My iPad2 is getting hang/frozen.

My ipad2 is getting hang/frozen in between & i can't do anything. None of the button works. Even the shutdown button dosen't work. I have to left ipad2 for few hrs and after that it becomes normal. Dose anyone is facing this problem? Is this iPad2 is faulty? My iPad2 software is also updated to latest version 4.3.3(8J2).
Priten

Hi,
Yes i found a solution to bring the frozen ipad into normal mode.
Please press Power and frong center Home button at the same time for few second and release it. This will restart the ipad2 successfully regardless of it's frozen. After this i upgraded my Garageband app with latest version and i never faced the same problem again.
Hope this will solve your proble too.

Similar Messages

  • My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.

    My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.
    I have an iPad 2and have not had any trouble until I up dated my os. I have a pc with win 7.  I do not sync since I have so much music on my computer. I synced my apps during the back up but I had to manually reload my music and videos. Since then I turned off all syncs.
    Since I have to load all my movies on this has been happening. I get through about 4 movies then it will hang up. I eventually get an error message that it cannot load this movie. I then attempts to close out. This seems to hang. When I attempt to eject the iPad it attempts to sync and that never finishes. I pull the plug and that stops the sync but I have to restart the computer before I plug back in the iPad or it will not recognize it or it will attempt to finish the sync which never ends. It sometimes hangs on something with safari and site protection.
    After I restart my computer I can put in 4 or so movies, including the one it hung on before, but it always hangs up again. Any suggestions?

    I am having an almost identical problem and hoped that iOS 6 and the new iTunes would fix it.  Regrettably, I again got 3 movies synced last night before iTunes locked up and gave me the xxxx cannot be synced "because the file cannot be written" message.  Same deal with iTunes hanging on "finishing sync" after that and me having to remove the iPad from the cable to get things to come back to life on the PC (Win 7 64 bit).
    I've also done a factory restore followed by a restore from backup and have the same problem. 

  • Ipad2 touch screen has frozen and none of the apps will open. I can't do a shut down to reboot?

    My Ipad2 touch screen has frozen and none of the apps will open. I can't do a shut down to reboot?

    Sorry, darned auto correct. Sleep and home. The home is the button on the front of your iPad. The sleep button is also the power down button. It's on the upper right edge of your iPad.
    My apologies for the typo. My keyboard is charging and the onscreen keyboard and I don't get along well.

  • Crystal reports gets Hang

    Dear Friends,
    We are using AR invoice ,QTN, Del.Challan prints outs thr' Crystal report.
    When we open it for taking prints ,its gets open but after  that system gets HANG.
    Then up to making END TASK ,it remain as it is.
    IS this problem of Crystal reports , or any solution is there for solve this.?
    Regards.
    Mahesh.

    Check weather the shared folder where the rpt file is kept is reachable
    set the rpt file path correctly
    is it running correctly in server or any other client?
    is it running directly in crystal report?
    Thanks,
    Krish

  • Berkeley  DB JE is getting hanged while calling environment sync method.

    Hi,
    I am developing an application in Java and I am using JE edition of Berkeley. I am facing an issue, during shutdown operation I am calling syn method of EntityStore class and Environment class.
    The EntityStore.sync() is getting completed but during executing of Environment.sync() the control is not coming out of this statement. Below is the code that I am using to perform sync operation.
    if (myEnv != null) {
    try {
    entityStore.sync(); //Calling sync method of Entity Store Class.
    log.error("Finished Syncing of Entity Store");
    myEnv.sync(); // Calling Sync method of Environment Class. Control is not coming out of this sync call.
    log.error("Finished Syncing of Environment");
    } catch (DatabaseException dbe) {
    log.error("DataBase exception duing close operation ",dbe);
    } catch (IllegalStateException ie) {
    logger.fatal("Cursor not closed: ", ie);
    During my unit testing I was changing system date and perfoming some db operation. While I during down the application the the above code gets executed but the system is getting hanged and control is not coming out of Environment sync method call. Can some one tell why the sync is causing the system to hang.
    Thanks in advance.

    Hello,
    You did not mention the version of BDB JE. In any case for BDB JE questions the correct forum is at:
    Berkeley DB Java Edition
    Thanks,
    Sandra

  • Start BI Services getting hang in obiee 11g

    Hi Experts,
    when I start the BI Service in obiee 11g in getting Hang, how could I resolve this.
    SVR_GRP =
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=512m -XX:-UseSSE42Intr
    insics
    WLS Start Mode=Production
    CLASSPATH=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar
    ;D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblog
    ic_patch.jar;D:\Oracle\MIDDLE~1\patch_ocp353\profiles\default\sys_manifest_class
    path\weblogic_patch.jar;C:\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;D:\Oracle\MID
    DLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server
    \lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10
    .3.3.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MI
    DDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_
    1/lib/ant-contrib.jar;D:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar
    ;D:\Oracle\Middleware\oracle_common\modules\oracle.dms_11.1.1\dms.jar;D:\Oracle\
    Middleware\oracle_common\modules\oracle.jmx_11.1.1\jmxframework.jar;D:\Oracle\Mi
    ddleware\oracle_common\modules\oracle.jmx_11.1.1\jmxspi.jar;D:\Oracle\Middleware
    \oracle_common\modules\oracle.odl_11.1.1\ojdl.jar;D:\Oracle\MIDDLE~1\ORACLE~1\so
    a\modules\commons-cli-1.1.jar;D:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\oracle.soa
    .mgmt_11.1.1\soa-infra-mgmt.jar;D:\Oracle\Middleware\Oracle_BI1\common\jlib\11.1
    .2.0\ctg.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Or
    acle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Oracle\MIDDLE~1\WLS
    ERV~1.3\server\lib\xqrl.jar
    PATH=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;D:\Oracle\MIDDLE~1
    \patch_ocp353\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\nativ
    e\win\x64;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\OR
    GAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\JDK16~1.0_2\b
    in;D:\app\product\11.2.0\dbhome_1\bin;C:\Program Files (x86)\Dell\SysMgt\RAC5;C:
    \Program Files (x86)\Dell\SysMgt\oma\bin;C:\Program Files (x86)\Dell\SysMgt\idra
    c;C:\Program Files\Intel\DMIX;D:\Oracle\Middleware\Oracle_BI1\bin;D:\Oracle\Midd
    leware\Oracle_BI1\opmn\bin;D:\Oracle\Middleware\Oracle_BI1\opmn\lib;D:\Oracle\Mi
    ddleware\Oracle_BI1\perl\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64
    \oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
    Java HotSpot(TM) 64-Bit Server VM (build 17.0-b17, mixed mode)
    Starting WLS with line:
    C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -server -Xms256m -Xmx512m -XX:MaxPermSi
    ze=512m -XX:-UseSSE42Intrinsics -Dweblogic.Name=AdminServer -Djava.security.poli
    cy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.Producti
    onModeEnabled=true -Doracle.home=D:\Oracle\Middleware\Oracle_BI1 -da -Dplatform
    .home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\ser
    ver -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=D:\Oracl
    e\MIDDLE~1\USER_P~1\domains\BIFOUN~1 -Dcommon.components.home=D:\Oracle\MIDDLE~1
    \ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commo
    ns.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\module
    s\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=D:\Oracle\MID
    DLE~1\USER_P~1\domains\BIFOUN~1\config\FMWCON~1 -Doracle.server.config.dir=D:\Or
    acle\MIDDLE~1\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\servers\AdminServer -Dor
    acle.security.jps.config=D:\Oracle\MIDDLE~1\USER_P~1\domains\BIFOUN~1\config\fmw
    config\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dig
    f.arisidbeans.carmlloc=D:\Oracle\MIDDLE~1\USER_P~1\domains\BIFOUN~1\config\FMWCO
    N~1\carml -Digf.arisidstack.home=D:\Oracle\MIDDLE~1\USER_P~1\domains\BIFOUN~1\c
    onfig\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\Oracle\MIDDL
    E~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\o
    racle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Doracle.biee.sear
    ch.bisearchproperties=D:\Oracle\Middleware\Oracle_BI1\bifoundation\jee\BISearchC
    onfig.properties -Dweblogic.management.clearTextCredentialAccessEnabled=true -Do
    racle.notification.filewatching.interval=2000 -Dweblogic.security.SSL.ignoreHost
    nameVerification=true -DEPM_ORACLE_HOME=D:\Oracle\Middleware\Oracle_BI1 -Doracle
    .ecsf.crawl.mode.debug=true -Doracle.ecsf.security.service=oracle.biee.search.se
    curity.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee.sea
    rch.services.BISearchServiceConfiguration -Dxdo.server.config.dir=D:\Oracle\Midd
    leware\user_projects\domains\bifoundation_domain\config\bipublisher -DXDO_FONT_D
    IR=D:\Oracle\Middleware\Oracle_BI1\common\fonts -Dorg.eclipse.emf.ecore.EPackag
    e.Registry.INSTANCE=com.sigmadynamics.emf.util.SDEMFRegistry -Dweblogic.wsee.ski
    p.async.response=true -Drtd.instanceName=RTD_AdminServer -Dem.oracle.home=D:\Ora
    cle\Middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.disc
    over=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToCon
    sole=false -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default
    \sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_ocp353\profiles\default\syse
    xt_manifest_classpath -Dweblogic.management.username=Administrator -Dweblogic.ma
    nagement.password=System12 weblogic.Server
    <Mar 28, 2011 2:26:26 AM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting Web
    Logic Server with Java HotSpot(TM) 64-Bit Server VM Version 17.0-b17 from Sun Mi
    crosystems Inc.>
    <Mar 28, 2011 2:26:26 AM PDT> <Info> <Management> <BEA-141107> <Version: WebLogi
    c Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
    <Mar 28, 2011 2:26:29 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to STARTING>
    <Mar 28, 2011 2:26:29 AM PDT> <Info> <WorkManager> <BEA-002900> <Initializing se
    lf-tuning thread pool>
    <Mar 28, 2011 2:26:29 AM PDT> <Notice> <Log Management> <BEA-170019> <The server
    log file D:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers
    \AdminServer\logs\AdminServer.log is opened. All server side log events will be
    written to this file.>
    Log file shows
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <WebLogicServer> <XTDBS1> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1301304389287> <BEA-000000> <WebLogic Server "AdminServer" version:
    WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Notice> <Log Management> <XTDBS1> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1301304389412> <BEA-170019> <The server log file D:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Log Management> <XTDBS1> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1301304389427> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Diagnostics> <XTDBS1> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389521> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "http" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "https" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389630> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389646> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389646> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389646> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <RJVM> <XTDBS1> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389677> <BEA-000570> <Network Configuration for Channel "AdminServer"
    Listen Address          :7001
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Server> <XTDBS1> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389724> <BEA-002609> <Channel Service initialized.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Socket> <XTDBS1> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389739> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
    >
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Socket> <XTDBS1> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389762> <BEA-000436> <Allocating 3 reader threads.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <Socket> <XTDBS1> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389778> <BEA-000446> <Native IO Enabled.>
    ####<Mar 28, 2011 2:26:29 AM PDT> <Info> <IIOP> <XTDBS1> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1301304389918> <BEA-002014> <IIOP subsystem enabled.>
    Thanks,
    Balaa...

    balaa,
    can you help in starting the bi services?
    Thanks

  • Whenever i tried save as or save PDF created document in Acrobat std 11 (11.0.7), Acrobat get hanged and unresponsive

    Dear Sir,
    I am using Acrobat std 11, (version 11.0.7) with windows 8 in my company. Whenever i try to save any edited or converted or combined PDF document Acrobat software become unresponsive. same issue is there with while i try to insert any new page to PDF from a file, dialog box will not open but it get hanged & become Unresponsive. Acrobat may please help in this issue.
    my PC spesifications are as follows:
    Account Detail:
       User Rights: Regular
       User Account Control: Default
       Process Integrity: Undefined
       Profile Type: None
    Acrobat Detail:
       Sandboxing: Off
       Captive Reader: No
       Multi-Reader on Desktop Support: Off
    Applications Installed:
       Office Version: Office 2010 32-bit
    Available Physical Memory: 2121868 KB
    Available Virtual Memory: 3990316 KB
    BIOS Version: DELL   - 1072009
    Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
        Version: 10.00.9200.16384 (win8_rtm.120725-1247)
        Creation Date: 2012/07/26
        Creation Time: 4:48:22 AM
    Default Mail: Microsoft Outlook
        mapi32.dll
        Version: 1.0.2536.0 (win8_rtm.120725-1247)
    Display Detail:
       Screen Width: 1920
       Screen Height: 1080
       Number of Monitors: 1
       Number of Mouse Buttons: 3
       Has Mouse Wheel: Yes
       Has Pen Windows: No
       Double Byte Character Set: No
       Has Input Method Editor: Yes
       Inside Screen Reader: No
    Graphics Card: Intel(R) HD Graphics (Microsoft Corporation - WDDM 1.2)
        Version: 9.17.10.2768
        Check: Not Supported
    Installed Acrobat: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
        Version: 11.0.07.79
        Creation Date: 2014/05/08
        Creation Time: 7:19:08 PM
    Installed Acrobat: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
        Version: 11.0.0.379
        Creation Date: 2012/09/24
        Creation Time: 9:13:34 AM
    Locale: English (United States)
    Monitor:
        Name: Intel(R) HD Graphics (Microsoft Corporation - WDDM 1.2)
        Resolution: 1920 x 1080 x 60
        Bits per pixel: 32
    OS Manufacturer: Microsoft Corporation
    OS Name: Microsoft Windows Vista
    OS Version: 6.2.9200 
    Page File Space: 4194303 KB
    Processor: Intel64 Family 6 Model 58 Stepping 9  GenuineIntel  ~2893  Mhz
    Session Detail:
       Boot Type: Normal
       Is Shutting Down: No
       Network: Available
       Inside Citrix: No
       Inside VMWare: No
       Remote Session: No
       Remote Control: No
    System Name: BRDROC00DT130
    Temporary Directory: C:\Users\123660\AppData\Local\Temp\
    Time Zone: India Standard Time
    Total Physical Memory: 4066528 KB
    Total Virtual Memory: 4194176 KB
    User Name: 123660
    Windows Detail:
       Tablet PC: No
       Starter Edition: No
       Media Center Edition: No
       Slow Machine: No
    Windows Directory: C:\Windows
    Regards,
    Dharmender

    Hi Dharmender ,
    Did you try to repair your Acrobat once ?If not please try the same and check if that helps you out .
    Launch Acrobat >Navigate to Help >Repair Acrobat Installation .
    Do you get any error message or any prompts when it hangs and become unresponsive ?
    Does this happen with any specific PDF or all the PDF'?
    Also you could try to uninstall Acrobat once and they re install it if the above step does not work .
    Please restart your machine once as well.
    Regards
    Sukrit Dhingra

  • When i click on itunes on my ipad2 i get the error ..'cannot connect to itunes store'...i'm able to access podcasts and itunesU but not itunes store. This is very strange as i can access app's store

    when i click on itunes on my ipad2 i get the error ..'cannot connect to itunes'...I'm able to access podcasts and itunes U but not itunes store..my apps store and safari are also working perfectly but don't know whats the issue with i tunes store...i use an airtel broadband connection through a wifi router..pls help

    I was having this problem. The settings on my wireless router was set to hide my IP address so it wouldn't connect. When I changed that, I connected no problem. While this is annoying since I don't want my IP address to be out there, I just switch my router when I need to connect to the App/iTunes Store. Hope this helps. It worked for me.

  • My iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off

    my iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off can anyone please help ......

    hi i m currently in pakistan and there is no apple store here . i will b back to australia after 2 weeks i was wondering if thei can b any fix as i have all my contacts and everything else in my mobile

  • In safari, On my Ipad2,I get the error message, "too may redirects" and the page won't load. Anyone with advice? I have cleared the cache, cookies, and history and restarted.

    In safari, on my Ipad2, I get the error message " too many redirects" and the page won't load. I have cleared the cache, cookies, and history and have rebooted and I still get the same problem. Any advice?

    In safari, on my Ipad2, I get the error message " too many redirects" and the page won't load. I have cleared the cache, cookies, and history and have rebooted and I still get the same problem. Any advice?

  • Owb Process Flow getting hanged/stuck .

    Hi,
    Problem description  :-  We have designed a Process Flow in OWB our project. The Process Flow is scheduled to run at 12.00 AM daily Dutch timings.
    We have been facing a problem for around 3 months wherein the process gets hanged/stuck in between without giving any specific error message.
    There isn't any kind of locking happening in the background as well. The OWB log gives the message "Forcibly deactivating execution with audit ID 1660235 ",
    During the time at which the process hangs  The process gets hanged in different timings in different sub processes(not in a particular process, so no specific pattern has been observed.)
    To complete the process flow, we need to kill the process and rerun it again. When reran, it runs perfectly without any error.
    The above error message appears in the log only when a process hangs. There is no such kind of logging during a successful execution.
    Can you please let us know when and why does this message appear in the OWB log file.
    Is there any specific kind of settings or configuration parameters that needs to be set to resolve this.
    Regards,
    Rosy Mukherjee

    You might want to check to see if you have anything "parallel" running
    We recently had an issue with one of our mappings where one day it decided to just stop working and "freeze"
    Our DBA found that we had a Oracle hint for "Parallel" in the code and removed it. After that the mapping ran fine.
    Best of luck

  • CMS gets hang when configure TACACS

    Hi
    I have stack of 2950 switches. I have configure tacacs for login security purpose. but i am facing problem when i open CMS web interface. I am succussfully get authenticated. but its get hang when Discovering network information dialog box comes. If you close that session and reopen again then CMS working fine. Problem is that when I configure Network Access restriction group device for specific user. Then it halt at Discovering Network information. I am using Cisco ACS 3.0. Following my switch config.
    aaa new-model
    aaa authentication login default group tacacs+ local
    aaa authentication enable default group tacacs+ enable
    aaa authorization exec default group tacacs+ if-authenticated
    aaa authorization commands 1 default group tacacs+ if-authenticated
    aaa authorization commands 15 default group tacacs+ if-authenticated.
    The only problem is CMS application getting hang with tacacs configuration . My IOS ver is 12.1(14)EA1A. Please help its very urgent.

    I could not find any bugs related to the issue you are describing. There was one problem where the username/password prompt was appearing again and again which had to do with misconfigurations. Do let me know if you find a solution.

  • Hyperion System 9.3.1 Services are getting hang... on AIX box.

    Dear All,
    We have installed & configured Hyperion System 9.3.1 on IBM AIX 5.3 ML-6, 6 dual core CPU & 24GB RAM. Repository database is Oracle 10gR2.
    We have scheduled approx 300 Interactive Reporting Jobs in Workspace which has been associated with external trigger events. Once these jobs get executed their output has been imported in the various folders on Workspace.
    We are getting following errors in <HYPERION_HOME>/log/BIPLUS/ server_messages_IRJobService.log file when these jobs get executed:
    <message><![CDATA[Out of Memory. Advice: Close other applications or windows and try again.]]></message>
    And
    In <HYPERION_HOME>/BIPLUS/logs/ 0_bijobs_stderr.txt getting bellow error:
    *** PROCESS OUT OF MEMORY, EXITING ***
    *** PROCESS OUT OF MEMORY, EXITING ***
    SIGNAL SIGABRT Generated at Wed May 21 16:19:29 2008
    by thread 1287
    +++PARALLEL TOOLS CONSORTIUM LIGHTWEIGHT COREFILE FORMAT version 1.0
    +++LCB 1.0 Wed May 21 16:19:29 2008 Generated by IBM AIX 5.3
    +++ID Node 0 Process 25490 Thread 7
    ***FAULT "SIGABRT - Abort"
    +++STACK
    abort : 0x000000e8
    # At location 0xd015f47c but procedure information unavailable.
    write_string__16IT_CDR_OutStreamFPCc : 0x000001c0
    marshal_request__29IT_GIOP_ClientInterceptorImplFR16IT_CDR_OutStreamPQ2_10IT_Binding13ClientRequestUlT3sPQ2_6IT_IOR16ObjectKeyProfile21IT_GIOP_ResponseFlags : 0
    After this Hyperion Services are getting hang. In Workspace - View Job Status – showing that Jobs are executing.
    Any help would be highly appreciated.
    Regards,
    Manmohan Sharma

    The reason they run quicker the subsequent times, is because the data has already been cached in the system.
    You could try the usual tricks to speed the report up:
    - move items into POV
    - have children and parent in the same row
    - arrange dimensions in inverse outline order
    - remove excessive formatting
    - push report calculations back to the data source
    We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
    Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made.

  • My ipad one sometimes stop responding ,like the apps get hanged and return back to homescreen. how to get rid of this bummer

    my ipad sometimes gets hanged while in apps . but when it gets hanged , its comes to homescreen and stops responding
    how to get rid of this problem

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Then reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Weblogic portal is getting hanged after a regular interval

    Hi,
    We are using WLP 8.1 SP 5 on a HP Unix environment. Our Weblogic instance is getting hanged and we need to restart the same. This problem is happing once in a 3 weeks time. From console we cheked that avilable memory for JVM heap is quite low when this happens. Below are the some of the log messages we have found in the weblogic log:
    <Jun 28, 2010 6:12:59 AM GMT> <Error> <HTTP> <BEA-101083> <Connection failure.
    java.net.SocketException: Error in poll for fd=172, revents=32
    at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:131)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
    >
    <Jun 28, 2010 6:45:14 AM GMT> <Error> <WebLogicServer> <BEA-000337> <ExecuteThread: '57' for queue: 'default' has been busy for "966" seconds working on the request "Http Reques
    t: /Xxxxx/global/docs/en/careers/Xxxxx_Power_Source.wmv", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
    ********* resources error jsp is called *******
    <Jun 28, 2010 7:55:14 AM GMT> <Error> <WebLogicServer> <BEA-000337> <ExecuteThread: '13' for queue: 'default' has been busy for "606" seconds working on the request "Http Reques
    t: /Xxxxx/global/docs/en/xxxxx/media_publications/technical_papers/xxxx.pdf", which is more than the configured time (StuckThreadMaxTime) of "600" seco
    nds.>
    ********* resources error jsp is called *******
    <Jun 28, 2010 7:46:13 AM GMT> <Error> <HTTP> <BEA-101046> <[ServletContext(id=12830383,name=xxxxxportal,context-path=)] mt:mail: Could not send message
    javax.mail.SendFailedException: No recipient addresses
    at javax.mail.Transport.send0(Transport.java:111)
    at javax.mail.Transport.send(Transport.java:81)
    at org.apache.taglibs.mailer2.BackgroundMailThread.run(BackgroundMailThread.java:65)
         ********* resources error jsp is called *******
    Any help is highly appriciated.

    Hi,
    Please find below my findings about the memory leak.
    Many (around 40 where max connection is 50) connection were created without they getting closed in a very short span of time. This caused the connection pool to be filled as rest of the connections in the connection pool were doing something else. Below is the log message:
    ####<Jul 4, 2010 12:24:01 AM GMT> <Info> <Common> <domainname.xxxxxxxx.com> <EXL> <ExecuteThread: '4' for queue: 'default'> <<anonymous>> <BEA1-39390F6683087D485CB1> <BEA-000627> <Reached maximum capacity of pool "portalPool", making "0" new resource instances instead of "1".>
    ####<Jul 4, 2010 12:24:01 AM GMT> <Info> <Common> <domainname.xxxxxxxx.com> <EXL> <ExecuteThread: '48' for queue: 'default'> <<anonymous>> <BEA1-393D0F6683087D485CB1> <BEA-000627> <Reached maximum capacity of pool "portalPool", making "0" new resource instances instead of "1".>
    ####<Jul 4, 2010 12:26:06 AM GMT> <Info> <Common> <domainname.xxxxxxxx.com> <EXL> <ExecuteThread: '45' for queue: 'default'> <<anonymous>> <BEA1-397A0F6683087D485CB1> <BEA-000627> <Reached maximum capacity of pool "portalPool", making "0" new resource instances instead of "1".>
    This caused all the threads handling request to the application hanged.
    ####<Jul 4, 2010 12:29:24 AM GMT> <Error> <WebLogicServer> <domainname.xxxxxxxx.com> <EXL> <weblogic.health.CoreHealthMonitor> <<WLS Kernel>> <> <BEA-000337> <ExecuteThread: '1' for queue: 'default' has been busy for "636" seconds working on the request "Http Request: /xxxxxxxx.portal", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
    ####<Jul 4, 2010 12:29:24 AM GMT> <Error> <WebLogicServer> <domainname.xxxxxxxx.com> <EXL> <weblogic.health.CoreHealthMonitor> <<WLS Kernel>> <> <BEA-000337> <ExecuteThread: '2' for queue: 'default' has been busy for "696" seconds working on the request "Http Request: /xxxxxxxx.portal", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
    69 of 70 threads hanged and logged this error message
    Also, other Weblogic modules (EJBs etc.) were not able to release connections due to this connection leak problem.
    <Jul 4, 2010 12:31:13 AM GMT> <Info> <EJB> <domainname.xxxxxxxx.com> <EXL> <ExecuteThread: '15' for queue: 'default'> <<anonymous>> <BEA1-38C90F6683087D485CB1> <BEA-010051> <EJB Exception occurred during invocation from home: [email protected]106df27 threw exception: javax.ejb.TransactionRolledbackLocalException: EJB Exception: ; nested exception is: javax.ejb.TransactionRolledbackLocalException: EJB Exception: ; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 502 seconds
    BEA1-38C90F6683087D485CB1
    These hanged threads and EJBs caused the memory leak in JVM heap.
    ####<Jul 4, 2010 2:00:35 AM GMT> <Error> <T3Misc> <domainname.xxxxxxxx.com> <EXL> <weblogic.time.TimeEventGenerator> <<WLS Kernel>> <> <BEA-000712> <Exception invoking Scheduled Trigger
    java.lang.OutOfMemoryError: Java heap space
    java.lang.OutOfMemoryError: Java heap space
    >
    When checked the JDBC log the below exception was found:
    SQLException: SQLState(null) vendor code(17002)
    SQLException: SQLState(null) vendor code(17002)
    java.sql.SQLException: Io exception: Broken pipe (errno:32)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
    So, what might cause this JDBC error. Is the problem at Weblogic end or the database end? It seems that the connections are hanging due to this JDBC error which is causing the connection pool to be filled up. Subsequently threads are hanging which leads to memory leak.
    Please help as this issue is reoccuring again and again!!!

Maybe you are looking for

  • Check if a point lies inside a rectangle

    Hi im making an application that displays a shape on the screen at different locations. The shape is a combination of an ellipse and a line. My problem is when i want to draw the shapes i created a method to check if the point given is contained by a

  • HPE h8-1240t does not work with upgrade graphic card

    Hi, I have a HP Pavilion HPE h8-1240t, the specs: Core i7-3770 (Ivy Bridge) (77W) 3.4 GHz 16 GB (4 x 4 GB) DDR3 PC3-10600 1 TB, 7200 rpm, SATA So  my pc came with the Radeon HD 7570 (1 GB). I just bought a GTX 750 Ti SC. I put the new graphic card on

  • Cenavt on Hold Account - Capital Goods 50% Credit

    Hi Gurus, As per PO , Basic Duty is 800.00 + 2% Cess - 16.00 + 1% Secc - 8.00, but when I Post the Excise Duty, 50% Duty is correctly posted in respective G/L Account as 40084 , but the balance 50% credit in Cenvat on Hold A/c is showing value as onl

  • VGA adapter can't handle 1920x1080@60Hz ?

    Hi, I just found this sub forum so I'm reposting my problem into the proper forum if that's ok. I bought an Air two days ago with a VGA adaptor, for use with an iiyama 24" VGA monitor. When I set the monitor to its native 1920x1080@60Hz resolution, I

  • How do I generate a report (Active Vendors -- Vendor Code)?

    Dear SAP Friends, May I ask how do I generate a report showing all active vendors with their corresponing vendor code in SAP? Thank you very much in advance, Albert