My ipad2 safari is not responding and has greyed out

safari on my ipad2 is not responding and has greyed out... is there a way i can sort it out ?

If you follow Bob's instructions.. allow it to cool down.. maybe leave it off overnight.. if the disk fails to start when you power on.. or listen carefully and hear if the disk is failing to spin up properly then you have either dead drive or dead supply.
Is it in warranty or applecare, let apple replace it?
If it is out of applecare even, open it and replace the disk.
How old is the TC? What model from the rubber mat A1xxx? What size disk?
Certain drives are becoming unreliable.. The WD black in Gen2, The Samsung Spinpoint in Gen3 and WD green in Gen3 and Gen4 are none of them great drives.
Out of warranty do the job yourself.. there is plenty of stuff about drive upgrades for the TC.
Excellent instructions here.
http://www.ifixit.com/Device/Apple_Time_Capsule

Similar Messages

  • IPod touch not responding and has white screen. Tried to restore, drain battery and re-charge etc but still nothing. What can I do?

    iPod touch not responding and has white screen. Tried to restore, drain battery and re-charge etc but still nothing. What can I do?

    Try what you have not tried so far. You may have tried all and the Apple store maybe in order.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • R9 280X Display driver not responding and has recovered error

    Hi,
    My new R9 280X OC Edition causes  "Display driver is not responding and has recovered..." error. After this error, my game would hang. It also caused internet browser to crash.
    It has been very frustrating, after 10 minutes of game play, the game would just crash. I have tried many way to try to solve the problem without success
    I have.
    1) Over clock/ lower the graphic card clock
    2) install/reinstall latest ATI release/beta driver, reverted to driver that come with installation disk
    3) update my motherboard bios
    4) reinstalled windows 7
    My PC Spec is
    Windows 7 32 bit
    4G RAM
    Intel Core i5-2500K @ 3.3 GHZ
    Any help would be appreciated. Thanks.

    Use >>this<<
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (302.rar) and put the included file (TV277MH.302) on that stick.
    Rename TV277MH.302 to 302.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 302.rom [ENTER] and let it flash the vbios.

  • After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

    After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out.  There is no function at all.

    Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo.  It was suppose to show you how much data you use to help keep you within your limits.  If you have downloaded this, go through your settings and delete it and it will fix the problem.  At least it did for me.  I can now send photo's to non Iphone users via text no problem.

  • Constant "not responding" and screen whites out

    Ever since I've been using Firefox 3.5 or so (currently Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.17) Gecko/20110420 Firefox/3.6.17) I have constant messages in the window bar (Not Responding) and the open page whites-over and Firefox quits responding. it's happened 4 times while I've typed this far. It makes the browser completely unusable. What is causing this? There's also a little grey box up by the search-bar that has "2c" in it I never noticed before where logos for various browsers I've used in the past usually have a logo.

    It still happens when I turn off all extensions and in safe mode. I have 3 gigs of ram, Win 7 and if Firefox is open the thing constantly does this white-out, not responding thing. Same browser on my eMachines desktop and Toshiba Satellite laptop with XP is just been fine. Upgraded it to FF 4 on less used eMachines Saturday, though I don't really like the look and feel yet. Don't know if this is a Win7 problem or Firefox. Another weird thing is that bookmarks imported from Toshiba now won't let me save new bookmarks. Usually truncates the folder I put new bookmark in. If the browser crashes on the Win7 machine, recent bookmarks just disappear. Sometimes even when I do a controlled shutdown, they still disappear. Is the install corrupted possibly? And is there a way to wipe and reinstall it?

  • Why the top bar at Safari is not responding and the book picture stays blue

    the last two days the bar at the top of safari page is not responding. The book indicator looks like it stays pressed and all other functions are blocked.

        Delete safari .plist file.
        Quit all applications.
        Option click the "Go" menu in the Finder menu bar.
        Select "Library" from the drop down.
        Library > Preferences >  com.apple.Safari.plist
        Right click on it and select "Move it to Trash".
        Restart.    Relaunch Safari.
        If this doesn't help, put back the com.apple.Safari.plist
        Right click the Trash icon in the Dock and select “Open”.
        Right click the com.apple.Safari.plist and select “Put Back”.

  • Toolbar buttons do not work and are greyed out not allowing me to log in or log out

    I have increasingly been frustrated with firefox not allowing me to log in and or log out of important websites in which i pay my bills online This happens because the toolbar buttons are greyed out. It makes this feature non functional, therefore I have to resort to closing the website page without logging out. Can you tell me how to fix this problem? When i click on the buttons there is no response; its as if they were drawn.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Safari do not open and ends up not responding

    Hi,
    Safari no longer works for me after a software update. Safari will not open and ends up not responding upon launch at which time I have to force quit.
    I have gone through the Mac help forums without finding a suitable answer and I tried the following actions but unfortunately not one is working.
    -I have tried to uninstall and install safari again (to uninstall the program I have deleted also all the cookies in preferences and library and application support);
    -I have created a new user and safari does not work for the new user either.
    It seems to me that the mac feels that a safari window is open but I cannot see it.
    Any suggestions would be very appreciated.

    A few things you can try (I see you have tried some of them already):
    If your Safari won't open, one or more of the following procedures should fix it:
    1. Go to Home/Library/Safari/ folder and remove the following two files:
    ¥ history.plist
    ¥ lastsession.plist
    (Safari may not load properly If these two files are corrupted.)
    2. Go to Home/Library/Caches/Metadata/Safari/ and remove the contents of that folder.
    (These are just webhistory files and are not required for Safari to run. However, similar to preference files, problems can arise if they have become corrupt.)
    3. Locate the cookies.plist file that's located in the Home/Library/Cookies/ folder and remove it.
    (Again, faults in stored cookies may interfere with Safari's launch.)
    4. Check whether any of your third-party internet plug-ins may be interfering with the launch of Safari by carefully moving them to the desktop (do NOT delete them at this stage). You can find these in two places:
    Home/Library/Internet Plug-Ins/ folder, and Global plug-ins are located in the Macintosh HD/Library/Internet Plug-ins/ folder.
    Also look in Library/Input Managers where other third party add-ons may lurk. If you find a SIMBL folder, please note that some SIMBLE.bundles may require updating or possibly removal.
    Restart Safari and place them back in the correct folders, one at a time, closing and re-opening Safari each time. If you discover that one of them was causing the problem with launching Safari, trash it and download and install a fresh copy.
    If Safari is getting very slow:
    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296
    If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
    You could also try these codes as well: 4.2.2.1 & 4.2.2.2
    If you use a Router, make sure it has the latest firmware installed.
    One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x
    This is described here:
    http://support.apple.com/kb/TS3408?viewlocale=en_US
    If Safari seems to hang for ages:
    If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
    Open the Terminal from the Utilities folder in /Applications and type
    killall -9 WebKitPluginHost
    Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
    Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The latest versions of Flash 10.1 appear to have improved the situation somewhat, but haven't completed eliminated it.

  • I am on Software  Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?

    I am on Software  Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  2 GB 667 MHz DDR2 SDRAM
    Graphics  NVIDIA GeForce 8600M GT 256 MB  

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?

    I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Illustrator has not been responding for over a week, I can't open or force quit it. I've already uninstalled, reinstalled, and deleted the preferences folder, but the icon in my dock seems corrupt and is causing the program to not respond and I can't dele

    Illustrator has not been responding for over a week, I can't open or force quit it. I've already uninstalled, reinstalled, and deleted the preferences folder, but the icon in my dock seems corrupt and is causing the program to not respond and I can't delete it.

    Tamara,
    Did you reinstall using the full three step way (otherwise strange things may linger)?
    Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • My macbook pro (2010 13inch) is really laggy when I'm using apps like iTunes and safari. the arrow on the screen seems to not respond and is laggy and when viewing videos it can be really laggy. I just want to know if it was a problem i could fix, thanks.

    My macbook pro (2010 13inch) is really laggy when I'm using apps like iTunes and safari. the arrow on the screen seems to not respond and is laggy and when viewing videos it can be really laggy. I just want to know if it was a problem i could fix, thanks.

    You might start with:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    If the above reveals nothing helpful, then create a new user account. Log out of your account and log into the new account. Do the problems cease?

  • For the last two days, firefox has been freezing or Not Responding and giving error message

    every 30 seconds or so firefox tells me it is not responding. and once it comes back it gives me the following error message.
    A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
    Script: http://cdn4.specificclick.net/img/?ag=1&pb=9788&pg=293059886053054629&us=IuOJnv_awGu5HD&nwk=1&rnd=53585:3534
    I did install a java update, don't know if this is related.

    It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • Every time I open Firefox or open a page in a new tab, I get the error message that a script on this page is not responding or has quit working. This has only happened since I upgraded to 5.0.

    Even when I start firefox I have to sit here and wait for it to tell me a script on this page is not responding or has quit working. Once that happens which takes a while, I can say stop script and it moves on. I've always liked using firefox and have never had a problem in the past, however if I can't get this particular problem fixed, and I've tried many ways to do this, I may have to change to another browser. I would hope that you could find out why this is happening to me before I make that decision. One other thing, I am using the dreaded Vista OS.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • (06 Oct 14) updated firefox and Kaspersky, now have problems with Barclays site - firefox "not responding" and plugin error on trying to close. Help!

    Updated Kaspersky to 15.0.0.463(a) - ( comes with "safe money" - now turned off).
    Updated Firefox from (old) version to 32.0.3.
    Barclays bank site loads properly, and allows access to accounts BUT when I try to look at a statement, Firefox "not responding" and a blank/ unresponsive page is displayed.
    In order to acheive any movement I have to close firefox... this gives rise to windows wanting to send error data, and Firefox apologising for loosing the tab.
    None of which allows me to do essential banking transactions.
    It is this machine that has the problem - I can access without problems via work computer (using google Chrome)

    My guess is that your statement is a PDF document, since banks and other companies often use that format for statements.
    Firefox has various options for viewing PDFs, including a built-in PDF viewer (not as full featured as Adobe's), or the option to use a plugin such as Adobe Acrobat, or to launch the PDF in an external application. This article describes how to experiment with that setting: [[How to disable the built-in PDF viewer and use another viewer]].
    On another subject, your plugin list has various plugins described as "Google Chrome Extension". I haven't seen that before. Could you review the list and see whether they really should be active in Firefox or can be deactivated?
    Open the Add-ons page using either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Plugins.
    For those that are not essential, I suggest changing them to "Never Activate". This might not take effect immediately in that window, but should disable them in new windows.

Maybe you are looking for

  • E45-4200/Locking Cable

    I cannot locate the hole to insert a locking cable into my laptop.  I went to Best Buy and the guys looked at all the Toshiba Ultrabooks.....no one can find the hole to insert the locking cable.  I'm traveling next week and want to secure my laptop.

  • Role not visible in Bex Publish or Save as

    Hi Experts,                    I have a new role created for adding my reports to it by the security team. My problem here is when i try to save my query or publish my query on to a role i am not able to see this new role. All the necessary auth obje

  • Error REP-3000 with parameter BATCH=NO in rwconverter

    Hi all: So we compile our modules in unix environment with this kind of sentence for reports. $ORACLE_HOME/bin/rwconverter.sh userid=sintesis/[email protected] batch=yes source=$fichcompilar stype=rdffile dtype=repfile overwrite=yes So we have the me

  • Deleting Planned depreciation.

    Dear Experts, Is it possible to close the FI-AA year without postin the planned depreciation? The issue is as under: the acqusition value of asset is 30000, chargable @ 4.75% depreciation. depreciation were posted upto 11th period, then we change the

  • Changing subnet of VDI clients

    Hi Everyone, We have an RDS 2012 setup, using 2 Hyper-V systems to provide Virtual Machines. We have recently changed from a flat network, and have now VLANed the network.  During this process, we put the Virtual machines on a separate VLAN from the