My ipad2 is not connecting to the internet
I bought an ipad2 yesterday it connected to the internet and app store no problem to begin with but now it keeps saying it cannot connect to the internet even though on my settings it is saying the wifi is connected.
I have a sky router - netgear and my ip address, router and dns all begin with 192.
what do I do, do I take it back for another one?
Tap Settings / General / Reset / Reset Network Settings then restart your iPad.
If that didn't help try here > Apple - Support - iPad - Wi-Fi Assistant
Similar Messages
-
My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.
Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanksThere is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems. -
My iPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding". I've run the AirPort utility and it shows that I'm connected to my Wi-Fi. The connection works with both my iMac and iPhone. I'm concerned that the problem is with hardware rather than software.
Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo -
my ipad2 will not connect to the internet, it says that it "unable to join"...but my laptop is connected to the internet.... i don't understand why all of a sudden it stopped connecting it dosent make sense.
hmm, well I would say that raises the possibility of an issue with your ipad, and lessens one with your router.
What version iOS are you using? Update
Then Its time to try a restore.
How to update your iOS device
http://support.apple.com/kb/HT4623
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766 -
Safari on ipad2 is not connecting to the internet, how can i make it work?
since over 48 hours my safari on ipad2 has stopped connecting to the internet, lathough my pc does connect readily. I have tried clearing ipad2 of cookies and data an dhistory, switched off and restarted both ipad2 and modem, but with no results. can anyone who has resolved thisproblem help?
TKTap Settings > General > Reset > Reset Network Settings
Then restart your iPad.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If that didn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections
-- Some support links are down for maintenance but should be available shortly. -
My ipad 2 appears to be connected to the internet(all bars are up in the left hand corner).....yet I cannot connect to the internet(Safari cannot connect open the page because it is not connected to the internet)
I unplugged my router for 30 seconds and restarted my ipad...still nothing
I really don't think it is my service because my laptop works fine...as I am using the internet right now
I only had this ipad for 2 days
Are there any suggestions that can help solve this problem?Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
Why does my iPad2 tell me I am not connected to the Internet
When attempting to launch Safari I get an error message telling me I am not connected to the Internet. It works fine when about three feet away from the Time Machine but not in my living room some ten feet away even though the signal strength indicator shows full. I have tried reset several times and, again, while in the other room, when I type in my password, I get an error stating that the network cannot be joined.
I assume that something in your preferences files, maybe
Macintosh HD:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.LSSharedFileLi st.plist
(I don't know why the message parser added a space between redLi and st)
contains references to files stored on the network.
Try to move it on the Desktop before running Pages.
An other track may be fonts stored somewhere on the network, not on your machine.
As Pages use its own cache file, the System may have a correct list of reachable fonts but Pages is unaware of this reduced list.
The cache file is:
Macintosh HD:Users:<yourAccount>:Library:Caches:com.apple.iWork.fonts
Try to move it on the Desktop before running Pages.
Post here the results of these tests.
If the problem is really linked to one of these files, I will be able to write a script to run to launch Pages. It will delete the offending file before launching the app.
Yvan KOENIG (VALLAURIS, France) vendredi 10 juin 2011 16:25:23
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
I just downloaded the latest iOS.7 upgrade on my ipad2, and since I can not connect to the internet using my cellular data plan. I have checked my data plan and it's both current and over 2GB remaining. However the indicator shows no service, thus would be the best steps to recover. Thanks much for any support that can be provided.
Hello Kmart2@3
Check out the troubleshooting article below to get cellular to start working again.
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Regards,
-Norm G. -
TS1398 How to connect iPad to private router not connected to the internet?
I have an iPad 2 running iOS6.1 that will not connect to my Asus RT-AC66R router when the router is not connected to the internet. The message I get on my iPad is "The cable for ethernet is not plugged in". This also happens with my iPod gen 5.
I'm trying to control Philips Hue bulbs with their Zigbee bridge connected to the router, but I do not want a connection to the internet. The Hue app works with an Android phone and an older iPhone 4 running an older iOS version without the router connected to the internet. The newer iOS6 seems to want to have access to the internet, but having internet access should not be required for this application.
If I do connect the router to the internet, the Hue app works on my iPad2 and it continues to work for a couple of minutes after I disconnect the internet cable. Then I get the message "The cable for ethernet is not plugged in" again. I'm doing this at work where I'm not supposed to connect the router to the work network cable, else it wouldn't be an issue.mrogers641 wrote:
How can I install Mavericks on a Mac that is not connected to the internet? Is there a way to copy OS 10.9 to a USB drive an then install it?
Log in to another computer, family's or friend's, and download it to a USB drive, using YOUR OWN Apple ID and then install it onto your Mac. Preferably you could use someone else's WiFi connection to directly download and install on your Mac,
Cheers
Pete -
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
Friends,
I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system software? Thanks in advance!OK, what you should do is download the updates on another machine and burn them to a disc. Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates. Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install. Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
My suggestion is this: if it looks like you might need a download, get it onto that disc. -
Adobe creative cloud say i'm not connected to the internet, but I am
adobe creative cloud says i'm not connected to the internet, but I am
If you statee more aout your set up about your relation to the Cloud a l9ittle of the history something to go on right now tht is believe it or not ptretty vague.
i do not relly particfipate in the forum but I doubt that the other users will have an easytime helping you without more informtion.
Offhand I wouuld say it was a permissions issue fwiw. -
Why is my find my friends app not working at all?! It just says that I'm not connected to the Internet but I am.
1. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
2. Make sure phone number or email address is correct
3. Restart iPad -
I recently purchased an iPhone 5c and for some unknown reason I can't connect to my wireless router's network at home. I've tried establishing a seperate IP address, manually adding the iPhone device, and even spent an hour with Centurylink's IT support and they couldn't figure it out. They said it was an iPhone error. I had an iPhone 3 about 1 1/2 years ago that had the same problem. I ended up getting rid of the phone because I couldn't solve this problem before. I thought a newer phone would not have the same problem.
My phone shows that I'm connected to my home internet, but when I open up network information for my home internet there is no IP Address listed. Safari and my other apps also state that I'm not connected to the internet. I'm ready to sell my phone back and go to an Android since I didn't have trouble connecting with it before. We also have a Macbook and iPad that both connect to the internet just fine. Please....oh please help.I was having the same problem; I tried all the recommended fixes in the "more like this" and nothing worked, but finally found the answer. Try this: http://themiddleofthestreet.blogspot.com/2013/11/if-your-iphone-5s-wont-connect- to-wifi.html
-
I want to download Firefox on a flashdrive so I can then download it to my home computer which is not connected to the internet. When I download Firefox, it won't let me change the path and so tries to download on a public computer, which isn't allowed. The reason I want it on my home computer is because I'm creating web pages and I want to view my html pages using a variety of browsers, including Firefox.
From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.
Maybe you are looking for
-
Sahre playlist on same computer with different users
my brother and myself both share our computer but have different login accounts. is there a way that we can share our itunes libraries without having to grab the songs and load them into our itunes?
-
What are the prerequisites for GATP and how to check SO in APO
Hi I've created a Sales order in R/3. for this the availability check is being done in APO(SCM). when I press enter it is going to APO(SCM). now i want to see this Sales order in APO(SCM), what is transaction for this? and do i need to maintain any C
-
Hi there, I'm busy with a documentary (90min cinema/tv production) since one year. I started with CS06 on a Macbook pro (maverick, 15' 2,8GHZ). Everything was fine and I barely never had a problem - despite the fact that the computer was quiet slow.
-
Leopard won't Install on MacPro G5 Quad
Hello, This is my first post. Thanks in advance for any help you can provide. Problem: I recently tried updating my G5 from Panther to Leopard using a new family pack disk purchased on Amazon.com. During the first install attempt, the computer crashe
-
Selection of Levels of a member in FR
In one of the report, i need to select the Lev0,Lev1 of a member1 in the dimension "customer". There is a default list available like Lev0,Customer.,Lev1.customer...Lev2..Lev3 in the selection list But i want the Lev0&Lev1 members of member1 in that