My Ipad2 was working fine until i did the update this morning. Now all my internet connections are Very Very slow.

the icloud was not able to update because my information was different than apple.

now that i cleared up the icloud problem, how to i redo the software update?

Similar Messages

  • HT1459 I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now.  thanks itunes; it was working fine until i did the update you said i needed.  what do i do now??????

    I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now.  thanks itunes; it was working fine until i did the update you said i needed.  what do i do now??????

    No one here said anything about an update or your device needing it.
    FYI, you are not addressing Apple here, we are all users like yourself.
    If the device is in recovery mode, the only option is to restore it.  All data on the device is gone.  This should not be an issue if the device has been used as designed and regularly synced/backed up.

  • My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    - Charge the iPod for half an hour.  Then reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
    - If still problem, place the iPod in recovery mode and then try to restore the iPod.  For recovery mod see:
    iPhone and iPod touch: Unable to update or restore

  • Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an erro

    Hi there
    I ha
    Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.

    Shame you had the iPhone hacked as  O2 usually unlock their customers iPhones happily.
    We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
    However hint ....you have probably trashed it

  • IPhone 4S goes back to homescreen everytime I sign into email everything was working fine until I did all the updates I am really frustrated

    iPhone 4S keeps going back to home page when I open email everything was fine until I did all the new updated I am very frustrated, can sny one help

    Have you reset since the upgrade? Hold down the sleep/wake button along with the home button until you see the apple, then let go.

  • My ipad2 was working fine until i upgraded to ios5, after that its battery effeciency got droped , plz can somebody help.

    Ipad2 battery effeciency got affected after my ios upgrade to ios5, please help

    Hi!! To add more to the issue, the other day, my airport card is nowhere to be found. It now says no airport card installed which is really crazy. I also noticed that my MBP freezes during start up and I had to zap the PRAM so it would open up. Anyone there who experienced the same thing? I'd really appreciate your suggestions. Thanks!

  • I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the  same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

    I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

    This is covered in the basics section.
    A restore loses nothing.
    A restore does.  If you are using the iphone as designed, then everything should be on your computer.

  • Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    After the restore did the phone work properly for a while? Say, a day or so?
    If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
    If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
    Good luck

  • A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

    I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
    Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
    Nick M.

    Hello,
    Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
    As for holding Option and Alt, the internal drive did not show up.
    And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
    Is there anyway I can use Terminal to help reach the internal drive?
    I realize I am asking a lot of questions.
    And I thank you for your time,
    Nick M.

  • I keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

    i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

    I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
    that's an odd sort of a message (or series of messages).
    hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
    try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
    Using MSCONFIG to troubleshoot conflicts in Windows
    does QT open without the strange message after the selective startup?
    does iTunes launch properly?

  • My iPod was working fine until I finally

    My iPod was working fine until I finally decided to update the software. After i did this, it told me to update my firmware by plugging it in. I did, and then when I unplugged it later on, every song on my iPod was gone. A few days later, I plugged the iPod into my computer and all the songs magically came back on it, even the ones that were not backed up on the computer I plugged it into. It worked fine for a couple of days, but this morning when I tried to play a song, it kept lagging and would struggle, making some clicking sounds (not continuous ones like when a harddrive crashes, just occasional ones like it was having trouble reading), so I reset it. When I started up again, I got the sad iPod icon. I have since tried everything in every relevant support article I could find. I tried the 5 R's, and I also put it into disk mode (which it finally did, after much lagging), but still my computer would not recognize it, even after reinstalling iTunes.
    Basically, what it comes down to, is I cannot restore it, because I cannot get my computer to recognize it. It has always worked fine on this computer -- in fact, I never had a single problem with my iPod until I tried to update the software. I guess I learned, 'if it ain't broke, don't fix it' - but how can I ever get my iPod to work again? Please help me!

    Hi jaded99, Welcome to discussions, I trust you found the correct iPod forum if not here is a link. Bob :~))
    http://discussions.apple.com/category.jspa?categoryID=146

  • My iPad was working fine until Tuesday night. On that night the Facebook icon want work. I click on the icon and it goes to a white blank screen then right back to the home page. I have deleted it and put it back on, also turned it off and it still want w

    My iPad was working fine until Tues. Night. I went to go on facebook and it shows a white page like it is coming on the it goes back to the home page. I have turned it off, deleted Facebook and put it back on but it still does the same thing. What can I do?

    Morning DeeHutton,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Best of luck,
    Mario

  • I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

    I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

    It could be that there's a new source of interference.
    Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
    http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
    By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

  • My ipad2 was working fine last night, but this morning is unable to connect to ANY wifi networks (though it can detect them).  All typical solutions fail.  What can i do?

    My ipad2 was working fine last night, but this morning when I woke it up... it no longer was connected to my network.  While it can detect networks, it cannot connect to any (have tried at home and at work).  I have tried: resetting router, resetting ipad, forgetting network, renewing lease on network, ensuring airplane mode is off, resetting network settings, turning wifi on/off.  None of the typical solutions I can find online seem to work.  HELP!

    You've gone through all of the basics. You might look at this document regarding potential issues with wi-fi environments. 
    http://support.apple.com/kb/HT4199
    If none of that works, and if a device restore doesn't work, it's time for a trip to the Genius Bar. 

  • My itunes was working fine untill i tried to download the most current version of itunes. now it wont boot up and has error messages,error7(windows error 126) and MSVCR80.dll

    my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for