My ipad2 is hang suddenly, how to resolve it?

Hi
My ipad2 is suddenly hang. How can I resolve it? TQ

Similar Messages

How to resolve hang issue in Iphone 4s with IOS 7

how to resolve hang issue in Iphone 4s with IOS 7

Hi there ECMA IPHONE,
The article linked below provides a lot of great information and troubleshooting tips that will most likely help you resolve the issue sending emails from the specific email account on your iPhone 4s.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Ciao,
-Jason

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

Please also see Boot Camp: Set the default operating system.

I downloaded a movie to my Air, but it won't sync to my ipad2 and says it's not authorized. It's not a rental. Anyone else have this problem or know how to resolve?

I downloaded a movie to my Air, but it won't sync to my ipad2 and says it's not authorized. It's not a rental. Anyone else have this problem or know how to resolve?

I ended up having a one hour conversation with Apple Support which evolved to handing over control of my screen and then eventually having to use Terminal. I wish I could remember the command but it's probably best I don't.
One thing we looked at right away was the account name used to dowload the movie. Is it the same as the account name you have saved on your iPad. That's easy to check and would be great if that is all that's needed to correct. Good luck.
Here's also an email I got from Support that could solve your problem if it's not as difficult as my issue was.
I would like to inform you that this issue can occur if iOS (your device's operating system) on your device needs to be updated. It can also happen if the computer you're trying to sync from has not been authorized to play purchases you are trying to sync.
I suggest that you first see if updating iOS on your iPad resolves the issue. This article will walk you through the process:
Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
http://support.apple.com/kb/HT1414
If there are still purchases that won't sync to your device after you update its software, I suggest reauthorizing your computer. To do so, follow these steps:
1) Open iTunes.
2) From the Store pull-down menu at the top, choose Deauthorize Computer.
3) Enter your account name and password, then click Deauthorize.
4) Now from the Store pull-down menu at the top, choose Authorize Computer.
5) Enter your account name and password, then click Authorize.
Once your computer has been authorized, try syncing your device again. If the same issue happens, I suggest reviewing the following articles:
Some songs in iTunes won't copy to iPod
http://support.apple.com/kb/TS1420
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
http://support.apple.com/kb/TS1497
Syncing iPad, iPhone, or iPod touch with iTunes
http://support.apple.com/kb/HT1386
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
You'll also find a wide variety of helpful iPad troubleshooting tips, tutorials, and service information on this page:
http://www.apple.com/support/ipad

I installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
Regards,
Steve

My speaker in iphone 4s is not working from yesterday ..it happened suddenly while listening to songs....do anyone had this pblm and how u resolved it?

my speaker in iphone 4s is not working from yesterday ..it happened suddenly while listening to songs....do anyone had this pblm and how u resolved it?

I got this problem solved and just want to let others know what it was.
I followed ewdel1's advice and brought my phone in to have it looked at and sure enough, was told that this is a problem others have had and it was due to a faulty integrated circuit. Luckily, I was able to take this in to be looked at when I did because my 1 year warranty was about to expire in a week.
Apple replaced my 4S with a "new" phone. The replacement looks and works good as new, so happy I didn't have to go through a hassle and the replacement was very straightforward.

How to resolve 401 error in HWC SMP2.3

Hi All,
I did a login Sample with username and password. till now it is working fine but suddenly it is throwing 401 error,
Below are my logs.
20140501T145911.752|3|zalyjwtjnccw Mydata:1 -- username: supAdmin|||||3296
20140501T145911.752|3|zalyjwtjnccw Mydata:1 -- password: [xxxxxxxx]|||||3296
20140501T145912.792|1|zalyjwtjnccw Mydata:1 -- Request failed|||||3296
20140501T145912.809|1|zalyjwtjnccw Mydata:1 -- Request: <M><H></H><S>Start</S><A>submit</A><VS><V k="username_key" t="T">FATIMA</V><V k="password_key" t="T">welcome123456</V><V k="ErrorLogs" t="L" /></VS></M>|||||3296
20140501T145912.809|1|zalyjwtjnccw Mydata:1 -- ResponseHeader: {"id":"72861383ff6f468ea87f780be40791b7","cid":"8#Mydata:1","pv":"4","sig":"06bf13bf8f834f9ebc2bb2129bd8a603","loginFailed":true,"method":"searchFailed","log":"[{\"level\":5,\"code\":401,\"timestamp\":\"2014-05-01 14:59:12.773\",\"message\":\"Login Failed: user 'supAdmin'\",\"component\":\"fnduser\",\"_op\":\"C\",\"requestId\":\"72861383ff6f468ea87f780be40791b7\",\"operation\":\"search\"}]","mbo":"fnduser","app":"Mydata:1","pkg":"sample:1.0"}|||||3296
I did some r & d i got this link SyBooks Online
my connections were correct, i am able to connect the database still it is showing the same exception.
How to resolve this.
Thanks & Regards,
Sravanya.

Jitendra & Midhun,
1. I am able to login the SCC with supAdmin & 12345678 credentials.
2. Yes, i am using the admin security.
3. Yes, i am connecting the SUP server from my workspace.
4. No, i did not select the Dynamic credentials Option.
1. I created a MBO with a oracle function i.e.,
select apps.fnd_web_sec.validate_login(:uname, :pwd) from Dual1
2. Then for Uname & Pwd i created two personalization keys which are with storage type "Transient".
3. I deployed the MBO in server, that is successful.
4. Then I created a Hybrid App Designer, with two editboxes(Username & Password) and one button(Login).
5. I gave the type of Login button is OnlineRequest, selected the MBO, and checked the radio button of ObjectQuery, selected ' findall '.
6. Then i mapped the personalization keys to two editboxes(Username & Password).
7. Then i gave success screen and generated error screen.
8. Then i generated the hybrid app, it was also successful.
9. Now i am able to access my application in my Simulator with the registered device of SCC.
10. Then i gave the Username & Password, clicked on Login button, then it is throwing 401 error.
Thanks & Regards,
Sravanya.K

HT2292 My iPad is now longer appearing in iTunes and under devices it says the iPad needs "troubleshooting" - anyone have any idea how to resolve

I've never had any issues before connecting devices to iTunes, but suddenly my iPod and my iPad Mini are both not appearing in the list. When the iPad is connected to the laptop under devices it says it needs troubleshooting, however I've tried that and it doesn't resolve the issue.
I've also completely removed iTunes from the laptop and reinstalled but again, this has not resolved anything.
Any one else had this issue and any help on how to resolve would be appreciated. I need to transfer things off my iPad but currently can't!

I've never had any issues before connecting devices to iTunes, but suddenly my iPod and my iPad Mini are both not appearing in the list. When the iPad is connected to the laptop under devices it says it needs troubleshooting, however I've tried that and it doesn't resolve the issue.
I've also completely removed iTunes from the laptop and reinstalled but again, this has not resolved anything.
Any one else had this issue and any help on how to resolve would be appreciated. I need to transfer things off my iPad but currently can't!

How to resolve Library Cache Pin waits?

Hai All,
I grant a select privilage on a table to another user. Then my session hangs. after 5 minutes a message present that is 'ORA-04021: timeout occurred while waiting to lock object....' etc.
I query the v$session_wait and see a Library Cache pin wait present in my session. I copy the p1raw column from here and put into some x$ tables and v$session then I can identify one session using a application using that table. I kill that session . then my grant privilage query works..
So what is library cache pin waits.. How to identify in application...How to resolve it? it resolve in database level or application level?
Please Help..
Shiju

Most common cause of library cache pin wait event are
-- Not use binding variables in the query
-- Some one keeps modify the schema objects
library cache pin
This event manages library cache concurrency. Pinning an object causes the heaps to be loaded into memory. If a client wants to modify or examine the object, the client must acquire a pin after the lock.
Wait Time: 3 seconds (1 second for PMON)
Parameter Description
handle address Address of the object being loaded
pin address Address of the load lock being used. This is not the same thing as a latch or an enqueue, it is basically a State Object.
mode Indicates which data pieces of the object that needs to be loaded
namespace See "namespace"

Error: - ORA-12542: TNS:address already in use. How to resolve?

Hello all,
Can anyone guide me how to resolve this error. I have encountered this error for the first time!
Usually I run my batch job at every night. It generally takes 2 hours to 3 hours to complete. Till date I have not faced any problem of this kind.
I understand that there is conflict of Ports. The port that is being used by my listener, is also being shared by some other. I am not aware of that other program which may be using the port assigned to the listener.
Thanks in advance.
Himanshu

Hi,
I had the same problem today morning in my production. Listener was hanged and receved OEM alert as "Listerner Down" when i go and start the listerner its was failed then i found multiple PID created the same listerner then i went i killed both of the process and started the listener successfully.
Could you please tell me what was the exact cause.
Regards
Salai

ORA-00600 how to resolve this error?

I was working on my Oracle 9i database and 6i form server. windows 2003
my server suddenly restarted and after that oracle showing the error ORA-01033: ORACLE initialization or shutdown in progress...
I try to resolve this error through this method. I received above mentioned error. please help how to resolve this error. ORA-00600.
C:\>sqlplus
SQL*Plus: Release 9.2.0.1.0 -
Copyright (c) 1982, 2005, Oracle Corporation. All rights reserved.
Enter user-name: sys as sysdba
Enter password :[password]
Shutdown Database
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
Startup Database (force)
SQL> startup force;
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-00600: internal error code, arguments: [kcratr1_lostwrt],[],[],[]..................

There was an instance failure.
Then you did a clean shutdown using shutdown immediate
After that, was there any need for giving startup force.
Because that command starts up the database and shuts it down in abort mode, and then starts the database with an instance
recovery.
You should have tried a direct startup also before trying to attempt forceful startup.
*Startup force needs to be used with care.
For carrying out normal startup, simply typing startup will do.
Startup force is being used, when you want to refresh the already running database and facing issues like database showing errors while shutting down before starting up again.
Startup force actually, crashes the instance (just like shutdown abort) and then start your database normally. This do require instance level recovery.*
ORA-00600 are thrown when some internal errors happen. Ideally you should contact Oracle for metalink. For a first level step of troubleshooting, you can search in metalink
like what others said here.

ROLLBACK SEGMENT NEEDS RECOVERY AND HOW TO RESOLVE IT

제품 : ORACLE SERVER
작성날짜 : 1995-02-06
Subject :
This article discusses what it means when a rollback segment needs
recovery and how to resolve it.
OVERVIEW
This bulletin discusses why a rollback segment is the status of
"needs recovery", what the status means, and how to resolve it.
INTRODUCTION
Rollback segments can be monitored through the data dictionary view,
dba_rollback_segments. There is a status column that describes what state
the rollback segment is currently in. Normal states are either online or offline.
Occasionally, the status of "needs recovery" will appear.
This is considered to be a corrupted rollback segment.
When a rollback segment is in this state, bringing the rollback segment
offline or online either through the alter rollback segment command or
removing it from the rollback segments parameter in the init.ora usually has no effect.
UNDERSTANDING
A rollback segment falls into this status of needs recovery whenever
Oracle tries to roll back an uncommitted transaction in its transaction
table and fails.
Here are some examples of why a transaction may need to rollback:
1-A user may do a dml transaction and decides to issue rollback
2-A shutdown abort occurs and the database needs to do an instance recovery
in which case, Oracle has to roll back all uncommitted transactions.
When a rollback of a transaction occurs, undo must be applied to the
data block the modified row/s are in. If for whatever reason, that data
block is unavailable, the undo cannot be applied. The result is a
'corrupted' rollback segment with the status of needs recovery.
What could be some reasons a datablock is unaccessible for undo?
1-If a tablespace or a datafile is offline or missing.
2-If the object the datablock belongs to is corrupted.
3-If the datablock that is corrupt is actually in the rollback segment
itself rather than the object.
HOW TO RESOLVE IT
1-MAKE sure that all tablespaces are online and all datafiles are
online. This can be checked through dba_data_files under the
status column. For tablespaces, look in dba_tablespaces.
If that still does not resolve the problem then
2-PUT the following in the init.ora-
event = "10015 trace name context forever, level 10"
Setting this event will generate a trace file that will reveal the
necessary information about the transaction Oracle is trying to roll
back and mostimportantly, what object Oracle is trying to apply
the undo to.
3-TAKE the corrupted rollback segment out of the rollback_segments parameter in the init.ora
4-SHUTDOWN the database (if normal does not work, immediate, if that does
not work, abort) and bring it back up.
Note: An ora-1545 may be encountered, or other errors, that is ok.
5-CHECK in the directory that is specified by the user_dump_dest parameter
(in the init.ora or show parameter command) for a trace file that was
generated at startup time.
6-IN the trace file, there should be a message similiar to-
error recovery tx(#,#) object #.
TX(#,#) refers to transaction information.
The object # is the same as the object_id in sys.dba_objects.
7-USE the following query to find out what object Oracle is trying to
perform recovery on.
select owner, object_name, object_type, status
from dba_objects where object_id = <object #>;
8-THIS object must be dropped so the undo can be released. An export or
relying on a backup may be necessary to restore the object after the corrupted
rollback segment goes away.
9-AFTER dropping the object, put the rollback segment back in the init.ora
parameter rollback_segments, removed the event, and shutdown and startup
the database.
In most cases, the above steps will resolve the problematic rollback segment.
If this still does not resolve the problem, it may be likely that the corruption is
in the actual rollback segment.
At this point, if the problem has not been resolved, please contact
customer support.

Yes we were having the performance issues when it is getting locked? in this what i want to know
why it happens suddenly?
or what package this piece of code is calling?
or is there any possiblity of system will degrade the performance like sys user etc...?
where exactly i found the root cause for further analysis?
so that next time onwards if particular objects is locking we come to know why it happens is there any logical false or how do we eliminate this issue last time?
coz in our environment sometimes most of lockings are from the same table?
pls let me know where i have to concentrate for debug and how to troubloshoot and reslove this
sorry for the inconvience.. i m expecting the answer from here. if anybody wants some more info i ll let him know.
as of till now i got some docs i start to read this.
Regards
M.Murali..
Note: will system/sys degrade the performance ?if so how ?

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

How to resolve #Multivalue Error

HI All,
I have a data like below, in this for inpatient data is NULL and as per business requirement if data is null then "0". so i create a variable and drag into inpatient's total column
statement for inpatient is
=If IsNull([total]) Then 0 Else [total] Where ([items]="Inpatient")
items total
Office
4
Utilization
70
Inpatient
it is working and showing as "0"
but when inpatient has value it is showing #multivalue"
Office Visits
4
Non-Emergency ED Utilization
70
Inpatient Stays
40
how to resolve is issue
Please reply i am using SAP BO 3.1 INFOVIEW
Thanks in advance
Ranjeet

Hi Ranjeet,
First thing is you are getting this error because of the where clause used in the variable.
Because in the 2nd case when it has value for Inpatient, it is actually taking the same value for all the 3 cases.
How to remove null value with 0:
1. Remove where clause from the variable and use that variable in place of Total in the table report.
2. Use format number option to place 0 in place of undefined values.
Hope it helps. Please ask if you have any queries.
Regards,
Subrat

TS1702 Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

Maybe here:
IOS 6 App store crash: Apple Support Communities

My ipad2 is hang suddenly, how to resolve it?

Similar Messages

Maybe you are looking for