My IPAD2 is failing to restart after 10 seconds
What happened : after full recharge following a full discharge, IPAD cannot restart, reboots after 10 seconds on and on and on
I have rebooted it once using advice taken here, and was able to restore on itumes , but then got worse with reboot after 10 seconds
I had noticed this a few days before where after full discharge, it had needed long time before stabilizing, with reboot period
I s it because of battery or because of OS?
I am desperate, one month since I bought it!
Thnks for help
If you have restored it - as a brand new device - and the problem continues - take to an Apple Store and let them look at it. Or call Apple. You get 90 days of free phone support as well and you are well within that time frame.
Let them sort it out for you.
http://www.apple.com/support/ipad/contact/
Similar Messages
-
IPad2 charger stop to work after the second charging
My iPad2 charger doesn't work after the second charging. In local resseler didn't want to change with new one. What I have to do to use my new iPad2? I have iPad2 30 days but I can not use it.
If, as you say, the local reseller is not being helpful... Then Contact Apple.
Apple Contact USA
http://www.apple.com/contact/
Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57 -
Iphone keep restarting after 60 seconds
I need help for iphone keep restarting after 60 seconds, when I update ios 5.0.1 (9A405), how to overcome these problems
Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it back to factory settings would be the next step:
Use iTunes to restore your iOS device to factory settings - Apple Support -
I use 1 Icloud account with 2 devise but the other devise arrest out my devise throue find my iphone, than my devise was not able to connect to itune anymore. My devise still can swich on but it always restart after afew seconds. So can it fix ?
Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh -
Iphone 4s fails to restart after installing ios 5.1 & then restoring from backup ?
I have restored My Iphone 4s to Os 5.1 Yesterday ... every thing went fine ..... at the time of restoring it from my previous backup ........ iphone fails to restart ..... it is in continous loop of apple logo and busy icon thereafter .. can anybody help ????
In that case, if everything else has failed, you can restore your iPhone by putting it in to DFU mode.
Follow the steps precisely.
1) Connect your phone to computer. Open iTunes (if it doesn't open automatically).
2) Turn your phone off. Turn off the device by holding down the sleep/power button in the top right corner and Home button at the same time. A red slider will appear. Slide it to the right to turn off the device. Alternatively, keep holding both buttons even after the slider appears and the device will turn off. Let go of the buttons when the device powers down.
3) Put iPhone into DFU mode. Hold down both the top (sleep/wake) and home buttons for exactly 10 seconds, then release the top (sleep/wake) button but keep holding the home button until iTunes displays a message stating that a phone in recovery mode has been discovered. Let go of the Home button.
4) Device screen is Black. If your device's screen is black, you are in DFU Mode. It may appear that the device is turned off, but it's not. If your phone displays anything, you are not in DFU mode.
5) Restore. Press the restore button and allow the phone to complete the restoration data. After it is done, select setup as a new phone. (Preferable)
Restore your backup (optional). Next, you can restore the phone again in the normal fashion (not DFU mode) using the most recent backup rather than setting up as a new phone. However, this may cause the original problem to return in some cases. If the problem returns, follow steps 1-5 again and setup as new. Do not restore from your backup afterwards. -
Macbook pro failing to restart after new update
After trying to install the new update my MacBook pro fails to restart, its stuck on the Apple logo and then the screen goes black, it wont load in safe mode either. Apple support on the phone tells me that its a coincidence and that the display is shot?
On the bottom of your MBPis the serial number. Enter it here and post back the model and year information:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Ciao. -
Ipod Classic pauses then restarts after two seconds
I have Ipod Clasic 160 - recently it has started pausing then restarting within a second or two. It is mainly (but not exclusively) happening on lossless tracks. I have seen this has come before on teh forum - but not a definitive fix. I've tried the 5 Rs. Any ideas?
Bump.
-
Windows failed to restart after auto update
Hi I have a dual boot machine with Windows 8.1 & Windows XP. The Windows 8.1 OS was itself an upgrade of Windows 8.0 . Everything was working well till last week.
Last weekend 14th Feb, Windows 8.1 wanted to install some updates while shutting down. It installed about 14 updates and shut down promising to restart soon. After restarting, Windows 8.1 never booted. I waited for around 20 minutes and them manually restarted
the machine. This time I selected Windows XP. Windows XP started, but in the process fixed something on the file structure by running chkdisk, while starting.
Later a friend told me that he'd similar issues of his computer not starting after the patch for a long time. But ultimately it did after about half an hour. I tried to boot Windows 8.1 again, leaving it no for an hour. But it was a vain effort.
I tried to repair my machine by booting with the Windows 8.0 setup disk. But this also failed saying some partitions are locked.
Can you please tell me what are the options available to me to revive my machine.Here is the forum for you.
-- pa -
AEBS fails to restart after having been configured
I want to use Airtunes and have successfully done for months. But my AEBS is now becoming highly erratic.
After hard reset, my AEBS can been seen by my MacBook. I can set it up fine using Airport Utility, apparently. Set it up by 'Joining another network', giving it a name etc, confirming the wish to play iTunes through it, etc. All goes fine. Once the set up is done, Airport Utility says something like 'AEBS set up is now complete. You can now close Airport Utility while the base stations restarts'; but the base station does not restart - "unknown error".
Having been able to see the base station, it suddenly then 'disappears' - neither Airport Utility nor iTunes can see it.
I have been through this loop so many times, each time hopeful because the computer can clearly see the base station, read its setting and apparently reconfigure them, but at the last step it fails.
Any ideas? Time for a new Base Station?
TimSame problem here. Was quite surprised that this has slipped through apple for so long.
Just picked up a macbook pro 17, had to do two things to make this work with 10.6.6...
1) Click on keychain_access -> System (keychain) -> IPSec Shared Secret
Click on "Access Control" tab button
select radio button: Allow all applications to access this item
2) sudo launchctl stop com.apple.racoon
sudo launchctl start com.apple.racoon
Reconnecting then worked.
IMPORTANT: I noticed that it is still flaky making connections.
It seems that doing a stop/start on racoon fixes the problem.
(I'm not convinced on the causality with this; would prefer apple folks to offer up a real solution.)
Yes.. I don't like the "allow all apps access" solution either.
Fwiw, I tried the "allow all apps access" first, which cleared out the blessed apps list. Ugh.
I suppose removing/adding the vpn again would get the list back, then configd (?) could be added.
jeff -
VCenter 6 fails to restart after IP change
I changed the vCenter 6 IP from within web client.
Since I had problems connecting to the new IP, I restarted the server via vSphere Client directly on the host using VMware Tools.
After the restart, I can't connect to vCenter any more. Trying to connect via https shows me the following error:
503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http20NamedPipeServiceSpecE:0x7f4158068bf0] _serverNamespace = / _isRedirect = false _pipeName =/var/run/vmware/vpxd-webserver-pipe)
Then I directly used the console, enabled ssh and bash and logged in there.
I tried to check the current IP settings via the script used in version 5.5 which still exists (/opt/vmware/share/vami/vami_config_net) but fails with multiple errors.
Then, I tried to reset the certificates via certificate manager (/usr/lib/vmware-vmca/bin/certificate-manager), but I could not login via SSO (seems that SSO service could also not be started).
Then, I had a look in the log files, and noticed a problem with vmware-vpxd:
VC SSL certificate does not exist, it will be generated by vpxd
This did not help either. I tried to manually start the service, with the same result.
How can I fix my vCenter?I was able to start vmware-vxpd from the CLI but still no luck
emon: unused
Checking for service rpcbind running
unknown
Checking for service sendmail: unused
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A running
/usr/sbin/FOO not installed
/bin/snmpd is not running
unknown
unknown
Checking for service sshd running
Checking for stunnel (SSL tunnel): unused
Checking for service syslog: running
Checking for service uuidd unused
running (standalone: 5311)
running (standalone: 5367)
Warning: vmci status: unimplemented
running (standalone: 5417)
VMware CIS License Service is running: PID:10693, Wrapper:STARTED, Java:STARTED
VMware Component Manager is running: PID:10134, Wrapper:STARTED, Java:STARTED
VMware ESX Agent Manager is not running.
VMware Inventory Service is not running.
VMware Message Bus Config Service is not running.
VMware ESXi dump collector is not running
VMware Performance Charts Service is not running.
Checking for /usr/bin/rbd-watchdog-linux: unused
VMware HTTP Reverse Proxy is running.
VMware Service Control Agent is running: PID:10937, Wrapper:STARTED, Java:STARTED
VMware vSphere Profile-Driven Storage Service is running: PID:18707, Wrapper:STARTED, Java:STARTED
ensure environment variables are set
Checking for VMware STS IDM Server ... running
ensure environment variables are set
Checking for service vmware-stsd running
syslog is running, PID: 11999
VMware Common Logging Service is running: PID:11339, Wrapper:STARTED, Java:STARTED
vmtoolsd is running
VGAuth daemon .
vAPI Endpoint is running: PID:11563, Wrapper:STARTED, Java:STARTED
VMware Content Library Service is running: PID:19194, Wrapper:STARTED, Java:STARTED
Last login: Wed May 13 12:29:51 UTC 2015 on pts/0
pg_ctl: server is running (PID: 12178)
/opt/vmware/vpostgres/9.3/bin/postgres "-D" "/storage/db/vpostgres"
VMware vCenter workflow manager is not running.
vmware-vpxd is running
VMware vService Manager is running: PID:27602, Wrapper:STARTED, Java:STARTED
/usr/java/jre-vmware/bin/vmware-vws is running.
Warning: vsock status: unimplemented
VMware vSphere Web Client is running: PID:27919, Wrapper:STARTED, Java:STARTED
Checking for service xinetd: unused
Checking for ypbind: -
N96 fails to restart after software update
Hello,
If just hat my N96 software updated and now he resist to restart, he doesn't give any signal at all just "Phone start-up failed.Contact the retailer". What's wrong with it? My N96 has never worked properly, my N95 was better but also not that good as I asspected.Hi troy1011
It might be worth looking at Paragraph 45 in FAQ for Nokia Software Updater here for using "Three finger reset" although it may be worth leaving battery out for 10 minutes first:http://europe.nokia.com/A4577229#faq45
Failing that it's a trip to a Nokia Care Point unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Appserver fails to restart after deploying ejb_basic_beanManaged example
I believe that I have faithfully followed the instructions in
file:///C|/weblogic/doc/examples/ejb/basic/beanManaged/index.html
describing how to build and run the example.
After editing the properties file and the appserver fails to start with
the following error:
Tue Jul 11 16:19:29 CDT 2000:<E> <EJB> Could not deploy:
'C:/weblogic/myserver/ejb_basic_beanManaged.jar': file is not a valid
jar file, or does not
contain a valid bean
weblogic.ejb.common.DeploymentException: DeploymentException opening JAR
file C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception
is:
weblogic.ejb.deployment.JarLoadException - with nested exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found]
weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boo
t.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at weblogic.utils.jars.JarLoader.<init>(JarLoader.java:42)
at weblogic.utils.jars.JarLoader.<init>(JarLoader.java:50)
at weblogic.ejb.internal.EJBJarLoader.<init>(EJBJarLoader.java:83)
at
weblogic.ejb.internal.EJBJarDeployment.setupJar(EJBJarDeployment.java,
Compiled Code)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:211)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:182)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:164)
at
weblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java:172)
at
weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:122)
at weblogic.ejb.internal.EJBJarDeployment
.<init>(EJBJarDeployment.java:112)
at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:305)
at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
Compiled Code)
at weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
--------------- nested within: ------------------
weblogic.ejb.deployment.JarLoadException - with nested exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not foun
d]
at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:313)
at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
Compiled Code)
at weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
Tue Jul 11 16:19:30 CDT 2000:<I> <EJB> 0 EJB jar files loaded,
containing 0 EJBs
Tue Jul 11 16:19:30 CDT 2000:<I> <EJB> 0 deployed, 0 failed to deploy.
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1392)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:516)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1392)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:516)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
I'm not seeing anything in the traceback that would suggest what I
screwed up. Suggestions?Please post this to the .ejb newsgroups.
mbg
In article <[email protected]>,
[email protected] says...
I believe that I have faithfully followed the instructions in
file:///C|/weblogic/doc/examples/ejb/basic/beanManaged/index.html
describing how to build and run the example.
After editing the properties file and the appserver fails to start with
the following error:
Tue Jul 11 16:19:29 CDT 2000:<E> <EJB> Could not deploy:
'C:/weblogic/myserver/ejb_basic_beanManaged.jar': file is not a valid
jar file, or does not
contain a valid bean
weblogic.ejb.common.DeploymentException: DeploymentException opening JAR
file C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception
is:
weblogic.ejb.deployment.JarLoadException - with nested exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found]
weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boo
t.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at weblogic.utils.jars.JarLoader.<init>(JarLoader.java:42)
at weblogic.utils.jars.JarLoader.<init>(JarLoader.java:50)
at weblogic.ejb.internal.EJBJarLoader.<init>(EJBJarLoader.java:83)
at
weblogic.ejb.internal.EJBJarDeployment.setupJar(EJBJarDeployment.java,
Compiled Code)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:211)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:182)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:164)
at
weblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java:172)
at
weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:122)
at weblogic.ejb.internal.EJBJarDeployment--
==================================================
NewsGroup Rant
==================================================
Rant 1.
The less info you provide about your problem means
the less we can help you. Try to look at the
problem from an external perspective and provide
all the data necessary to put your problem in
perspective. -
Mac Mini fails to restart after 10.4.5 update!
Hi,
Updated my Mac Mini to 10.4.5 this morning and restarted... now I'm getting the grey "panic" screen telling me I need to restart my computer. This can either happen virtually instantly or, as on a couple of occasions, when the OS X startup screen appears. Haven't tried anything else yet, but has anyone got any ideas before I start re-installing etc.?
Thanks in advance,
JF
Mac Mini 1.42 GHz Superdrive OS X 10.4.5 - nearlyOK... a bit further into the problem... booted to the DVD, the disk did need both a Repair and Permissions Repair.
At this point I re-verified everything, half way through the permissions verification, the same thing happened - now this is starting to point to a hardware issue.
So far I've had more luck, getting right into a full re-boot before the same thing happens.
At the moment I've started creating a disk image to an external firewire drive to make sure I can save everything, but I'm not even sure it'll finish that!!!
No problems whatsoever before the 10.4.5 update.
Any further ideas??
Is it possible that there's been a Bluetooth firmware update that may have snarled things up?
Thanks
JF -
Ipod stops on some songs then restarts after 3 seconds?
Hi, im having a problem with my ipod, during a song the ipod sound fails, like its on pause, then it re starts again after a few seconds, does anyone know what the problem is?, ive already re set it a couple of time.
cheers timHi, tell us more about the file format of the concerned audio files.
If it is big and not much compressed, and the iPod can't buffer the whole thing in its RAM, some lags can be heared, (IE: a 30min Aiff).
Not experienced it yet on my 5thGen, but on my 10GB FW, with a ~4h Aiff. -
I-pod restarts after 30 seconds
After Disconnecting my ipod from my computer after the computer said ok to disconnect, i noticed that my i-pod still said do not disconnect and had become frozen, so i preformed a hard boot, now it will restart about every 30-45 seconds i have tried charging it, letting the battery drain and then charging it, and reloading the software but my comp will detect it however i-tunes or the i-pod updater will not detect it. I am working overseas on a military bases so i cannot take it to a store to have fixed and apple will not do mail service to the military addresses over here, anyone have some ideas
It sounds like your headphones are plugged in all the way. Make sure that the you cannot see any silver from the headphone's plug still showing. You should hear a sort of clicking/popping sound indicating that your headphones have been fully seated.
If that isn't the case, check the headphone jack for debris or damage.
B-rock
Maybe you are looking for
-
This may be a dumb question, but i just got an ipod nano and i need help. i down loaded White and Nerdy the music video, and it's in my itunes library thingy, but its not on my ipod. Is it possible to get it htere. I see a play list on my ipod named
-
How do I not automatically download photos in Apple Mail?
How do I not autmatically download photos when I open Apple Mail. I lve on a boat and internet by the satellite gets expensive. I would like to know how to turn off automatic photo downloads.
-
What happended to the Solaris Crash Analysis Tool 4.2 for Solaris 10?
What happended to the Solaris Crash Analysis Tool 4.2 for Solaris 10? I'm trying to debug a kernel panic under Solaris 10 on sparcv9. I tried the SUNWscat 4.1 package but it core dumps on Solaris 10. I found a blog entry that described the problem an
-
TS4002 iOS 6.0.1 issues
i completely lost access to mail after installing iOS 6.0.1. It won't even open now.
-
Do third party replacement tips fit on the apple in ear headphones? I prefer foam tips as they block out much more sound, but I'm not sure if Apple use the standard fitting for headphone tips!?!?!?!