My ipad wont boot up past the apple icon
my ipad wont boot up past the apple icon
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Similar Messages
-
I have been given a iphone3gs today and after restoring it to factory settings like i was adviced to, my phone now wont boot up past the apple logo, it will switch to black screen if i press both buttons. I havnt managed to sync it to itunes. how do i get it to work???
Try to connect in recovery mode, explained in this article: iOS: Unable to update or restore
-
I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help
I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help
Put your ipod in recovery mode and then restore your software again.
-
G5 mac wont boot up past white apple screen
My kids mac wont boot up past the white apple screen. I can here everything running but the monitor starts to get all static and scan lines with a reddish tint to it. I tried the commandoption+pr but it still wouldn't boot-up past the white apple screen. Not sure what else to do. Any help would be greatly appreciated. Thanks in advance
Hi there Peter,
Not cheap anyway you look at it sorry, professional Data Recovery being the most expensive.
Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.
If Disk Utility or fsck should fail to repair it, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius 2…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro 4…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
This one would require another HD with plenty of space to recover to.
You should use another Boot Disk or other Mac with this one in Target mode to do the recovery.
They have a free demo to see what it could recover. -
i have a i phone 3 that wont start up past the apple logo can u help cheers
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
My i mac wont boot up past the start screen
My imac wont boot up past the grey screen with the apple logo, the progress bar gets to about midway and stalls at this point.
I even left the system on in this state for the remainder of the day to no avail.
The original problem which resulted in the grey screen, was that when the system did boot up i had a black screen with only the task bar, however when the task bar tabs opened i could not get any of the options to actually operate/function. At this point i turned the system of and after the third attempt the system faltered to the grey screen.
I have tried the Safe mode boot/nram/pra/smc rests but the system still stalls midway on the progress bar, even holding the c key.
Help please....See if the computer will boot into the Recovery Partition (Command + R on startup) if it won't that means the HD has likely crashed and the ONLY thing to do is get it serviced.
-
my iphone 3gs died and now it wont make it past the apple logo screen so i put it in recovery mode and hooked it up to my itunes on my home computer now it will say do you want to restore this iphone i click ok but then after it exctracts the software then starts to restore the screen goes black and it shuts off then 10 seconds later it turns back on it wont make it past extracting software please help me im getting really mad plaease help. it wont restore my phone and the error message 1611 come up i dont get it.. also the lock button on my iphone is broken and only works when i squeeze the topo of the iphone together so i cant put it in DFU mode
Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
-
My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!
Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iMac wouldn't boot up past the Apple logo...
My iMac wouldn't boot up past the Apple logo, so I tried to boot up from the install disk. Now all I have is the icon for a folder with a ? Mark on it and it is flashing. Now I can't get my disk back out. Any suggestions?
You cna get the disk out by holding the left wired mouse button and/or the option key down on a wired (not wireless) keyboard while booting up the machine and then pressing the eject key when Startup Manager loads.
The flashing icon on the folder is the firmware can't find the bootable volume assigned to it. Could be a software or hardware problem, could be it forgot or can't find it.
If you booted with the option key held down, then if you see your OS X boot volume then select it and hold the Shift key down for Safe Mode, set System Preferences > Startup disk again.
..Step by Step to fix your Mac -
My ipod won't do anything. it wont charge, turn on, the apple icon wont appear, it won't go into reset mode or dfu mode. Itunes wont recognize it, and no buttons work. The screen is black, and nothing i try will turn it on or give any sort of hope. It did this suddenly without any warning... what do i do? is there a way for me to fix it or is it beyond help?
Hello, pravin729.
Thank you for visiting Apple Support Communities.
I understand that your iPod touch will not turn on. I would start with going through the troubleshooting steps in the article below.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
http://support.apple.com/en-us/HT201412
Cheers,
Jason H. -
my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?
Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.
-
My iphone 2g just went dead and wont turn on past the apple logo
Hey Guys,
i got apple iphong 2g 8gb and it just went off after tryin to recharge it using AC outlet.The phone wont get past the apple logo after doing all the stuff i found out in my thorough search in the internet.
I tried all stuffs like hard reserts by holding the sleep+home button but it wont help either coz its restarts and shows the apple logo for a few seconds theng BANG! its off...
I also tried a custom restore by downloading a 3.1.3 ios ipsw file from some website coz i didnt even know what firmware my phone was running on then putting the phone into recovery mode but after itunes extracting the software it tries to install it into the iphone and the iphone would just restartve, apple logo for a few seconds then off...itunes then gives me error 1603.Tried restoring a million times with the same results even when on DFU mode.....
Guys i need a serius help from every corner coz ma i really love my phone....and i wont care if the solution involves deleting everything in it....i just dont understand why it doesnt even restore.....
pllzzzzzzzzzHere are some suggestions: iOS: Device not recognized in iTunes for Windows
Did you try to connect in recovery mode? iOS: Unable to update or restore
Did you check if Apple Mobile Device Service is still active? iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Ipad wont turn on..only apple icon
ipad wont turn on..only apple icon
Hi lnghrn88,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting suggestions that’ll resolve most issues like the one you’ve described, where your iPad is only starting up to the Apple logo.
iOS: Not responding or does not turn on - Apple Support
Cheers,
-Jason -
My Ipad device is only showing the apple icon nothing else is happening..what's wrong
How do I get my screen to come back on, it is only showing the apple icon.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
Is my ipod broke if it wont go past the startup screen with the apple on it? It will not even connect to itunes or anything after the update to ios6
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?
-
JS error while using input fields with type=file on XP SP2
Hi all, we found a new problem in applications which use input fields with type=file running in a browser on Microsoft Windows XP with SP2. A typical test layout might look like: <html> <head> <title>File-Upload</title> </head> <body> <
-
How to transport data from one tab to another(mapinfo)?
Hello all, due to a change of design i have to transport datas from one spatial table to another in order to use them in mapinfo. How can i handle this with polygon datas? if i just do a simple "insert into tab select * from anothertab; all std datas
-
I'm using JetForms 5.3 and have the following question: A .tdf file has a #startscript section which outputs various stuff. In this section I want to output a global variable name as a literal but Jetforms always outputs it as the contents of the va
-
anyone who can help me to get the course material of oracle 10g database administration workshop I. Best Regards in advance!!