be a problem with the 30-pin connector port or the cable. Is there an Apple Store or Apple authorized support center nearby?
Maybe you are looking for
-
How do you recover a book from iPhoto after it crashed
After working on a book every night for 6 months iPhoto suddenly told me today that the theme was no longer available and to change to another and the pictures would transfer and I could continue. I duplicated the book then did as instructed. Both bo
-
Hello. to start with im not really up on the ins and outs of ff, ive used it for a while but not really tinkered with till this problem Im running Vista (no comments on that please :p) and the latest version of as downloaded from the mozilla website
-
hi all, I got an error while posting Inventory at plant level. error: parameters for plant is not maintain for inventory management. Field VM07M-ANZGEB. does not exist in the screen SAPMM07M 0410 Field VM07M-GEBEH. does not exist in the screen
-
Problem after creating a module !!!
Hi Experts, I was trying to put my hands on EJB development and took the help of the paper "Step by step guide to develop a module for reading file name in a sender file adapter" by Krishnakumar Ramamoorthy. Now that everything was developed and depl
-
I got email from Skype that say that they can't ad...
I got email from Skype that say that they can't add $10 I can't find the way to update my account