My iPad2 to iOS 8.0.2 and still have no cellular service
my iPad2 to iOS 8.0.2 and still have no cellular service
Hello ahafromnj,
Thanks for using Apple Support Communities.
Please follow the troubleshooting in the support article linked to below to help resolve this issue where you are seeing "no service" on your iPad.
If you see No Service in the status bar of your iPhone or iPad
Take care,
Alex H.
Similar Messages
-
HT6154 updated to IOS 8.0.1 and I have no more service
Just did the update and my Iphone shows "No Service"
Hey Bergonzoli,
Thanks for the question. We have released iOS 8.0.2 which should resolve your issue:
Loss of cellular service or ability to use Touch ID after updating to iOS 8.0.1 on iPhone 6 or iPhone 6 Plus
http://support.apple.com/kb/ht6487
Thanks,
Matt M. -
On the same wifi network, third generation ipad, iphone4s and MacBook Pro work just fine. The ipad mini often can not connect with the mail server and seems to hang a long time trying to open a web page. Had I known the mini had this kind of difficulty on wifi, I would have reconsidered my purchase. I have tried resetting the network and renewing the lease on the mini in addition. To completing the most current iOS upgrade. Still poor wifi performance. Unacceptable, in my opinion.
Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
i have an iphone 4s and have upgrade to ios 6.1.1 and still have issues with network and 3g. please help
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Hi! I have an iPhone 4S with iOS 6.1.3 and I have iTunes 11.1.3.8. on my Windows 8. Now I can't sync my iPhone, because the device is not recognised by iTunes. Somebody have any idea why, or what can I do (except refresh the iPhone software) ?
Hi Drazse,
Thanks for visiting Apple Support Communities.
If your iPhone is not recognized by iTunes for Windows, the troubleshooting steps in this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
Ios 6 on 4s and now have duplicate and merged contacts
updated to ios 6 on 4s and now have duplicate and merged contacts how do I resolve?
I have a number of clients who have this issue since the iOS6 update (as do I on my personal iPhone). These are the steps I took. The combination is that they were using iCloud / iPhone with their contacts.
Log into www.icloud.com and see if you have any duplicatesI had no duplicates here
Check Outlook (if you use this) to see if you have any duplicatesI had no duplicates here
On your iPhone check to see if you have duplicatesI had duplicates here
On my iPhone, I went to Settings, iCloud, and TURNED OFF the CONTACTS switch. Then it asked me if I want to keep my contacts on the phone... In my case, I did not as I know all of my contacts are stored in iCloud as I've confirmed that in STEP 1 & 2.
In your iPhone, check your Contacts, it should be empty.
Go back to Settings, iCloud, and TURN ON the CONTACTS switch. This will redownload all of your contacts from iCloud without the duplicates.
I hope this helps as this was kind of annoying as there was no reason for my contacts to be duplicated as I did not choose to integrate using the Facebook option. -
I bought an iphone 5 where the warranty goes up to May 2014. On 22/02 I did the update of iOS 7.0.6 and the same was without service. The model is the A1429 which has no assistance in Brazil.
How should I proceed?
thank youTake it back to Apple in the US where the iPhone originated ,any Apple Store genius bar will look at it under warranty
-
Update my iPhone 5 to iOS 7 days ago and still neither my iMessage nor FaceTime will let me log in and I am only spastically getting even normal texts. Does anyone now how to fix this issue?
ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367 -
I have an Ipad first generation with IOS 5.1.1. and I have just got a new ipad mini. Should I use the back up copy of the old Ipad from Itunes to configure the new one, or it is better to configure the new one from scratch?
Contrary to the opinion above, I see no reason whatsoever why you can't set up the new iPad from the backup of the old one. Obviously you will have app updates to make and complete and that sort of thing, but if you want to retain all of your app data and device settings (some of which will change because of the updated iOS), I would certainly restore from the backup first.
If you find that to be problematic, you can always start all over again. -
My sister has an iPad with iOS 6.1.3 and I have an iPod with iOS 6.1.3 also why does she have Siri and I don't?
Siri requires a 5th generation iPod Touch. Yours appears to be a 4th generation.
-
iPad 2 froze while updating iOS 7.0.4. When connected to PC & iTunes get the message in recovery mode, must restore. I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.
Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
http://osxdaily.com/2010/12/04/ipad-dfu-mode/ -
I have my iPhone setup so I can also get all of the iMessages that my daughter sends and receives on her iPod. The problem is that if I read the message first then it doesn't show up as a new message on her iPod and therefore she doesn't know that a message was sent. Is there a way that I can get my daughter's iMessage on my iPhone and still have it show up on her iPod as an unread message? Any ideas from anyone will help. I can't figure it out
HI,
I am not sure that I can really add anything to to this.
Apple used the phrase "sync" when saying what Messages on the Mac would do in regards to showing iMessages that were going to iOS devices.
It took to OS X 10.8.2 and iOS 6 to get as close as we have right now.
At best it looks like "Sync" means "Display on all Devices" and not much more.
The Mac version implies it will do more as there is a setting to notify people by return that you have read the iMessage.
The iOS devices have a similar "Send Receipts" item in the settings.
However actually reading an iMessage on one device seems to bear very little resemblance to anything that happens or can be seen on another device.
It seems for most people reading an iMessage on one device shows nothing at all on another device (the presumption being it arrives all places at the same time)
Your post is the closest I have seen to someone suggesting that it can be different on different devices.
You also seem to be implying that there is almost a time difference it the time your iPhone gets the iMessage and the time the iPod touch gets it.
I have certainly seen the "silent arrival" of iMessages on both my iPhone (when my computer and Messages is On) and on the iPhone if the conversation started on the Mac.
The Mac end will show both "Sent" and Received sides as it "Syncs" the conversation and beeps the alert sound for the Received part and the iPhone will remain silent.
Even "talking it through" like this in this post I am not coming to any real conclusions about what to try.
I am not even sure what to suggest to test for things to look out for.
10:13 PM Monday; January 21, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Trying to download ios7 to new iPad mini. Has been "downloading" overnight and still have gotten no where. Ideas?
Hi Rbfinke.
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Cheers,
- Judy -
I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?
http://support.apple.com/kb/HT1449
Maybe you are looking for
-
How to display Session value of an item using Javascript?
Hello All, I have a file browse item and I browse some file and click on upload, i run this javascript : function passBack() javascript:doSubmit('UPLOAD'); alert('hi'); var var_flag = $x('P91_FILE'); alert(var_flag.value); opener.document.forms["wwv_
-
Your current internet security settings do not allow data copying to clipboard
i get a message when i try to hit the Copy button at the end of the chat to try to copy the chat your current internet security settings do not allow data copying to clipboard how can i fix this
-
How can I config to create an out-of-box jms queue
Hi All, I am new to WebLogic Server and I need to create an out-of-box jms queue for my project, which means instead of creating and configuring the queue at the administration console, I'd like to program and change some configuration files to achie
-
Count out of pulse train on 6025E,labview(pc)
hi!! I need monitoring continuos count out from puse train on mine 6025E Thanks for all
-
Media browser will not load iphoto
Hi My pages media browser will not show my iphoto pics. It shows my files from garageband, but not iphoto. I tried dragging iphoto into the iwork folder and I also downloaded the ilife support 9.0.3 which was recommended in another post,but neither w