My iPad2 does not appear in Network MIDI set up .... HELP!!

I have bought an ipad 2 to control Logic Pro with AC-7 core but I cannot get Network MIDI Setup to recognise my iPad 2.
I tried downloading rtp MIDI and trying to get Windows 7 to recognise my iPad 2 but still no luck.
I have tried creating an Adhoc network direct between my iPad 2 and my iMac .... no go!
I have downloaded Tildesoft Bonjour Browser to see if my iPad appears under Bonjour services and it doesn't?
I tried restoring my iPad 2 software .... still no help.
I checked my Netgear router and that shows my ipad 2 appearing as a device with the correct IP address but that as far as I can get,
I just cannot understand why my iPad 2 remains invisible to all my computers and network permutations.
I thought Bonjour was meant to be zero configuration technology!
Any help would be much appreciated
themarqueeyears

OK found a solution.
1. I logged out of my iMac and logged back in and did the same with my Windows laptops.
2. I unplugged my Virgin cable router from the back of my Netgear wireless router as I had read that your ISP can interfere with setting up Network MIDI.
I'm not sure which one did it, if it was doing both these things but my iPad 2 now appears perfectly on my MIDI network and I can control Logic Pro 8 with AC-7 Core.
Once I had my iPad 2 working over my MIDI network I was able to plug my Virgin cable modem back into my Netgear router without it effecting my wireless MIDI network.
best
tmy

Similar Messages

  • HT201263 When I connect to itunes it does not appear in the devices..please help me ........how...its URGENT...

    When I connect to itunes it does not appear in the devices..please help me ........how...its URGENT...

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore  should be very smooth.
    Roger

  • Ipad2 does not appear in Organizer...

    Hello there,
    i want to install iOS5 Beta to my iPad2. i use xcode 3.2.3.
    The Organizer cant find my iPad2 or iPhone4.
    So i cant make it to a developer device...
    do i need xcode 4.2?
    where i am wrong?
    thx
    steffen

    Ever have that feeling you are breaking more than you fix? lol.  No ipad syncing for me still.
    List of things that haven't worked
    (ipad sync checked after each step)
    try different usb ports
    restarted ipad
    restarted pc
    updated itunes
    restarted pc
    disabled wireless internet
    restored windows
    restarted pc
    deleted 'saved photos'
    updated itunes (change log said is required for syncing latest ios version)
    restarted pc ( itunes now broken and no longer runs)
    ran itunes installer
    updated itunes library
    restarted pc
    iPad2 does not show up as a device in itunes to begin sync.
    More information: When I restart my pc, I wait for startup to complete then I connect my ipad. iTunes launches and is unresponsive for the few minutes it takes to startup.  When iTunes completes start up, my ipad is not listed on the left pane.
    If I launch iTunes prior to connecting my ipad. iTunes will launch normally.  I notice that after I connect my ipad iTunes freezes up (like it's trying to start sync but fails). After a few minutes of being locked up, iTunes begins working again however the sync never started. No error messages.
    Since ios firmware version seems to be important (neither of my devices can sync)
    ipad2 - 4.3.2
    ipodtouch3 - 4.3.2

  • "Organize Bookmarks" does not appear under Bookmarks menu, even though Help advises to go there.

    I've needed to eliminate Bookmarks. Because I have no "Organize Bookmarks" or "Manage Bookmarks" option under the Bookmarks menu, I've tried dragging bookmarks off the list onto my desktop. I've tried right-clicking to get a "delete" option (but there is none). I've gone to "Help" where I'm advised to click on the Bookmarks menu item, select "Organize Bookmarks," and proceed from there. An image of the items in "Organize Bookmarks" appears in this "Help" instruction. BUT -- "Organize Bookmarks" does not appear when I click the Bookmarks menu item.

    That menu item was changed to '''Show All Bookmarks''' in Firefox 4.0.

  • I have a MacBook Pro. When I go to system preference, the external speakers option does not appear in the Input tab. Help?

    I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?

    When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.

  • Archmobile: GTA02 freerunner does not appear as network interface.

    I installed Archmobile on my GTA02; unfortunately it seems my microSD is one of those where the GTA02 is unable to boot from.
    Consequently I had to install in the NAND. According to the ticket 121 I changed the
    usb0 line to eth0 in rc.conf.
    So, the installation went as follow:
    - download a openmoko snapshot.
    - changed the rc.conf.
    - changed the fstab so that /dev/mtdblock6 is mounted as / with jffs2 filesystem. (other values: defaults 0 1)
    - made a jffs2 image from the snapshot (just used jffs2 -o ../snap.jffs2 from the directory).
    - flashed the openmoko rootfs with the jffs2 image
    - flashed the bootloader with the provided one.
    My intention was mounting /home, /var and /usr on the microsd, but to begin it is fine.
    Finally I booted the device: Archlinux starts, but it fails on "Updating Module Dependencies". All other start-up messages say `Done' and even loading uevents is fast (less than one second).
    The prompt arrives and waits (I also removed the `delete screen' from etc/issue)... unfortunately even if the ssh and network daemon is started when I connect the usb cable to my pc nothing is shown in dmesg, nor in lsusb. The phone seems not-there. Of course since there is no keyboard I cannot control anything.
    What can try? I would really like to have arch on my phone and possibly support the archmobile community.
    Maybe a module is not loaded, but what one? If so adding it to MODULES might help?
    Or the Update Module Dependencies is a critical failure? How can I explore the matter?
    Thanks
    pb

    Wish some Apple folks would chime in...
    Apple is not here. Even if they might rarely monitor these boards, they will not respond. We're all users, just like you.
    Suggest that you open Macintosh HD > Applications > Utiltiies > AirPort Utility
    Click Manual Setup
    Click the Wireless tab below the icons
    Click the Wireless Options button
    Check one more time to see if you still have the 5 GHz Name option enabled. If not, enter a check mark and click Update to save the new settings.
    If 5 GHz is enabled, temporarily disable the setting and Update. Then go back in and enable the setting again.
    If you still cannot "see" the network from any device, about all that you can do at this point is reset the Time Capsule back to factory defaults and try the configuration again to see if it will "take". Lion is causing some strange issues, and this may be another.
    If this is not successful, then it's time to contact Apple support or arrange a visit to an Apple store to let them take a look

  • IPod touch 5th gen will not connect to iTunes, also apple mobile device usb driver does not appear in device manager. PLEASE HELP.

    I recently purchased my iPod touch with no issues. After updating to iOS 8.1.1 I found that my iPod would no longer appear in the latest version of iTunes and when I searched for Apple Mobile Device usb driver in the device manager, it was nowhere to be found. I've already uninstalled and re-installed ALL components of iTunes and read every single help article. I've tried everything. What went wrong?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • New Region does not appear in standard page (Please Your Help).

    Hi Experts,
    I tried to create in javadeveloper a region to have descriptive flexfields shown in standard page with the following structure :
    Region (stacklayout)
    Region (messageComponentLayout)
    Item (messageLayout)
    Item (flex)
    Then I used import command to move XML file to the sever .
    Afterthat in self service I created an item of stacklayout type with specifying the required fields like Application module and extend field but I am not able to
    see the region in standard page , is there any anything missing please your help?
    Thanks,
    Kind Regards,

    Please try this > Make the AM property of your new region to be blank . Also check if your custom controller of your region has correct logic.
    Repeat the deployements steps and bounce the server.
    All the Best.

  • I currently have Firefox 21.0. The 'Download Video' does not appear when I play videos. Help !

    Hello,
    I play a video in youtube. It plays fine. But I can not find the 'Download Video' button when I put my cursor over the video.
    Please help.
    Thanks.
    Mala

    If you are using Internet Download Manager, make sure that you are using latest version of IDM?
    * http://mirror2.internetdownloadmanager.com/idman615.exe?b=12
    make sure that '''IDM CC''' extension is enabled?
    * Go to Firefox/Tools>Addons>Extension and check if it enabled or not

  • I downloaded myscrapbook nook toolbar, but it does not appear on my home page. Help!

    After finding a scrapbook site that I believe would suit my needs, I downloaded the "my scrapbook nook" toolbar. The download was successful, but the toolbar is not on my home page. I checked Tools-->Downloads, and it is listed. How do I find the toolbar and bring it to my home page with my other tool bars? This has also happened when I tried other downloads. They seem to disappear. If I find them, e.g., in programs, I can't get them to my desktop for easy access or do anything with them.

    Downloaded into your Download folder, but not yet installed. You have to install it.
    If you can't find the iTunes.exe in the Download folder, use your computer's Search facility to look for it.

  • Swf file does not appear in Captivate

    Hi,
    When I import the swf file into Captivate, it only appear in "preview" mode but when I publish it does not appear....
    Please help!!
    Thanks
    Syl

    Hi Syl,
    What version of Flash Player are you having in your Internet Explorer? Captivate uses this Flash Player in preview.
    What is the Flash Player version of the imported swf file?
    Where are you viewing the published file - in IE, FF or standalone player? What is the version of Flash Player there?
    Does preview in browser work?
    Check these things. There might be a Flash Player version problem.
    Regards,
    Ravi Kishore.

  • After editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4

    after editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4 can anyone help?

    In Library, set your sort order to Filename instead of Added order and see if the files show up, then. 
    How are you doing the Save in PS, using Save or Save As—one will show up, one won’t, I think, but I don’t remember which.

  • Ios6 - wifi log in does not appear for secured network

    Hi,
    I installed ios6 on my ipad2 last night.
    Today - when I connect to a secure wifi network via settings, the log in screen does not appear, like it used to do automatically.
    Is this an issues with the OS? Can anyone suggest a fix or a solution?
    Thanks in advance

    I still haven't resolved this. At present, the wifi is visible - but the log on screen does not pop-up, so I am unable to log on.
    Anyone have any fixes/solutions?
    Thanks

  • I am trying to set up Sharing amongst several computers on my home network.  I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up).  There is no explanation why.

    I have been trying to set up Sharing between two computers on my network. I did this once and it worked.  However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer).  There is no explanation as to why not.  Is this a configuration problem, a network problem or what?   Can it be fixed?  I have tried turning sharing off and back on on both computers but to no avail.  What am I missing?  Thanks for any help you can provide.

    Hey innerev2003,
    Thanks for the question, and welcome to Apple Support Communities.
    If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
    If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
    iTunes 11 for Windows: Manage your iTunes Store account
    http://support.apple.com/kb/PH12507
    Thanks,
    Matt M.

Maybe you are looking for