My ipad2 has developed a pink/purple haze screen for no apparent reason?
My Ipad 2 wifi 3g has developed a pink/purple pyschodelic screen for no apparent reason. Tried resetting but it won't go away .
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
A reset may help both issues. No data is lost due to a reset.
Similar Messages
-
My iphone 4 (Model MD128B/A) running iOS 7.1.2 has developed a problem when receiving calls, for no apparent reason. The caller can hear me, but unless I switch to speakerphone, I cannot hear them. The mute button still functions normally. I have rebooted the phone but this has not resolved the issue. Any ideas about how to resolve this problem? Thanks.
Hello manleyjohn,
Welcome to the Apple Support Communities!
I understand that you are unable to hear callers though the receiver on your iPhone 4 unless you change the sound to the speaker. In this situation, I would recommend reading over the attached article and verifying that the troubleshooting steps have been completed. If the issue continues, it may be necessary to follow the link towards the bottom of the article and contact Apple Support.
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
Have a great day,
Joe -
Hi I have been successfully printing from my ipad2 wirelessly to HP printer but for no apparent reason it has stopped . Any ideas please ?
Try clearing your printer queue. Double click the bottom button to see your active apps and scroll to find your printer app. Cancel all documents listed for printing. Hopefully you'll b able to print again. This solution worked for me recently.
-
since updating my iphone 3gs software it has developed the so called "white screen of death" this happened immediately after software install. It has never been dropped or damaged. I have tried the solution which seems to pop up most of holding down the power button and the home button for 10 seconds but this hasnt helped at all. Tried ringing apple, who were less than helpful and disinterested as the phone is out of warranty. I am hoping there is a solution which doesnt mean shelling out for a new phone! any ideas?
Basics from the manual are restart, reset, restore.
Try all of these.
If these fail, then:
iOS: Unable to update or restore -
For no apparent reason I got a response back from the iTunes Store saying " this card can not be used for the iTunes Store"
I have been using the same card for over a year no problem. Checked with my back looks good on their end.
Has anyone ran into this before?Thanks for the the information Tyler. I'm still in awe, I heard that if an LCD is over heating or the phone is over heating, there would be a warning message telling me that the device is over heating, not sure how true is this?
Nah I never dropped it yet, its too fresh and precious to me but the funny thing is no matter what care I took since the three weeks that I've had it, it still developed this problem. -
Using OS 10-6-8. For no apparent reason, mail refused to open, the icon in the dock changed appearance and the application has disappeared except in iWork. Under Iwork, the message says: "you tried to open Mail version 4.5 (1084/1085) in: /Applications/iWork '06. Using OS 10-6-8. It can't be used on thius version of Mac OS X. Try opening the version of Mail located in the Applications folder..." How do I get back to mail and retrieve my existing messages?
You should consider downloading the 10.6.8 combo updater and applying it again.
http://support.apple.com/kb/DL1399
Pondini has a great page about upgrading.
http://pondini.org/OSX/Combo.html -
My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.
Open System Preferences > Sound > Sound Effects
Select: Play user interface sound effects
And make sure the Mute box is not selected.
Now open Mail. From the Mail menu bar clik Mail > Preferences then select the General tab.
Make a selection from the: New messages sound pop up menu. -
My iMac (21.5-inch, Mid 2010) has rebooted twice now for no apparent reason, since the successful install of Yosemite.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Problem: my iPhone 4S (1yr old) has started buzzing for no apparent reason. I cannot stop it or turn the thing off. The screen is black and does not respond to touch. Any suggestions?
Thanks, AM_Kidd, I had tried that before but I tried again and this time it WORKED!!!!
The buzzing stopped and I have the home screen up again.
Phew! It may be that it had been on charge for the last 30 mins.
Whatever. Again, many thanks. -
After I clicked erase all data on my iPhone 4S it has been on the shutting down screen for over 10 minutes.. Will it ever cut back on?
Sounds like we have a similar problem. Four days ago I was playing music through a wireless Bose speaker via bluetooth and everything was fine. Then I was texting while listening and got 2 texts about the same time as I was typing one and my phone went black. I pushed the home button and it worked, went into my texts and all were there. However ever since then the time isn't right, so it can't keep time no matter what I do. The bluetooth works only at times, the wifi keeps jumping on and off, sometimes my data won't work and the other day I couldn't even turn it off, so had to wait until it died. The battery life display at that moment wasn't correct either. Took to Verizon, they couldn't help. Suggested a factory reset, which I did last night and still the same issues! One day I couldn't even text my husband on his iPhone. Just wouldn't work at all. Did everything suggest and still not good. Seems like after stalking these pages today a lot of people are having this problem in Dec/Jan and of course also I'm 3 weeks out of my 1 year warranty and so were many others, by days. Very strange, and all on the 5C. What did you do? Is it working now?
-
My ipod touch 64GB. It worked fine for a few months but now for no apparent reason it has stopped syncing my playlists. Operating sysytem on my ipod is iOS 7.1.2. My itunes is 11.3.1.2.
Please help.What exactly happens when you try to sync?
Does iTunes see the iPod?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod -
Any one else having iBook(2) in preview mode close for no apparent reason on the iPad2?
I created a single chapter book with a glossary using iBooksAuthor. The proof version in my iPad(2) iBooks(2) closes for no apparent reason when I swipe back and forth through the pages a few times. Is this something I should be able to debug or should iBooksAuthor catch issues before exporting to the iPad for preview? What are my options? I don't know where to look for error messages that might be sent to my iPad.
have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/How-to-check-your-messages/td-p/3547355 -
Airplay is dropping out for no apparent reason; it has ben working fine and will reconnect for a time and then drop again.
Hello Cate,
Thank you for the details of the issue you are experiencing with AirPlay on your Apple TV. I found a couple of resources I recommend for the issue you described.
If you are experiencing the issue when AirPlaying from from an iOS device, I recommend following the steps in the section titled "Troubleshooting performance issues with AirPlay or AirPlay Mirroring" in the following article:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
If the issue you described happens when AirPlaying from your computer to your Apple TV, I recommend the section titled "Troubleshooting performance issues" in the following article:
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts5209
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My iPhone was downloading iOS8 and it has been frozen on the loading screen for 5 hours
My iPhone was downloading iOS8 and it has been frozen on the loading screen for 5 hours, I have plugged it into my iMac but the iMac can't cancel the download without me typing in my password on my phone, which conveniently isn't working
It won't power off or on or anything, it is just stuck on the white background with black apple sign!!Hi esmelicious,
Welcome to the Apple Support Communities!
I know it can be frustrating when you run into issues updating to the new iOS. In your specific situation, I would recommend placing your iPhone in what is called recovery rode and restore it from there. Please use the steps and information located in the attached link to restore using recovery mode.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Have a great day,
Joe
Maybe you are looking for
-
Hi, I have been struggling with this for a few days now. i have pc where no outlook is installed, where i installed the MAPI CDO Runtime may update (version 6.5.8320.0). i checked in the registry that the default mail provider was set to exchangemapi
-
How to display images in forms
What are the steps to display images (say logo) in forms when running on web ? null
-
I'm writing on behalf of my mum, Basically in the simplest way I can put it every time I try to update apps on my mums iPhone its asks for my dad apple ID password instead of my mums account, i go on settings and iCloud, apple ID are all logged in to
-
How to use rowid in filter for datawindow?
I try to use filter to filter data in datawindow, like dw_1.SetFilter("column = value") dw_1.Filter() then I can get data from this datawindow like: GetItemNumber(row, column_name) GetItemString(row, column_name) but I want to filter expression like
-
2009 MacBook Pro (now MacBook) is not starting up correctly. Taking hours to reach the login screen from the initial power up screen. It is unresponsive while booting up but will eventually reach the login screen if it is left alone for long enough.