My ipad2 has gone haywire with apps opening and closing pictures flashing on safari history messages, key board etc. I have tried rebooting it to no avail.

My Ipad 2 is possessed. I was reading a book when the pages started flipping on hteir own, with apps opening and closing. I did a cold boot, but it was no help. No, it has not gotten wet.

Sounds like a hardware problem. Contact Apple Support.

Similar Messages

I have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

i have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

The two most likely culprits would be a faulty cable/charging block or a bad digitizer. Try charging the device with a different charger and cable. If the problem goes away, then the problem is with your charger. If it does not, try the basics of resetting, restoriing from back up, restoring as new. If you still have the problem, make an appointment at the Genius Bar at your local Apple Store for evaluation.

Ipod generation 1 apps opening and closing instantly with software version

I have a Ipod Touch generation 1 and have just downloaded version 3.1.3 upgrading from 1.1.5. I am now having a problem with all the apps that I have downloaded from the App store through the IPOD. The apps are opening and closing instantly.
Any comments?
Thank you for any advise and or help!

By a reset, I believe he is referring to holding down the Home button and the Sleep button both at the same time until the apple logo appears on the screen. Ignore the "slide to power off" option that might come up. This process generally takes about 5-15 seconds to see the logo, then about another minute or so after that for the reset to complete.
Now, as for the issue you are seeing, if the reset doesn't resolve it, it might be the same thing I have seen on other iPods. Almost all (if not all) I have seen with this problem have been when the owner unplugged the iPod from their computer before the sync process had fully completed. This seems to leave the iPod app directory structure in some "confused state". Every time I have seen this happen, I have been able to resolve the issue by deleting an app from the device, then re-downloading it using the App Store app on the iPod (while connected to a wifi network). To play it safe, I generally use a free app.
Don't ask me why, but the downloading of an app directly from the device itself seems to reset the iPod app structure and the other apps generally resume wirking properly...

Problems with iTunes opening and closing???

I cannot get iTunes to open. It shows it is running but it won't open, I can't force quit it either by right click or from force quit in the finder. So I can't open or close I tunes. I tried to restart the computer, re-installing iTunes, nothing is working any suggestions??
I find my library and double click on a song and get error code 600
mini mac Mac OS X (10.3.9)

I GOT THE SAME PROBLEM. I REPLACE THE CURRENT ITUNES LIBRARY FOR ONE FROM THE "PREVIOUS LIBRARY" FOLDER AND NOW IT WORKS FINE.

I updated my iPod Touch to 6.0.1. after much prompting. Now my music is gone! (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back on it??

I updated my iPod Touch to 6.0.1. -- after much prompting from iTunes. Now my music is GONE (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back?? I'm really bummed! Everything shows in iTunes, but it's not synching right. So glad I updated. NOT.

Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

Reg: Open and Closed Activities in DTR

Hello Guru's,
I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
And when does an Open Activity changes to Closed Activity?
And why does an Empty Open Activity gets created?
How does the Open Activities effect the Performance of the system?
In NWDS what is the significance of the Public Part and the dcdef xml files?
Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
Appreciate the Help.
Thanks & Regards,
Pramod

Dear Pramod,
Activity in general can be considered as the wrapper of your changes.
While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
Some Definitions:
Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
Open Activities
These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
Exmple:
1) Suppose you have made some modification in "File A" which is associated in Activity-1
2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
Closed Activities
These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
Example:
1) In the same example explained above assume that we now Check-in the Activity-1.
2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
3) Now the changes that were present in Activity-A are also available to other developers too.
Open Activity and Performance
1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
2) In the local file system, the meta data is stored in the .dcdef file in the _comp
subfolder.
3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
Every component (DC) is defined by a set of files, stored and versioned together with the
component in the repository.
u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
description and component type, the parent component (if there is one), a list
of child components (if there are any), a list of dependencies, links to the component
sources, and the access control list. The .dcdef file must be stored directly
in the _comp folder.
u2022 The folder _comp/def contains one file for each public part of the component,
which carries the name of the public part with the extension .pp. This file contains a list
of the development objects belonging to the public part and an access control list for
this public part.
Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
content display of the Repository Browser or with any text editor. However, this is
not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
Developer Studio.
In exceptions, you can manually repair the .dcdef or a .pp file of a component.
Note that direct manipulations are dangerous and can render a component
unusable.
I hope you will get a clear picture now.
Regards,
Shreyas Pandya

Opening and closing of year end

Dear all,
Pl what are the transaction code used for the opening and closing of year end activities. in fico module . what process we have to take for open and close the period open .
girija

hi
Year End Process
All the Month end Activities should be Carried Out.
Balance Carried Forwarded to next year(F.16)
PCA Balance Carried Forward(2KES).
Carry forward the Vendor,Customer and Asset Balances
(Unless Dep is posted for all the months the assets can not be Closed)
Copy the No Ranges to new year
Open the Next year period(OB52)
asset accounting
oaar
ajab
ajrw
material management
omsy
mmpv
Thanks & Regards
phaneendra

My Iphone 5 io6 has gone haywire!

My Music application has gone HAYWIRE!! It won't play music and just keeps jumping pages!! What can I do??!! And on top of that, I can't figure out how to get notifications back on my ESPN app... It doens't show up in Settings.
On top of all that, something must be running in the background because my battery us dead in less than 5 hours with minimal use
So sad!
Oh, and how the heck does passbook work?

christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702

Something has gone wrong with my version of pages since I did an update on 18th January

Something has gone wrong with my version of pages since I did an update on 18th January. I get an error message
"You need a newer version of Pages to open this document"

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You have a problem when opening a file with the wrong version.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

My ipad has gone black with only the Apple showing after I tried resetting , now nothing happens. Please help.

M y ipad has gone black with only the Apple logo showing afte I tried to reset. How can I restart.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

10.9 will not sleep with apps open

SO frustrating. I have to close all my apps to get the Mac Pro tower to remain in sleep mode. Otherwise it will just pop back on again. I have read and tried some of the less technical work arounds but it still does this. Suggestions? Besides going back to an older OS, I mean.

Open System Preferences > Energy Saver
Click: Restore Defaults
Restart your Mac.
Try putting the Mac to sleep with apps open.

Updating my ipad and the screen has gone black with just the logo and update bar. I cant turn it on/off

Udating my ipa and the screen has gone black with just the apple logo and an updat bar. I cant turn it on/off.

TRY THIS TRICK.... IT HAS HELPED ME SO MANY TIMES!!!
hold down the power button and the home button for about 6-8 seconds or until the screen goes black....

My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)

My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)

Hey Carolinearnold!
I have an article for you that seems to address this issue and can provide some troubleshooting steps for you:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for using the Apple Support Communities. Have a good one!
-Braden

TS3048 My wireless apple keyboard for my Imac has gone haywire.

The wireless keyboard for my iMac has gone haywire. The signal to the computer appears to be corrupted. When I turn it on it automatically fills in all the spaces in the box where I am supposed to type in my password at startup in order to complete booting up. It will not allow me to erase any of the letters to properly type in the password, but repaetedly fills in the spaces to capacity. It will also affect & turn on the audio volume & just goes mad until I turn it off when the computer returns to normal - although of course this means that I am unable to log in to access anything. Tried changing the keyboard batteries but no different. Any thoughts please??

fixed

My ipad2 has gone haywire with apps opening and closing pictures flashing on safari history messages, key board etc. I have tried rebooting it to no avail.

Similar Messages

Maybe you are looking for