My ipad wont wake up? When I plug into my mac it shows 100% battery and all my app's? What is going on.
My ipad all of a sudden won't wake up? I plugged it into my mac desktop and it shows it as if it is awake, all my programs are intact, it updated and sinc'd, but no response when not plugged in. How do I wake it up? Do I need to reset it or something or is there a light in it that can be replaced? No idea what is going on. No damage or drop has occurred.
http://support.apple.com/kb/ht1430
Try the additional infomation section to hard reset the device and see if this resolves it.
Similar Messages
-
it wont read albums, then freshs and plays random tracks. I cant control it at all though the car audi system (audi q3 2013).
Worked perfectly before updatethere isnt a setting that will allow that to happen.
the phone cannot play audio/video through the usb. it is for data transfer and charging only.
your cars radio integrates and controls your iStuff because it has the software integrated to allow for it.
if you have bluetooth, just connect your device to your car through bluetooth and play it that way.
my pioneer still allows me to pause, play, fwd, etc on my nokia that way. i just cannot go through the menu system. -
I have an iPhone 5. It says I have 537 songs on it but every song shows the cloud icon. I have gone through every suggested step I've googled and deleted songs but settings still shows them. When it's plugged into my mac itunes shows it only has 42 songs.
Hi ellafromva,
From your description, it sounds like you may have iTunes Match activated; you may find the following article helpful:
Apple Support: iTunes Match on iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5637
Regards,
- Brenden -
I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on
Is your iPhone not showing up in iTunes sidebar, or is iTunes not just launching automatically?
The things that you can check are:
1) Launch iTunes manually
2) Restart or reset your iPhone (http://support.apple.com/kb/ts3281)
3) Check your cable including disconnecting and reconnecting it on bot the phone end and the computer USB end.
4) Reboot your computer
5) As a last resort, take it to the Apple Store so they can check the hardware -
MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside
Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao. -
When I sign into my mobile me account the username and password is not recognised what do I do?
- Go to settings>iTunes and App Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
Hi, I just got my new iPod Nano 4th Gen. and the screen is blank... It's not on and its plugged into my Mac OS X Mountain Lion. I don't know what to do. Help!?
If it is plugged into a USB hub (or the spare keyboard port), try connecting it to a direct USB port.
Also, try doing this Reset procedure, while it is connect to power.
http://support.apple.com/kb/HT1320
NOTE: A new iPod nano is 6th gen. -
ipad froze up when i was updating itunes with ipad plugged into computer. now ipad just shows a picture of a cord with an arrow pointing to the itunes logo. does anyone know how to free up my ipad. ive tried unpluggin it and plugging it back in to itunes but nothing unfreezes it.
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I'm trying to install a samsung series 7 750 monitor for use with my mini mac. When I plug the computer to the monitor I get a blank screen, no picture. When not plugged in to the computer the screen is black and a square displAys that says analog, HDMI 1, HDMI 2. Any ideas?
Hey there saraszeg,
It sounds like you are trying to use an external monitor with your Mac Mini but cannot get more than a gray screen. You can use the following steps to help troubleshoot the Mac side of things here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Is this just a bug in the new iOS for iPad 2? Cause I also updated my iPhone 4S to iOS and it shows proper battery levels. Any one else having this issue? If so is it a known issue?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
Also, just use your iPad until it drains of power and then recharge it. It might sort out the glitch! -
My phone wont turn on when i plug into charger HELP!!
Hello, please help me I have an iphone 4 and it was working fine before but one day it was low on battery. I decided to charge it and it wont turn on and i left it in there a couple hours and still wont. So i have 2 differen't iphone chargers i tried both of them none work i dont think its the orignal charger that comes with the phone though. I dont know if that has anything to do with it or not but i was thinking it was the charger but i'm not sure. ANY help is appreciated i just wanna start using my iphone again. If you have more questions about the charger or phone please ask i will answer ASAP!
Do you know where i can buy an original iphone charger? Or will the place i bought it from let me use there charger until i get it atleast half charged so i can use the usb charger? Also thanks for your reply i thought no one would answer the question.
-
Please answer my question asap!! And when I fixed it the guy said there was nothing broken on the inside (didn't fix it at apple btw)
Take it back to whoever "fixed" it, or buy a new phone. Apple won't touch it now.
-
My ipad is not charging, when I plug it in to charge it blinks on and off continuously. Any solutions?
See:
http://support.apple.com/kb/ts1440
Note that this article is a bit outdated, so if you are using a recent system running Mac OS X 10.7 or 10.8 (Lion or Mountain Lion), see the following article for help repairing the hard drive:
http://pondini.org/OSX/DU6.html -
My iPad 3 always shows 100% battery
My iPad 3 always shows 100% battery and suddenly it gets off post complete discharge.
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
-
i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.
Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5 or Later
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages
Maybe you are looking for
-
Connecting my iPhone to my printer
It keep saying no printer found and when I try to add my printer it doesn't show my printer but others. Can I use D100?
-
GR Cancellation at Depot for excisable material
Hello there, Could you please explain step by step best process to cancel GR [101] of excisable material at Depot? Thank you Sameer
-
Anyone knows how to do web report in 6i that contains graph? please guide. thanks
-
I am not sure this is Firefox, but I will start here. When I Google something, I am directed to what appears to be a third part website. Nothing like the site I am seeking. Example Dean Foods request takes me to the Google site with what looks normal
-
OIM11g event handlers - entity type as Role
Hi , I have a quick question. In OIM11g, can we have event handlers attached at role level. When a role is created/deleted in OIM, I need to perform some operations. Can someone suggest if its possible?? If yes, what is the entity-type I have to use.