My ipad wont respond when i plug a charger into it

So about a week ago my ipad wouldent respond when i connected the wall charger to it, But if i turn the ipad fully off and leave it over night it would charge to 100% but then run out of battery fast, ive updated my ipad and the update said it would fix a battery life bug but nothing seems to have happend...last night it was at about 56% and then it randomly started charging again and then stopped at 58%'i dont know what i did but all i know is that the ipad charger still works and the cable still works, any ideas?!?

Correct, as most computers do not supply sufficient current. It may charge, but very, very slowly. It would be best to use the included power supply.

Similar Messages

  • What should i do if my ipod turned off and the batterie isn't dead  and my computer wont respond when i plug my ipod in

    what should i do if my ipod turned off and the batterie isn't dead  and my computer wont respond when i plug my ipod in

    hey there...i have the same issue i turned off my ipod and not i cannot start the unit again. I bought this in Dec and know for sure my batterie is good....please help......

  • When i plug my charger into my iphone my phone doesnt let me do anything but when i unplug it , it works perfectly whats going on

    how come when i plug my charger into my phone my phone doesnt let me use it but when i unplug my phone im able to use it

    Hi Bella__,
    Thanks for visiting Apple Support Communities.
    If your iPhone is unresponsive when it is charging, first try restarting or resetting the device:
    If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    From:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    All the best,
    Jeremy

  • When I plug my charger into my ipad4, I have to jimmy the cord to get it just right for the battery to start charging. Anybody else?

    I think my charger has a short in the cord. I have to wiggle it and get it just right to get it to show that it charging.

    Take your iPad cable to the Apple Store. Either the charging port or the cable is bad. Something will most likely need to be replaced.

  • When I plug My Charger Into My Mac It Won't Connect.

    Do I just need a new charger? Sometimes it will connect but if I move the computer it will lose connection. My battery is about to die so help quickly please! Thanks.

    Test with another computer and another cable
    To discover if the problem is eith the phone the cable or computer

  • My ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer

    my ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

    My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB.  I get an error on my PC stating that device attached to USB port is not recognizable.  Can anyone help?

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694

  • Why wont my phone charge when i plug the usb into my laptop?, Why wont my phone charge when i plug the usb into my laptop?

    why wont my phone charge when i plug my usb into my macbook air?

    Most USB ports can't supply the power required to charge a phone.
    The original USB port was limited to 0.5 amps at 5 volts which is 2.5 watts.
    Your phone probably has a 10 watt charger.
    Recent machines allow more power from the USB port but I doubt they allow 2 amps which is what would be required to get 10 watts.  Even if they did a 2 amp draw is going to be a heavy load on the MBA battery.

  • Hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

    hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • Ipod software license agreement wont disappear when i plug in my ipod!

    *ipod software license agreement wont disappear when i plug in my ipod!*
    it says save.. and i save it and its supsoed to go away and it doesnt. so i pressed cancel and it disconnects my ipod completely.. HELP

    Are you seeing a Continue button anywhere? Click the little Agree box then the Continue button, there's no need to save the agreement. If you aren't seeing all the buttons try increasing your screen resolution to at least 1024x768 so you can see the whole page, you'll find the instructions on this Microsoft page: Windows XP - Change your monitor resolution

  • Iphone wont sync when i plug it in

    iphone wont sync when i plug it in

    What happens? If itunes doesn't recognize the phone try this: http://www.apple.com/support/iphone/assistant/itunes/

  • My iphone wont respond when fully charged and kept on mains charge is this right?

    My iphone screen wont respond when fully charged and kept on mains charge is this the norm?

    No that isn't normal.

  • Side scrollbar doesnt work and wont respond when i drag it

    side scrollbar doesnt work and wont respond when i drag it

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    #Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
    #* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
    #* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    #In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
    #In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    #Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Also check to make sure that the mouse/trackpad driver is up to date.
    Thank you.

  • ITunes not responding when I plug in my iPod

    Hey all, I need some help. Recently when I plug my iPod into my PC to update my iPod with the new music that I have loaded into iTunes, as soon as I do iTunes stops working and when I checked in my windows task manager under appplications/status it says iTunes is not responding. when my iPod is not plugged in, iTunes works fine. I can't get past this. Yes I did load the updated software, it didn't help. Does anyone have any suggestions?
    Thanks,
    Todd

    This is also happening to me updated latest version of Itunes. Itunes works fine but doesn't show the ipod when I attach. Tried most of the hints on the web site but nothing is working. Plugged the ipod into my base station and hey presto it works fine. I have also tried top re load the ipod software on the lap top but this isn't working either it asks for the ipod to be plugged in when it is plugged in it doesn't see it. Yet in windows explorer you can see the ipod is connected. Any idea's anyone. Shall i try to install version 6.0.0 of itunes instead of the latest version ?

  • ITunes stops responding when I plug in my iPod.  I have updated iTunes to latest version, still crashes.  OS is Vista.

    iTunes stops responding when I plug in my iPod.  I have updated iTunes to latest version, still crashes.  OS is Vista. How do I fix this?

    Hm... Strange.
    I had reset the iPhone.
    I tried disabling the auto-launch of iPhoto, and...
    ...when I plugged iPhone in, it started to freeze iTunes, but after a minute or so, the iPhone started synching. I found this odd because I had disabled auto-sync (I press Sync in iTunes when I want to have it Sync).
    Now, of course, I do want auto-launch of iPhoto back on, since I like it for when I attach my digital cameras. I hope that when I set it back, it won't re-introduce the problem.
    The restart I did may have helped. I resist restarting because my wife's account is often open and she frequently leaves unsaved files up, so it is a pain to respectfully close out her work and then restart.

Maybe you are looking for

  • Updated to IOS 7 and now itunes will no longer sync my entire music library

    I just got off the phone with an Apple Senior advisor.  I advises that I had just updated to IOS7 and was synching my iPad only to find out that it would not synch any music that was not downloaded through itunes. I have 865 songs that I have accumul

  • Display issue with Macbook after SL upgrade

    Hi, I have a 2007 13" MacBook which I use to drive an external video projector via a mini-DVI to HDMI adapter (external video monitor set to 1080p@24Hz). It manages 1080p, just barely, with some hiccups on complex material. But the signal itself is a

  • Links in Browser View

    Everytime I view my website in browser view through dreamweaver, the links do not work. IT works the first time, but after that when i try to click another category such as "About Us" It just add a "#" to the link up top and dosent move to the page.

  • Web services question

    Hi! I am a bit confused about using web services with custom classes. I read it's a bad idea to use for example ResultSet as return type for a web service since non-java client implementations would not work and that the correct way is to create a Be

  • Is any reason to define FQDN name different as Net-bios name?

    hello friends i create an active directory on windows server some days ago, one friend told me FQDN name should be different as Net bios name, he told me for some authentication services (for example for authentication in a hardware firewall) this na