My Ipad2 is asking for me to update Carrier settings

But won't let me either "update" or "not now"
moreover I can't get past this screen and it won't allow me to power off and reset.
Help please

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • When I try to open the Iphoto it keeps on asking for the software update but when I click on the software update tab, it says that all updates are up to date. I still cant open the Iphoto, what should I do?

    When I try to open the iphoto it keeps on asking for the software update, but when I click on the software update it says that all the software in the computer are up to date. I still cant open the iphoto, what should I do?

    How old is your Mac? If it's very recent you need to update via the App Store
    If you purchased at the App Store you need to update via the App Store
    Otherwise you update via Softare Update
    If you have moved iPhoto from the default location (i.e. into a Folder) then the updater won't find it. Move it back.
    If you have renamed iPhoto, the updater won't find it. Change it back.
    Regards
    TD

  • I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

    I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

    You cannot return to previous state. The update re-locked the iPhone
    to the original carrier. You must contact the original carrier to see if
    they offer unlocking and if you qualify.
    What does it say when you look at Settings=>General=>Carrier?
    Be advised that if your iPhone had previously been hacked/modified/
    jailbroken to work with other than original carrier, it may be impossible
    for the original carrier to unlock it properly.

  • My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
    Very frustrating, hope someone else has some ideas!
    PS My MacBook was about same age, and "expired" in exactly the same way as yours.

  • IPad browser showing outdated browser and asking for internet explorer updation . dont know what to do.?

    iPad browser showing outdated browser and asking for internet explorer updation . dont know what to do.?

    It's coming when I try to open yahoo.not able to open yahoo.now how can that be outdated? It's opening fine in my laptop, problem only in iPad mini. Can anyone help?

  • My imac hasn't downloaded up to date versions of Mac OS X version 10.6, when I ask for a software update it says my software is up to date but i am running v10.5.8

    my imac hasn't downloaded up to date versions of Mac OS X version 10.6, when I ask for a software update it says my software is up to date but i am running v10.5.8

    v10.6 isn't an update, it's an upgrade. You must purchase v10.6 / Snow Leopard.
    Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)

  • Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

    Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password. 
    Any DEFAULT Password so that i can unlock the settings menu.

    That's quite odd, just repeat the update process
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • What does "update carrier settings" Mean?  Settings for what?

    What does "update carrier settings" Mean?  Settings for what?

    It means just what it says. Carrier settings are the settings the carrier installs on the phone to connect it properly to their network. Periodically, carriers push updates to those settings. You should accept them.

  • HT201270 What's the benefit of updating carrier settings?

    I received a notification to update carrier settings on my iPhone 5. But I am not able to find the benefits of updating my iOS with this new update.

    Carrier updates are sometimes issued to reslove issues the phone may be experiencing. Why don't you contact your carrier and ask what this update is all about.

  • Update carrier settings

    I synced my phone over the weekend and got a message about "update carrier settings" which I believe relates to cell service interface.
    Searching the forum here, there seems to be a number of posts about this starting early Feb on the East coast, and including Australia and parts of Europe; none seemed to have any concrete resolution. Some posts say performance is much worse after, some say much better. I'm in Southern California, could be something AT&T didn't roll out there till recently?
    Since updating mine, I get "No Service" in places where things used to be fine, like my home, and side by side with my AT&T 3G Blackberry (from my employer - I wouldn't choose that beast) the iPhone may show 2-3 bars less signal than the crack-berry. Not scientific, I know, but if the 'berry only has 2, the iPhone is dead in the water.
    Anyone else in SoCal seeing this? Any tips on what to do about my perceived problem?
    Thanks!

    Well, pragmatically, the update correlated to service problems, but after 2 hard resets, phone service seems to be back to its usual well-behaved self, if not even better than before. Could be coincidence, could be the installer didn't clean up after itself, but all is good now.
    Thanks for the link to the kb article.

  • 'update carrier settings' after iTunes update

    I'm not sure if this is an issue with the iPhone or iTunes, but after the recent iTunes update, there is a prompt "Update carrier settings" which always pops out even though I already installed it and sync'ed my phone.     

    This is being discussed at Apple Support Communities -- iTunes 10.5.1.42 Bug - Repeated Update Carrier Settings Prompts on syncing with iTunes and on Whirlpool. It seems it particularly relates to Optus and Virgin Mobile. There is no fix yet.

  • After ios 8 update ipad2 is asking for a passcode

    Posting for my wife, since she's given up and gone to bed.  Yes, I've read all the lovely information on what to do if you've forgotten your passcode.  Here's the problem; she's never used one.  Ever.  She was working on her ipad earlier this evening, updated, and is now locked out because she can't enter a passcode.  After repeatedly locking the thing up entering every conceivable 4-digit number either of us would have used had we used one (even tried 0000) we are now the proud owners of a very expensive paperweight.
    A follow-up, as I already know what the first responses will be.  She does not have a backup as we've never figured out how to have iTunes allow one computer to be authorized for two accounts.  I assumed she was backing up to iCloud but apparently not.  What, if any, information would she be able to recover if she had to completely reset?  All of her business data is on the pad; contacts, appointment calender, the works.  Do contacts  and calender get saved to iCloud if you don't use it to backup the device?  If we can get that much at least she can start over, though I suspect it won't be on an iPad.  I wasn't aware she knew some of the words she was using on her way up the stairs.
    Just to weed out a couple of other probable comments, she does not use Find my device, has never had to enter a passcode on her lockscreen (just a swipe) before, and installed the update over WiFi.  I have not updated any of my devices and won't be until I know what happened with hers, so I'm not sure what the process is or where a code might have been accidentally entered.  She swears she didn't enter any codes during the update, but I am of the "believe but verify" camp when computers are involved.
    I have a pretty good idea the answer is going to be "You're SOL, reset or chuck it" but I hold onto a thin thread of hope.

    At what stage is it asking for a passcode?
    The reason I ask is that during the upgrade process, the upgrade will ask you for a passcode if you do not already have one set; you have to explicitly tell it not to add a passcode if you didn't have one set.
    Is it possible that at that stage of the upgrade, your wife just entered four digits assuming it was asking her for a prior passcode, and now the device is using those digits as a passcode?

  • When updating to IOS5 restore did not complete and now it is asking for a password to carry on restoring back up and I can't remember password! Would appreciate any help?

    Whilst updating to IOS5 on my iphone 4 it was interrupted whilst restoring the contents of my iphone!!!  Now when I try and restore it asks for a password to unlock my iphone backups - I have tried several but it states password is incorrect and accordingly I cannot restore backups and have lost loads of important information!!
    I would really appreciate your suggestions on what to do.
    Many thanks

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • IOS 6 keeps asking for password to update apps when it shouldn't.  Is it my phone?

    Isn't updating apps supposed to not require an iTunes password anymore in iOS 6?  I thought that was the case, but my iPhone 4 keeps asking for one when there is an update available.  Does anybody know what to do besides restoring?  Anyone else having similar issues?

    I have a hunch that, for me, the issue is because I have two different accounts synced.  I have my parent's account for the App Store and my personal account linked to iCloud and all those services.  I've noticed that when I update apps, I would sometimes have to log out of one and into the other because one app might be on one account and not the other.  I'll get around to moving everything to one account sooner or later, but it isn't an immediate issue to me.  Just a minor inconvenience.

  • Premiere Elements 9 asking for a driver update that has been done-not displaying video

    I have Premier elements 9 that has worked perfectly well for years, which recently has been giving me a message pop-up box saying that the Intel series 4 expresschipset display driver needs to be updated.  I have gone to Intel's site and run their update diagnostic tool and updated this driver, and vefified that it was updated.  I restarted the computer, un-installed and re-installed Premier - it still asks for the update and doesn't display any video, rendering it essentially useless.  Any suggestions?  I only heaviely use the program about once, twice a year...I don't want to be forced to update just because it is mis-behaving, please & thank you

    Debra888
    Yes the BadDrivers.txt file does exist for Premiere Elements 9.0/9.0.1 running on Windows 7 64 bit when you use the following instructions specific to what you have
    Local Disk C
    Program Data
    Adobe
    Premiere Elements
    9.0
    and in the 9.0 Folder is the BadDrivers.txt file that you delete. Please be sure to have Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited. After you open a Premiere Elements project, the program will generate at new BadDrivers.txt file and hopefully your issue is gone.
    The rationale behind the delete of the BadDrivers.txt file can be found in post 10 of this older thread.
    http://forums.adobe.com/thread/732067
    That file has been a life saver for many - even those with versions later than 9.
    Please let us know if that worked for you.
    Thank you.
    ATR

Maybe you are looking for

  • How to create a Query iView based on user's parameter?

    Hello, I've created a Query iView which depends on a Costumize parameter that the user enters - On stage 5 of the wizard I've entered a customize parameter on a certain field and called it "user_param". The wizard entered the Query: WHERE... = {$user

  • Has anyone ever had a USB port on their Macbook Pro suddenly go dead?

    I was just wondering whether anyone using a MAcbook Pro Retina has suddenly had one of their USB ports die on them? My one port does not seem to recongise any peripheral hardware I attach to the port and I am confused why this should have happened. A

  • Lightroom 6 serial number does not work.

    After buying the upgrade from Lightroom 5 to 6 and after installing I am asked for the serial number. When using the serial number received from the e-mail confirmation I receive the message that it cannot be validated?

  • CC 2014 error

    Installed program on windows 7 64 bit. Program opens and shuts down says windows will notify me of solution, Graphics driver is current, Uninstalled and reinstalled, still same issue.

  • Does it Pay to be Loyal

    My telephone line was installed nearly 40 years ago by Post Office Telephones (original name for BT), and since that time has only been replaced once, if my failing memory is correct.  We have always paid our bills when due, and I cannot remember a t