My iPad will not update. It has said "waiting" for days
My iPad will not update. each time it says "waiting" and is installing or updating for days
Are you trying to update the iOS or install app updates?
Have you tried turning the iPad Off and then back On?
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom
Similar Messages
-
My iPad will not update apps. It states it is installing but if never completes the installation this has been going on for more than 24 hours. What do I need to do?
Try a reset:
1. Hold the Sleep and Home button down (together) for about 10 seconds
2. Until you see the Apple logo (very important) -
My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
My Ipad will not boot up, has a think logo running all the time...any ideas. Also had trouble upgrading to ios.6 the computer is not the original one I synved my ipas too. It started OK then failed. Now it will not connect at all to computer...comes up with an error.!!!
Try DFU Mode Restore. Open iTunes on computer, connect iPhone to computer. Hold both Home and Power buttons for exactly 10 seconds, release Power button, keep holding Home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds time. Restore iPhone Firmware.
-
HT201413 my iPad will not update error 9 keeps coming up
My Ipad will not update, error 9
Hello Nicky Mifsud,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#9
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Have a nice day,
Mario -
My iPad will not update 2 of apps
My iPad will not update 2 of my apps. It shows the bar on them saying they need to load so I click on them and it says this app can not be uploaded at this time. I'm not sure what the problem is. I have tried to upload them on different types of internet and it will update all my other apps except those two.
Have you tried updating them one at a time? If that doesn't work, then update them in iTunes on the computer you sync with, delete the apps from your device, and then sync the updated ones to it via iTunes.
Cheers,
GB -
my iPad will not update, says not connected to Internet, but I am browsing support online on this same iPad?
Can you update via itunes on computer?
-
My ipad will not update apps or let me buy new apps from the app store it says I must be in the Australian store not the USA store, how do I change stores?
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311 -
My iPad will not update apps. I did try all previous suggestions.
My iPad will not update apps. I did try all the suggestions. When I click on the rapidly growing number of updates, the screen stays blank. Nothing is being downloaded. I have worn out the re-boot function.
This is a problem that many users are experiencing now. Apple is working on a fix.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this, because you cant fix it. It is a workaround only.
you can update your apps in iTunes on your computer and sync the, to the iPad as well. -
IPad will not remember my client card number for online banking since ios7 update
iPad will not remember my client card number for online banking since ios7 update
Generally speaking, your bank would use a cookie to store your card number (bad) or to associate your browser with its list of saved card numbers (less bad). If you have cookies cleared after each session, then you may be blocking this feature.
To check your cookie handling for your bank's site, when you are on the site, right-click the page and choose View Page Info, then Permissions. Under "Set Cookies" most likely the "Use Default" checkbox is checked. The actual setting will appear in gray.
If the actual setting is not Allow, then uncheck "Use Default" and check "Allow." This will take effect the next time you start Firefox or if you clear the site's cookies on the Security tab (View Cookies button) and then revisit the site.
If the actual setting already is Allow, then some other feature (e.g., clearing history when you exit) or program (e.g., a security suite) is clearing the cookie.
This article has more tips on troubleshooting problems with cookies that don't save: [http://support.mozilla.com/en-US/kb/Websites%20say%20cookies%20are%20blocked Websites say cookies are blocked | Troubleshooting | Firefox Help].
Any luck? -
iPad will not update games
You have to do better than that if you want help. Describe what happens when you try to update apps.
-
TS4006 After hitting update , find my iPad will not update on my iPad 1
After hitting update , find my iPad will not update on my iPad 1
Suggestions?Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
During an app update it froze and has said waiting for 2 days and I am unable to open or delete
During an app update it froze and has said waiting for 2 days and I am unable to open or delete. How do I recover my app?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
The last update IOS 7.1 will not update on my ipad nor did the prior to that..That is 2 updates, It goes so far,than it shoes an error has occured.
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
HT6058 HELP My ipad will not update
Will not update. Keep getting retry error message
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. If it does, try updating using iTunes on your computer.
Maybe you are looking for
-
Mouse Clicks' Queue when Button is Disabled
Hi, I was wondering about the Disable property for UI Components. In the docs it says that when the component is disabled it ignores all interaction whatsoever - in particular - user interaction. In my case, the button is disabled for a few seconds r
-
TA26488 My iPod Classic 160GB goes from song to song without playing.
I have an new generation (less than 1 year old) iPod Classic 160 GB that will not play any songs. All the artists and songs appear to be on the hard drive, but will not play. In fact, when you press play or shuffle it just continuously goes on to t
-
Error:Insert flow into I$ table
Hi, While implementing scd2 type,I am getting an error"Insert flow into I$ table" ODI-1228: Task int1 (Integration) fails on the target ORACLE connection twitter. Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression. Please help
-
(Automatic) Refresh of Cached object after insert/update
Hi, (I am using Toplink 9.0.3 against an Oracle Database) I am inserting and updating records in the database through objects registered in a TopLink UnitOfWork. I happen to know that certain database columns will get a (changed) values because of Da
-
I have created a java app and deployed in ToolsAndFramework of endeca and since that app can be accessed through a directl url so want to implement an security filter which will use the same user validation as is used in experience manager.