My ipad2 shown sync itunes usb all time and I can't play ,can't do anything , can't entry 1st page , please help me and we walked to studio (Thailand)
Hello
We can't open my ipad2
Studio(Thailand) try to slync but ipad2 have shonw error 40 , please help to suggest me
Similar Messages
-
i just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot. please help
Just FYI
QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
http://support.apple.com/kb/DL27 <-- Quicktime 7.5.5 -
please help me with this im very upset and need help figuering out what im supposed to do anmd i need to get all of my music and every thing back sooo plesae help me
it would be amzinfg and if u could email me at [email protected] and help me fix my iopd please pleas ethis is very upsetting or call me at 1715 455 1315 that would be amazing if u could help me fix this asapTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- On a computer with iTunes verion 11.1 sing into iTunes with your account and agree there. Then try another reset on the iPod
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I right clicked my iPod on iTunes and clicked restore from back up because i thought it would undo my IOS6 update. IT DELETED ALL MY PICTURES (2,000) AND I DON'T KNOW HOW TO GET THEM BACK!!!! Please help me!!!!!
Well, if you have not backed them up, they are gone.
Next time, when you have important material in only one place, back it up. -
I have my Calendar app syncing with iCloud. Every time I open it it says, "Moving Calendars to Server Account..." It runs and runs and does not stop. As a result, I cannot access my calendars. Please help.
I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that. Can someone help?
Elaine -
I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.
Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?
-
itunes isnt recognising my iphone 4 after i restored my phone and updated it to ios7 on windows, but the computer recognises it...please help ppl..m done with all the recomendations given by apple
if require the new itunes11.1.X
if you already have that and it's windows then uninstall itunes
use regEdit you can type that in run or the likes and search and delete all hits you get on itunes
then reboot windows and install itunes again -
The syncing was perfectly in time with the rest of the song. I just came back to start working on it again, and it's completely off beat. What gives?
Also, I'd forgotten about this problem until just now, when I extend a loop (for instance, to play 2x instead of just one) it plays a phantom 3rd time. What I mean by this, is there's no track to tell garage band to play it a 3rd time, but it does anyway. If I copy paste the loop, it doesn't do it. I've got no idea what to do with this one. I'd really appreciate a quick response as I'm in the middle of a recording project :/
Thanks muchly
BrianHello Brian,
The syncing was perfectly in time with the rest of the song. I just came back to start working on it again, and it's completely off beat. What gives?
this may happen, if you accidentally turn on Auto Quantize for the track in the track editor, also "follow tempo and pitch" may cause it. Have you checked the settings?
As to your strange loop: is it a software instrument loop or a real instrument loop you are talking about?
If it is a software instrument loop you can look at it in the track editor and delete any extra beats that are revealed by looping. That sometimes happens if there are long notes at the end of the loop.
Léonie -
Hi guys, I downloaded this new iOS7.1 but it always fails to install. It says I am not connected to the Internet while I have all the network and second excuse it gives is that the software update is currently unavailable. Please help.
Hi Romantilizer,
Hook your phone up to iTunes on the computer you sync with and do your update from there. This is a robust iOS release, and doing it OTA is not always successful. I tried on my iPhone a couple of times, and it aborted the update twice. Did it via the Mac, and it was fine.
It takes a bit of time, so hook it up, make sure it is updating your phone, and then find something else to do for a couple of hours.
Cheers,
GB -
I updated my ipod on my computer to the ios 5.1.1 and it updated but all of the music, movies, and apps were cleared off. I cannot put any of it back on please help!
Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup. -
I have my brothers icloud account on my ipad and i want my icloud account back I have all my games from my acount but I can see his massages notes etc how can I get my icloud account back I tried so many things please help .???
go to settings and sign out his apple id in the sections i tell you:
1.game center
2.itunes and appstore
3.messages
4.icloud(delete acount;it wont realy delete it will only remove from your ipad)
5.facetime
and then enter your icloud in each and every section -
The description says it all. I bought a movie on iTunes but when I try to watch it plays back slowly with no sound. Then the video will speed up and the sound will work for a moment then off again and back to slow motion. I have a dell laptop running windows 7
Hi Normanwh,
If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Regards,
- Brenden -
I am working on big project and in accidentally flatten the file and i saved it as PSD in then I exited Photoshop. the next time when i open the file it is merged on one page. please help!
Flattening and merging are very similar. The main difference is merging keeps the transparent areas, whereas flattening removes all transparent areas by giving it a white background. A good example of flattening is a jpg image.
Since you have closed the file by closing photoshop, that means that the history is now gone, no way of undoing.
So that leaves you with two choices.
You can either recreate the whole document.
Or you can make selections of areas you are keeping and moving them one at a time to new layers. Keep each object on a separate layer. Then redo the area behind those objects. -
I rented a movie from itunes(The Untouchables), and it won't play. It lets me click on it but then is just black and won't play. I saw that I was billed for it. What should I do?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
Maybe you are looking for
-
Uploading Data from R/3 to BI7
Hi, weather am asking correct or not i don't know ,am very new to BI. To upload data from R/3 to BI weather we need to install separate R/3 system. or In my Bi7 itself i need to create one more client and from their i need to upload data to BI. Ple
-
I can't open a document in iPages. Says I need a newer version of iPages.
How do I open password-protected document?
-
How to used BAPI_SALESORDER_CHANGE to add items
Hi, I am trying to use the above bapi to add items to a sales order, but I can't get the qty to map across. I had the same problem using the create bapi whcih I resolved by populating the schedule tables, but in change this just causes an "unhandled
-
Gen Photo (Private Collection) vs CustomPanel_allWidgets
I'm very new to scripting for bridge and trying to get my head around it. I've grabbed some reference material and I was wondering if someone can tell me why when you copy the Gen Photo and CustomPanel XMP examples into the XMP folder only the Gen Ph
-
Why can't I Click and Drag?
Yesterday I was clicking and dragging items on my desktop, but today I can't. I can select them but I can't move them. How do I fix this? I have a Macbook Pro, 10.5.8