My ipad2 is stuck in negative color mode!

I am new to the iPad world. But my ipad2 is stuck in like the negative color mode whereas everything is in off color. I forgot how to change it back, I know it is something to do with holding a button down. Please help!

Triple click the Home button to turn it on/off.
Also, you can turn it off in Settings > General > Accessibility.

Similar Messages

Help Im stuck in 256 color mode

I can't seem to get my computer back on infinite color mode. I have changed my preferences and have 1490x900, Millions checked. But the color appears to be stuck in an old 256 color mode. I also have a monitor icon that appears in the upper right hand side of the screen but that was never there before.
I'm running OS10.4.8... on my iMacG5
iMacG5 iBookG4 Mac OS X (10.4.8)

Open the Universal Access pane of System Preferences and check the settings in the Seeing tab; these settings can affect the colors displayed on the monitor.
(19484)

HT201412 my ipad2 is stuck in recovery mode after itried to update software before than it was working fine

how to fix this issue.
My ipad2 is stuck in recovery mode after i tried with my lap top to update software plugging my ipad with it.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...

TS1702 my camera is playing up its stuck in negative mode. even when i play a video and on youtube it plays in black/white negative mode. anyone help please?

my camera is playing up its stuck in negative mode. even when i play a video and on youtube it plays in black/white negative mode. anyone help please?
<E-mail Edited by Host>

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

My ipad2 is stuck in portrait mode after iOS 7.0.4 update. How do I get it to rotate again?

My ipad2 is stuck in portrait mode after iOS 7.0.4 update. How do I get it to rotate again?

Try following the instructions in this thread: http://discussions.apple.com/message/23028588#23028588

Could not use color replacement tool because it only works in full color mode: Elements 11

I have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode". The Image>Mode is set to RGB. I'm stuck!

First, show the tools optiond in the bottom of the screen (shortcut F4)
Now look at which of the three options you can select, brush, impressionist brush or replacement tool. I suspect you have to select the brush.
Edit:
The reason of the message is that when you are painting on a mask you are in greyscale mode for the mask. For instance, if you paste a coloured layer into a mask, it will be converted to greyscale.

Automatically convert from RGB to CMYK color mode

I have over 900 barcodes provided in EPS format. When I open them in illustrator, they are coming in as an RGB color space file. I need them gray scale solid black in CMYK color mode. I can batch using actions to convert the artwork using "Edit Colors > Convert to Grayscale". However, the document color mode remains RGB. It appears, even after using "Convert to Grayscale", that the RGB color mode goofs up the placed .ai file in InDesign, treating it as RGB and seeing it as a mix of CMYK rather than the 100% black only it needs to be for proper sharp printing.
The actions pallet doesn't record converting the document color mode. Is there a way to automate that file conversion so they are all saved as CMYK rather than RGB, or am I stuck opening each of the 900+ files manually?

While recording the action, from the popup menu in the Actions Panel choose Insert Menu Item, then from the main menu choose File > Document Color Mode > CMYK color.

Bug? Stuck in album art mode!

Apparently, there's some sort of glitch in color iPods that allows you to get "stuck" in album art mode (the screen you get when you hit the select button twice in Now Playing). I've only verified this on my 20GB color iPod.
I know this sounds ridiculous, but try the following: Play any song, retreat to the main menu on your iPod, and select Now Playing. Now click the select button twice, the menu button once, and the select button once again, all within the timeframe of about one second. You have to do it fast.
Your iPod should now be "stuck" in album art mode. Not only will the screen not go away after a few seconds as it usually does, but you can navigate to other songs, and the iPod will behave as if the album art screen were the default Now Playing screen. To get out of this, click the select button a few times, and your iPod should be back to normal.
If anyone else can verify this, that'd be great.

This is a known "feature". A lot of people rather look at the full screen art than the "Now Playing" screen.
I found a much better looking way to do this. Simply add all the album art to the iPod as photos. When the music starts playing, go back to the Main Menu, select Photos -> Photo Library, then Select the appropriate album art photo. Or, select any photo, then scroll through them the same way you change the volume level. The display is now truly "full screen", with the artwork as big as it can be, and on a black background. The only downside is that the backlight remains on (not a problem if you're connected to power). You can at this point press Select and start a slideshow with your artwork...

Why is ONLY my FaceTime background negative colors

Only my FaceTime background that shows my contacts of missed and all is like negative color but it's just that nothing else my negative color is off in general so don't suggest rhat

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

Converting from pantone to cmyk color mode in Indesign CS3??

I am working on a business card for a customer, I am using Adobe Indesign CS3.
I use an outside company for the printing job called 4over (4over.com) and they require you use their cmyk pdf print engine so they can do the job properly... Basically to break it down: I am in Indesign CS3, I choose Print, and as the printer I choose their "4over pdf cmyk print engine" so the colors do not convert and the color doesnt change when they use their printers.
4over is telling me my document is in pantone color mode, they can see the pantone color 371C, but not the cmyk values.
How do I change from pantone color mode to cmyk color mode???
if anyone can help me please. I would really appreciate it.
I attached the file I sent to 4over incase that helps anyone answer my question.
Thank you,
Brandon

Before exporting, in the swatch panel, select your Pantone colour, right click and select swatch options. Change the color type to Process and the color mode to CMYK.
If it's a business card and you showed the client a pantone swatch, know that you won't get the same colour results. There's a very useful Pantone book available that shows swatches side by side with CMYK values.
http://www.pantone.com/pages/products/product.aspx?pid=283&ca=1&s=4

Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.

Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.

The EXACT same thing happened to me last night! Rented a movie; it had barely started and then froze. When I touch the video app icon, all I get is a blank, dimly lit screen. None of the other videos I own will display either. Was your problem ever resolved?

ITunes puts my computer in windows 7 basic color mode. It also does not recognize my iPad as viable video source

When I start iTunes on my desktop computer, instantly it switches to Windows 7 Basic Color mode:
"The color scheme has been changed
The following program has performed an action that requires Windows to temporarily change the color scheme to Windows 7 Basic.
Program: iTunes
Publisher: Apple Inc.
Process indentifier (PID): 3296
Windows will automatically change the color scheme back to Windows Aero when this program or other programs performing similar actions are no longer running."
When I close iTunes, it immediately switches back.
THEN, when I try and move a movie I have recently downloaded ("Tangled (2010)" or "Tron: Legacy") to my iPad (1st edition) or iPod Touch, iTunes tells me these devices are not supported:
"Tangled (2010) was not copied to the iPad "My iPad" because it cannot be played on this iPad."
I get the same message with "Tron". This is only happening with the movies I have downloaded after February. All previously downloaded movies work just fine. I have found when I transfer the new files to my laptop and use iTunes on there, everything works normally.
New for today...
When I plug the iPod Touch into the the desktop computer, iTunes locks up completely. I only get it back when I unplug the iPod.
Solutions...
I have done minimal talking via email with iTunes support. They told me to make sure I had the updated version of everything. I had explained in my original inquiry I had done that already. When I replied as such, I did not get a reply. I sent several messages explaining that I have deleted itunes all together from my computer and reinstalled the program from scratch. Finally, I received a second reply to reinstall iTunes.
Also, I have tried several ways of moving the movies over to the iPad and iPod: dragging/dropping, sync, auto sync. I get the same error message every time.
I am more than a little frustrated with Apple's lack of support and hope someone out there knows something that can be done. PLEASE HELP!
My desktop computer:
Homebuilt with EVGA 58x motherboard
Processor: Intel i7 920 @ 2.67GHZ
RAM: 12 GB
System Type: 64-bit Operating System
OS: Windows 7 Ultimate w/Service Pack 1
nVidia GeForce GTX 275 1GB GDDR3
DirectX 11.0
My laptop:
HP Pavilion dv6700
Processor: Intel Core Duo T8100 @ 2.10GHZ
RAM: 3 GB
System Type: 32-bit Operating System
OS: Windows 7 Ultimate
nVidia GeForce 8400M GS
Thanks in advance,
Scott

Just curious, have you resolved your issue yet?
I am working on a friend's computer that had the same issue and it turned out that her iTunes was set by some crappy program called TuneUp Companion to use Windos XP compatibility.
If you have TuneUp Companion, uninstall it.
Then check to see if iTunes is trying to run in some prior windows version compatibility and turn it off
http://support.apple.com/kb/TS1489

Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.

Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.

Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.

My illustrator CS6 crashes when i try to open an AI file with RGB color mode

My illustrator CS6 crashes when i try to open an AI file with RGB color mode. I worked on this file yesterday and changed it to RGB mode. Today i tried to open the file again but illustrator won't open it and crashes. It does work when i want to open a file with CMYK color mode.
Anyone know how to fix this ?

Have you tried trashing the prefs?

My ipad2 is stuck in negative color mode!

Similar Messages

Maybe you are looking for