My ipad won't shoot with filters when in the camera app, what do I do?

"Filters in Camera are available on iPhone 4s or later and iPod touch (5th generation 32GB/64GB)."
https://www.apple.com/ca/ios/features/#camera

Similar Messages

IPad won't display my Gmail contacts in the Contacts app that comes with the IPad.

I have never been able to get my Gmail contacts imported into the Contacts app that comes with the IPad.

If you can be more specific about what you have tried, someone might be able to offer other solutions.
I sync my contacts and calendar with Gmail too. I don't use iCloud for syncing contacts. I have set it up as an exchange account. That works on both my ipad and iphone. Any changes made to either is reflected on the other.
Settings>Mail, Contacts, Calendars>Add new account>Microsoft Exchange. Leave out the domain name. The server when asked is m.google.com. Turn on contacts (and calendar or mail if you use them) and that's it.
If that does not work, perhaps you can describe what issue you are having.

When in the camera app my screen flashes purple and my front camera doesnt work

my front camera doesnt work, my back camera flashes purple when i use it. - what should i do, where should i go to get it looked at and is it a technical default on my phone or has it happened to anybody else?

Ricky Sherwood wrote:
.... - what should i do, ...
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
Try this first...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Old 430EX won't sync with 5Diii when used off camera, if shutter speed is over 200.

I am using a cowboy studio transmitter & receiver. Manuals for the 430 & 5d both indicate highspeed sync will work with higher shutter speed. 430 is set to highspeed sync.

The Cowboy Studios won't allow HSS. I'm not sure what model you're using, but knowing Cowboy Studios I'm guessing it's full manual only. The Yongnuo 622 triggers will allow HSS.
Again, I don't know the specifics of your trigger. But Yongnuo manual triggers (602, 603) will still trigger if you go above max sync speed, you'll just get banding due to the falling shutter.
Keep in mind that HSS significantly reduces the amount of power out of a flash. And since it's effectively a continuous light at that point, the faster the shutter speed the less the flash can contribute to the exposure. I'm not sure what speeds you're using, but if you're up in the 1/1000+ range the power output will be quite small.

My ipad won't charge with the usb cable

I took my Ipad on vacation with only my usb cable, expecting to charge off another computer. No charge! Since then I have tried several other cables, no luck. Is my Ipad problematic?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

HT201318 My Ipad won't let me in when I try and slide to unlock it...the message is Not enough Storage but I can't get in to add more storage...what do I do to increase storage...can I use my computer to do so?

My Ipad won't let me in when I try and slide to unlock it ...the message is Not Enough Storage...but I can't get in to put more storage on it

Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
If you find that it is set to the correct region, log out of your iTunes Store account, restart your iPad, and sign into your account again.
Hope this helps.
Regards.

When I plug my iPad in to sync with my mac desktop, the capacity meter shows an 'other' category. What is this?

When I plug my iPad in to sync with my mac desktop, the capacity meter shows an 'other' category. What is this?

Could be contacts/favorites/history/notes/etc.
It is normal for there to be 200 - 800 gb in other.

My iPad won't sync with apple tv home sharing my laptop appears in computers section but even though I have turned home sharing on my iPad and used same apple Id

My iPad won't sync with apple tv home sharing my laptop appears in computers section but even though I have turned home sharing on my iPad and used same apple Id.can anybody help plz

you have to go to your atv's settings and remove the sync setup with the in the atvs eyes "old" computer
before you can add the "new" computer as a sync computer
an atv can only be set to sync with 1 and it don't know the "old" computer is not just off

My ipad won't sync with itunes, can anyone help

My ipod tpuch and ipad won't sync with itunes even though they are recognised by my comuter. i have uninstalled and reinstalled itunes but still won't sync. How can i get my equipment to sync with itunes?

It has been shown there are problems with the latest update of iTunes and Windows computers. What you need to do is remove and reinstall iTunes, and make sure that you follow the steps in this support document exactly. http://support.apple.com/kb/ht1923. If you do not follow them exactly, you will just compound your problems. Once you do this, you should have no trouble having the phone recognized in iTunes.

IPad won't Bluetooth with iphone

iPad won't Bluetooth with iPhone 4s

Hi kalidongnv,
Thanks for visiting Apple Support Communities.
These troubleshooting steps can help if your iPad won't pair with your bluetooth speaker:
Check that you are in range of the Bluetooth device with which you are trying to pair your iPhone, iPad, or iPod touch. Most Bluetooth devices have a range of approximately 30 feet.
On your iOS device, tap Settings > Bluetooth and find your device in the list. If your device says Not Connected, tap the name of your device to attempt to connect it.
Tap Settings > Bluetooth and turn Bluetooth off and then on again.
Make sure that your Bluetooth accessory is turned on and fully charged or connected to power.
Restart your iOS device.
Tap Settings > Bluetooth and locate the Bluetooth accessory you are currently connected to or attempting to connect to. Then tap and Forget this Device. Try to pair your Bluetooth accessory again.
Note: You may need to re-enter your Bluetooth accessory PIN if your accessory requires one. Some common PINs are 0000, 1111, and 1234.
Restart your Bluetooth accessory by turning it off and then on again1.
Update your device to the latest version of software. See how to update your iPhone, iPad, or iPod touch.
If your Bluetooth accessory has upgradeable firmware, check to see that you have the latest version1, 2.
The steps above can be found in this article:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
All the best,
Jeremy

When selecting the camera on 3gs the screen just goes black i can still take a photo using the top volume button but not with the screen please help

hello there
when selecting the camera on my 3gs the screen goes black and has no responce i can take a picture with the top volume button but cannot see it until i open photos
please can anyone help
thankyou andy

Try closing the Camera app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset (unless this is what you mean by powering off and restarting) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed." After clicking on "OK" another box pops up saying "The server responded with an error." How can I get rid of these?

When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed," and after clicking ok there is another box saying "The server responded with an error." How do I get rid of this. The calendar functions all right, but just have to close both of those boxes after doing any action in the calendar app.

Please take each of the following steps that you haven't already tried, until the problem is resolved. Back up all databefore making any changes.
Step 1
From the Calendar menu bar, select
Calendar ▹ Preferences ▹ Accounts
Choose the affected account from the list on the left and uncheck the box marked
Enable this account
Then check the box again. Test.
Step 2
Make a note of the account settings, then delete the account and add it back with the same settings.
Step 3
If you can't add the account, the settings may be invalid. Verify them. How you do that depends on what kind of account it is. If it's a Google calendar and you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.
Step 4
Quit Calendar. Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

When I connect with someone on FaceTime, the camera shows me sideways and no matter how I turn it, it is the same. How can I fix this?

When I connect with someone on FaceTime, the camera shows me sideways. I have tried turning it in all directions but no good. What can I do to fix this?

Hi nana450,
If you are having unusual rotation issues in FaceTime with your camera image, you may want to try a restart/reset of your iPad, as outlined in the following article:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Regards,
- Brenden

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

My ipad won't shoot with filters when in the camera app, what do I do?

Similar Messages

Maybe you are looking for