My ipad2 is not charging. Can I access my mail through my desktop?

My newish ipad2 will not charge. I've checked the socket and charger on my son's iphone and they are fine. I just get a black screen, if I click the home button I get a battery icon with red top for 5 seconds, then black screen again.  Can I access my icloud and emails through my windows desktop?

To know if it's really charging or not, note the percentage, plug it into your PC for an hour and then unplug it and check the percentage again.
Another thing to note, most USB ports only charge if the PC is on. (even macs to be honest) so to charge through your comptuer you have to leave the computer on. In some cases, letting it go to sleep will even stop the charging. The supplied power brick is honestly the best and fastest way to charge your iPad.

Similar Messages

  • Can't access AOL mail through Firefox or Safari

    For the past two days I have not been able to access AOL Mail through Firefox 3.6.3 or Safari 4.0.5 browsers. The AOL homepage loads fine, but when I go to mail - the pages do not load properly. This was working fine prior and I have used AOL this way for a couple years. I have other computers and they work fine.
    Today, I have tried a few different fixes. I deleted NetworkInterfaces.plist & preferences.plist from Library/Preferences/SystemConfiguration and upon restart and resetting of Network settings the AOL mail page loaded properly just 1 time in Firefox. Upon restart of Firefox, the same problem returned.

    Hi, have you done any Disk Maintenance lately?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Can't access iCloud mail

    Hi. I setup iCloud on my new iPad (3). I'm the only one using it. I created an iCloud email @me.com. However, I don't know how I can check that me.com email. When I go to iCloud.com, it only says Set Up iCloud on this device. I have done that. How can I log in? It's not as if I'm using another's iPad.. Pls help. Thanks! : )

    To check your emails use the "Mail" app on your iPad, new messages will be pushed automatically.
    Note: You can only access your mail at iCloud.com using a computer.

  • Can free online books be downloaded to memory of ipad2 so that book can be accessed when not within wi-fi range

    can free online books be downloaded to memory of ipad2 so that book can be accessed when not within wi-fi range

    It depends on what books you're referring to. All books from the iTunes Store are downloaded to your iPad and except for any special features the book may contain that requires an Internet connection will be readable without such a connection.
    If you're talking about books from some other source, we'd need to know the source before we could offer opinions.
    Regards.

  • HT5225 use a imac  os x 10.4.11.  I can't access my mail as of late yesterday.  Is there a system problem or can I now longer use my .mac email address.  I do not have any other device including a phone.  thanks

    use a imac  os x 10.4.11.  I can't access my mail as of late yesterday.  Is there a system problem or can I now longer use my .mac email address.  I do not have any other device including a phone.  thanks

    I reset the password. As you instructed, but that was not enough to solve the problem.
    To solve the problem I also did the following:
    For my user name I included @me.com., but I'm not sure that made any difference.
    I think the key to solving this was that I pushed past the error I got on the Outgoing Mail Server window. I wasn't sure I should do that but I was desperate:
    Next I got this window and checked SSL.
    That was it!
    Finally I went into account preferences and checked the outgoing mail server settings to be sure the server port was correct. It was.
    Thank you for your help.

  • Use a imac  os x 10.4.11.  I can't access my mail as of late yesterday.  Is there a system problem or can I now longer use my .mac email address.  I do not have any other device including a phone.  thanks

    use a imac  os x 10.4.11.  I can't access my mail as of late yesterday.  Is there a system problem or can I now longer use my .mac email address.  I do not have any other device including a phone.  thanks

    I believe they discontinued all mobile.me accounts yesterday.  It's been in the planning for a long time with lots of notification.  I believe you can still get access to the e-mail from Tiger but you'd need to browse past discussions on this forum for details on how.

  • Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Are you in an area where there is no coverage?
    You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If that doesn't help, then yOu'll need to contact Sprint again.

  • My new Ipad2 is not charging any suggestions?

    My new Ipad2 is not charging any suggestions?

    Thanks I used used my Iphone 4 plug and the ipad2 lead and its now charging Don't get why the plug that came with the Ipad wouldn't work or why it didn't work on my pc
    Thanks

  • After downloading ISO8 my USB Ports on my IMAC arnt working and now my iPad2 will not charge?

    after downloading ISO8 my USB Ports on my IMAC arnt working and now my iPad2 will not charge? even tried to use 240v charger? both my iMac and iPad have been updated, my mini iPad is working on old iso7 so that won't be updated in a hurry, any help would be great.

    First is the most USB ports do not provide enough power to charge an iPad. Do not try and charge your iPad from such USB ports.
    There is no 240v charger. There is one charger that will work with US voltages and European voltages. If your iPad is not charger with the charger, make certain that is an iPad charger, not an iPhone charger. If the charger does not work try swapping the cable as the cable may be bad. If that does not work try another charger. All simple steps that should be attempted before pinning the problem on IOS 8.

  • My ipad2 will not charge or start

    what do i do, my ipad2 will not charge or start?

    First make sure that you are using the charger that came with the iPad and have plugged that into a wall outlet. Keep in mind that if the battery is completely drained it make take up to an hour on the charger before the iPad responds. So wait one hour then, while the iPad is still plugged in, reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad restarts let it continue to charge until the battery is 100%.
    If the iPad does not start consider these troubleshooting steps.
    1. Bad outlet. Make sure the outlet is providing power.
    2. Bad charger. Try a different charger.
    3. Bad cable. Try a different cable.
    4. Dirt, fuzz, or lint in the connection ports. Check and casually clean if necessary.
    5. Software failure. First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    6. Hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Can someone access my email through iCloud if they used to have access to my email?

    Can someone access my email through iCloud if they used to have access to my email?

    Your question is not clear. If it is a Yahoo email account, then where does iCloud come into the picture? Or do you mean you are using the yahoo.com email address as your Apple ID? These are entirely different things. The Yahoo email account is not in any way related to the Apple ID that is using that email address as the Apple ID.
    Cheers,
    GB

  • Mail worked fine for 2 days on Lion and now I've restarted and get spinning ball.  Can't access my mail.  At all. Osx 10.7.1 2.26 Ghz Macpro

    Mail worked fine for 2 days on Lion and now I've restarted and get spinning ball.  Can't access my mail.  At all. Osx 10.7.1 2.26 Ghz Macpro

    The settings seems to be correct...As you were able to ping the ip 192.168.1.2,it should open the setup page..Try to disable the firewall,ant-virus and other security software if any and then,try...Also try to adjust the browser settings on the computer... Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...Now try..
    It should work now...If not then,you have to reset the router and need to reconfigure it again..

  • Downloaded Firefox 4.0, get server error 404 & can't access Yahoo mail. It opens with Explorer & on desktop with Mozilla 3

    Downloaded Firefox 4.0, to Dell Lat D630 on 4/9/11
    Get server error 404 & can't access Yahoo mail.
    It opens with Explorer & on networked desktop with Mozilla 3.6
    tried all fixes suggested by Support @ Customer Service
    No resolution to the access problem today 4/21/11. Do I reinstall 3.6 & delete 4.0? I understand this access problem is common to 4.0 users.

    I did some additional testing through Proxy 4. All web sites and web pages including secure sites that I tried accessing over the past couple of days all appear to work fine with the exception of the forementioned sites. Access to these specific web pages (which I cannot currently access) are part of our day-to-day business requirements, and therefore will prevent me from using Proxy version 4.0 as our production proxy unless I can figure out why these web pages won't load, and how to fix the problem.
    As an experiment, I tried to access these web pages through Proxy 4 with Mozilla FireFox and Netscape 7. None of these web browsers (including Internet Explorer) will bring up these web pages when going through Proxy 4. But bypassing the proxy or going through our v3.6 proxy works fine for these web pages everytime, and with all browsers. This leads me to believe that this web page access problem is not a browser specific problem, but something in Proxy 4 isn't processing the request to display the page properly.
    As a reference, the web site in question is http://www.sunlife.ca. On the left hand side of the page go to "Sign In" then "Plan Members". Thats where the request hangs through Proxy 4 no matter which browser I use, including Netscape... but works perfectly fine with Proxy v3.6.
    Can someone who is running a version 4 Proxy also please try to access the SunLife Members login page and see if it works or fails for you?
    Thanks

  • Can't access e-mail! Keeps telling me to verify password.

    Using firefox 3.6 Installed update 9/7/11 about 5pm cdt and have not been able to access e-mail since then.

    I had the same problem yesterday, but it fixed itself after an hour or so. Can you login now?

  • How can I stop Yahoo mail from automatically loading my user id and password when I access Yahoo Mail through Firefox?

    When I access Yahoo Mail through Firefox, as soon as Yahoo mail opens, my userid and password have already been entered. I do not want this to happen since other people use this computer. How can I stop this? this does not happen when I access through Internet Explorer.

    It looks like your password is stored in the password manager. See [https://support.mozilla.com/en-US/kb/make-firefox-remember-usernames-and-passwords?s=remembering+passwords&as=s#w_viewing-and-deleting-passwords Viewing and Deleting passwords]. Moreover, your Firefox version (3.6.18) is outdated. Go to Help < Check for Updates.

Maybe you are looking for

  • How do I use Generic LDAP Authentication in JDeveloper?

    I have an existing JSP/Java Servlet application that uses a generic LDAP server for user authentication. Each JSP page checks the user name against a database entry for authorization to that page (it’s a legacy app). The following web.xml fragment

  • ASA 5505 vpn connection issues

    Hello I am having some issues with getting my vpn connection working on a new site. I get no internet connection when hooking up the asa. My current config is below. I have included a packet trace from my remote site to my main site. Any help would b

  • Complete Delivery at Line item level in Sales Order

    Hello Gurus, While creating a sales order for some customers (the sales area tab in the customer master data has complete delivery and full delivery at item level), the complete delivery flag should be enabled and partial delivery flag at item level

  • Why do I get a memory leak when I use the Write Data Storage VI in a loop

    I have a large application that I am collecting various data points from. For the most part they are simple scalar values that need to be logged on a regular basis.  I was attempting to use the new TDM files and the storage VI's  I though everything

  • Adapter Module error

    Hi, I made some code changes to a file adapter module code which was working fine [ before the changes were made]. After making the changes and redeploying the adapter module 'am getting the following error in the RWB communication channel monitoring