My iPad2 doesn't have FaceTime and I have trouble uploading photos on FaceBook. Can somebody please help me. Thanks.
Why is my iPad2 doesn't have FaceTime and unable to upload photos on FaceBook?
Check out the app F PhotoLoader. http://itunes.apple.com/us/app/f-photoloader-lite-for-iphone/id443369289?mt=8
Cheers, Tom
Similar Messages
-
I'm trying to get on the internet and it is saying unable to connect to your server any ideas what I have to do to get on the internet I know the ethernet cable is OK.
Disconnect the ethernet cable from your mac,
disconnect the modem and the router from the power,
wait for at least 30 seconds,
connect the power to the modem, wait for at least thirty seconds,
connect the power to the D-Link, wait for at least thirty seconds,
connect the ethernet cable to the mac. -
I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?
Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread. -
my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .
my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .
-
Can somebody please tell me what 'genius' included 'family' in reminders, and, made it so i cannot remove it. I have NO family, and, i find this particularly hurtful and disrespectful. Can somebody please help me remove it.
Hi EmmeElle,
Is it an iCloud reminder or a third party reminder like from an Exchange account(maybe your company provides this service together with mail etc..).
In the first case you should definitely be able to delete it by right click->delete or via https://www.icloud.com
In the second case there might be a browser based settings page from your company or the provider of the service (i.e. Exchange) itself. Otherwise you can go to your System Preferences -> Internet Accounts and deactivate reminders for this account. WARNING: this also deletes all other reminder lists and reminders from this service on your mac.
jl -
My husband and I were trying to setup FaceTime and now his cellphone number is on my FaceTime setting instead of mine and I'm receiving his text messages. Can some please help .
On each device, go to Settings > Messages > Send & Receive. Make sure that each device is using separate addresses and phone numbers. If your email address is checked on both devices, Your husband will recieve everything he intends to send to you.
Do the same for FaceTime. -
I have a new hp windows 7 64bit computer and I can't download itunes. It gets to 11%, 63% etc. and just freezes! Can somebody please help???
Try using Migration Assistant following this guide:
http://support.apple.com/kb/HT4413#3
There is advice in this document for using Migration Assistant from Time Machine or other hard drive. -
my ipod touch 4th generation 8gb screen just broke yesterday can i get a new one or do i have to pay? because i put a 2 year warranty and next year the warranty will end.. can somebody please answer my question asap Thank You!(:
You will need to pay to get it fixed. Check out options in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I have a black Apple TV that has recently stopped working. It loads the Apple Logo on screen then goes off and starts again. It's as if it is stuck in a loop. I've tried a re-boot and this has failed. I have tried a restore using a USB cable on 5 different computers, including a Mac Book Pro and it downloads the update file but when it tries to restore I get the error code 9 showing on screen. I just can't get it to do anything.
Can anyone please help?Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?
Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed -
I just want to know that if I buy an iphone 4S here in melbourne can i use it in china?
i don`t know whether it`s locked or not and i don`t know what`s the network in china as well.
Can somebody please help？
I am really in a hurry to know it.
Thanks a lot.
P.S: For the iphone 4S. is there any difference for the one from online shop or the actual store?iPhones purchased from the online Apple Store in Australia will be unlocked. To the best of my knowledge, unlocked iPhone are not available from the physical Apple Stores at this time, though you can call the Apple Store in Melbourne and inquire.
Note that the warranty on iPhones is not international, so if you purchase an iPhone in Australia and it needs service, you would have to ship the iPhone to someone in Australia to take or send to Apple for service and then ship it back to you.
Regards.
(Note for any readers: this is an old thread and I posted before noticing the date, but decided to leave my reply in case anyone else finds the thread and has the same question). -
Hey there.
Please help me.
Whenever i try to sync apps, tones, music etc, it says me to authorize my computer. But i had already authorized it and had even signed into my account. Can you please help me? I am facing this problems since long. please.
It goes like this.
Whenever i connect my iPhone5, it starts to sync. later when it reaches the 4th stage of 'Tranferring Purchases' it stops and says me to Authorize my computer.
But i had already authorized it and even signed my apple id.
Moreover, i have only authorized 1 out of my 5 computers.
Please help me.
I have been facing this from long.
Thank You.Hi Rameez,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is asking you to authorize your computer repeatedly:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best,
Jeremy -
I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue
I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again. -
I have a ram problem, can somebody please help me?
Hello
This is the first time I've put a computer together from scratch (I got some help from a friend though). What I wonder is if there is a manual for the MSI mothercards somewhere on the net because I didn't get any good description in the package, and I can't find the spot for audi and USB inputs. I also would like to know how many memorysticks i can use, because if i put in 3 of them the computer starts to beep. Can somebody please help me?
My specs are:
Q-tec midi Tower
MSI K8N Neo2-FX, nForce3
AMD Athlon 64 3200+ 2.0GHz socket 939
Zalman P4 CNPS-7700-CU
XFX Geforce FX5500 128MB DDR
Samsung Spinpoint P120 200GB
Sony DVD burner DL
Sony floppydisk
Cosair Value S. PC3200 DDR-dimm 512MB unbuffered non-Parity, 64Meg x 64, CL2.5
(I have 3 of these but I can only have 2 at a time or the computer wont work)
// TheGamecriticQuote from: TheGamecritic on 15-September-05, 18:42:56
Hello
This is the first time I've put a computer together from scratch (I got some help from a friend though). What I wonder is if there is a manual for the MSI mothercards somewhere on the net because I didn't get any good description in the package, and I can't find the spot for audi and USB inputs. I also would like to know how many memorysticks i can use, because if i put in 3 of them the computer starts to beep. Can somebody please help me?
My specs are:
Q-tec midi Tower
MSI K8N Neo2-FX, nForce3
AMD Athlon 64 3200+ 2.0GHz socket 939
Zalman P4 CNPS-7700-CU
XFX Geforce FX5500 128MB DDR
Samsung Spinpoint P120 200GB
Sony DVD burner DL
Sony floppydisk
Cosair Value S. PC3200 DDR-dimm 512MB unbuffered non-Parity, 64Meg x 64, CL2.5
(I have 3 of these but I can only have 2 at a time or the computer wont work)
// TheGamecritic
Congrats on 'Rolling your Own' for the first time. I'm certainly no expert although I have sucessfully built a few. Actually, my specs are almost identical except I'm using Kingston Value Ram instead of Cosair. As far as your first question, I assume you mean the internal USB/MB connectors and the MB audio connector(s). The information is in the MSI Neo2 Plat manual although you have to look closely and move back and forth between the MB schemaic and the section(s) describing the connections to get a clear fix. The MB USB connectors are on the side of the MB furthest from the RAM slots and about in the center, (JUSB1 or JUSB2). The audio connector (JAUD1 is located on the same side of the MB as the USB connectors only near the rear panel end, (close to the orange PCI slot). As you, I found that that I could not use three ram sticks as I could in my old K7 board and when I bought two sets of matched ram I found that it didn't like 4 sticks either. Three: Would'nt post Four: Instability and an initial hit in performance; although I was able to finally coax it to 200mhz Dual Channel it wasn't worth it because of the random crashes n Windows I was getting. I have also discovered the hard way that for some reason my board at least is hypersensitive to IDE cables, (Would not recognize any secondary IDE device on Channel 1 until I found the right cable) and it does not like Sound Blaster audio cards prior to Audigy 2 ZS. Actually, it only tolerates a ZS and I had problems and it didn't like my new X-Fi at all until I moved it to the PCI slot closest to my video card. I was getting random BSODS and crashes, (one that took out my OS). Since I move the card things appear to be more stable, so far. Anyway good luck. -
Mac OS 10.9.2 Reader 11.0.7 does not initialize, cannot fill in fillable forms and side scroll bars does not operate. Can you please help?
Perhaps you missed that you started a discussion at I have OS 10.9.2 and have downloaded latest version of Reader 11. I can no longer fill in form or scroll using the side bar. and you did not respond to the last post there.
-
I tried to downgrade my iCloud and when i did it never refunded me can you please help me with this thank you James
<Personal Information Edited by Host>How did you try to downgrade
(Don't post your telephone number in public places, unless you need more useless phone calls) I will ask for it to be removed.
Maybe you are looking for
-
Can't take the VOD_174 and VOD_127 errors any more!
Hello, Ever since I switched to FiOS from TWC, I experienced this issue: in the middle of watching a VOD movie (I subscribed all the On Demand features), the movie would freeze, then stop and display the error message VOD_174. If I'm lucky, I would t
-
I need to replace the motherboard on my dv6095 and this needs a 443774-001 - can anyone tell me if there is difference between this board supplied for the US market compared with one for the UK? I can obtain one from the US which is an updated ve
-
MS PPM 2013. May I hide the Gantt chart in Project Center
Hi: I know that in previous versions of Project Server you can't hide de Gantt Chart, but in Project 2013? Thanks Pablo
-
My B&W's front power button (and I'm assuming the others) don't work anymore since the CUDA button was held for a couple seconds. The computer still boots and works, but needs to be turned on via the button on the motherboard. Any idea how I can fix
-
CC has Java Script Plug in issues... CS5 won't let me see all my NEF files... help.
In CC I am trying Photoshop (I currently use CS5), and it says it doesn't have the java script plug in... am I supposed to magically pluck it out of thin air to get it? I'm not a computer programmer and I am finding CC to be a maddening experience. C