My ipad2 screen is just alternating between apple logo and stationary swirl every few minutes. Any suggestions?
it seems to be trying to boot, but never progresses. I cannot turn it off and no combination of buttons seems to change the pattern.
See the step 5 under the Resolution Section here. You may need to take step 5 to the next step which is recovery mode. The kb article has a link to that as well.
iOS: Not responding or does not turn on
Similar Messages
-
MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!
Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again
-
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
IOS Beta 7 OTA, iPhone 3GS stuck flashing between Apple Logo and a white screen
After installing iOS Beta 7 OTA, iPhone 3GS is stuck flashing between Apple Logo and a white screen. I can turn the phone off by holding the top button. But the phone boots straight to the flashing situation. It doesn't appear in iTunes, and I haven't succeeded in putting into recovery mode.
in the end ... i did it too.
for sure, the problem is not related to OTA update
this is my recipe, even if i think that the behaviour is a kind of random and all the recipes given here do not really help
- absolutely needed: cross your finger before running the procedure
- leave the battery run flat
- open itunes
- connect usb
- when it starts booting, press home and keep it pressed
- if it loops (it will ...), try to turn it off with power button while keeping home
- after a few tries, it will not reboot and it will go into recovery mode BUT WITH SCREEN BLACK (you see it is in recovery mode in itunes)
- upload ios5b7
anyway ... this time it was a bad release by apple ...
and i think this thread will become very "popular" in the next days -
how can I unlock my iphone??? on the screen I only have the apple logo and a thing that looks like if the phone is working but no advance
Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
HT203175 i-pod touch screen is frozen with the apple logo and a bar under it
i-pod screen is frozen with the apple logo and a bar under it
If your phone has been modified this will not necessary help...
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
My ipad2 is like frozen on the apple logo and makes a beeping noise what do i do?]
my ipad2 s like frozen on the apple logo and is making a beeping noise what do i do?
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
My macbook is not starting properly, remains white screen as it is with apple logo and spinning gear
my macbook is not starting properly, remains white screen as it is with apple logo and spinning gear
Hi..
Your profile indicates you are running Lion v10.7 so you need to use Lion Recovery to repair the startup disk if necessary or reinstall Mac OS X. -
I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP
The typical fix if the progress bar totally freezes - meaning no movement at all for more than 20 minutes - and iTunes will no recognize the device - is to try to put the iPad into recovery mode. That is explained here.
iPad: Unable to update or restore
However, don't jump the gun. Keep an eye on the progress bar and if it is moving at all - even very slowly - let it go for a while. I'm updating my iPod touch first and the progress bar is moving but very slowly. -
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
help me , my iphone 4 cant turn on .. it just go to apple logo and turn off again .. it is done repeatedly
you must get your phone to DFU and restore by using the iTunes
-
When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS. -
My daughter Nano just shows the apple logo and that is it can'y do anything with it.
My daughters Nano just shows the apple logo and that is it we can not do any thing with it.
Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)
-
I'd tried to restored my iphone but after that its just display the apple logo and nothing to work on?
Hello there, Shaneol10.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Providing a PS link to an internal Careers Site
Hi, Our functional staff has requested that the HCM navigational links to Career ("Root > Careers" and "Root >Self Service >Recruiting Activities > Careers") access the Internal link created in the Careers Site Setup. This url is similar to the follo
-
There used to be a preview window in mail where you could read the message in the mail box but now its gone. It just shows me who its from and the date. I now have to click on the message twice to get it to display. How do I get the preview box back?
-
My 2711x screen is blank, I try pressing f10 process but it's not working...what should be done? to turn on screen? Please help...
-
How to handle ORA-00001: unique constraint in EXCEPTION block?
Hi, Is there a specific exception thats raised when ORA-00001: unique constraint error occurs?
-
How to Automatically Set Allow in Network peer Assisted Settings
Hi I am working on cirrus. my application size is two small that settings popup is not showing. and by default it is set to deny....how can I set it to allow by default