My ipad2 went from 70% power to 1%

in  a couple of hours yesterday.  Now it wont charge.  I have tried the reset - but its stuck at 4%  for 16 hours using an ipad charger.  Still has IOS6 on it.  Anyone help??

try this
open itunes and connect just the cable to the computer. dont plug the device in,
turn off the device
hold the home button and plug it in.. keep holding the home button until itunes shows up on the device.
Then itunes on the computer will say detected device recovery mode.. restore it and then on the device you want to set up as new

Similar Messages

  • My ipad2 crashes when it is removed from the power supply. It  can't be reset?

    My ipad2 crashes when it is removed from the power supply. It can't be reset? Doesn't respond when plugged into my pc?

    Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
    No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
    What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
    If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
    Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
    thxs!
    cheers
    rOot

  • Monitor went to save power mode

    hi, i have a ibm netvista 8306, i loaded in win xp, but lost my drivers but the main problem i have is that i installed the correct graphics driver for this desktop comp. but when i restarted the comp. the comp. went onto save power mode, icant seem to do anything as the keyboard fails to work and i seem to be stuck with this message, after about 5 secs. the screen goes blank...can anyone please help me is there a reset button ?...will reinstalling windows fix it ?
    if anyone can tell me how to fix this i would be very gratefull....
    thanks ppl..

    This from an earlier post by Wonkanobe:
    Quote
    looking for 28a 35a and 16a 3.3 5 and 12v
    So, you want at least 28a for 3.3, 35a for 5, and 16a for 12v rails, according to Wonk, who runs the same PSU that I do...and for a reason. ANd since you're running a TI4200, you'll probably want more.
    Yours:
    +3.3 V 20a
    +5v 33a
    +12v 15a
    I've got 30 years in the business, and I'm not making this up. Your symptoms are just like those who have had underrated supplies and have fixed them by replacing the PSU. You are also in danger of wrecking your RAM, by the way, which costs much more than a PSU.
    Don't know why you reported a problem if you don't want to even consider the advice, or avail yourself of the painstaking research I did.

  • My iPad2 went blank. Troubleshooter says driver software MTP USB problem, what do I need to do?

    My iPad2 went blank. Troubleshooter says driver software MTP USB problem, what do I need to do?

    iOS: Resolving update and restore alert messages
    For error -50: See error 13 and 14: 
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    Try using this article to help with your iPad not showing up in iTunes---
    http://support.apple.com/kb/TS1538     -This deals with the device not being recognized in iTunes for Windows
    The following steps work well with iPod but i would try them for help with your iPad issue:
    Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
    Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
    If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain.

  • My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened?

    My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened? Or how to prevent it from happening again? Thankfully I saved a backup project of the 190MB file size.

    warp stabiliser?

  • IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

    1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
    2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use, 
    3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
    4. After  5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
    5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
    6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
    7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
    8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
    9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
    10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
    KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

    "I get the feeling that this is a software issue that could probably be solved quite easily"
    Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
    !http://i50.tinypic.com/izvwo1.gif!

  • Power Query; How do I reference a Power Pivot table from a Power Query query

    Hi,
    It's pretty awesome how you can define Extract Transform and Load processes within Power Query without having to type in a single line of code. However how do I reference a Power Pivot table from a Power Query query to avoid me repeatedly accessing
    the same data source (CSV) file with a view to increasing performance?
    We are aware of the reference sub menu option with Power Query. However the new query created by the "reference" option still seems to refresh data from the data source (CSV) rather than just referencing the base query. Is this understanding
    correct? There does seem to be a lot of hard disk activity when re-running the new query which is based on a base query rather than a data source.  So we were hoping the new query would just need to reference the base query in memory rather than rescanning
    the hard disk. Is there any way to ensure that the reference query just rescans the base query in memory?
    Kind Regards,
    Kieran.
    Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

    Hi Kieran,
    This sounds like something to be suggested for a future release. At the present time, Power Query will always re-run the entire Power Query query when refreshed. The Reference feature is analogous to a SQL view whereby the underlying query is always re-executed
    when it's queried, or in this case refreshed. Even something like using the Power Query cache to minimise the amount of data re-read from the disk would be helpful for performance but the cache is only used for the preview data and stored locally.
    It would be a good idea to suggest this feature to the Power BI team via the feedback smiley face.
    Regards,
    Michael Amadi
    Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
    Website: http://www.nimblelearn.com, Twitter:
    @nimblelearn
    Hi Michael, 
    Glad to hear from you about this.  And thanks to Kieran for bringing a very good valid point to debate. Will be glad to see this in future release. 
    - please mark correct answers

  • I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password

    I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password

    This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
    Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved.

  • My library has went from thousands of songs to 60 and i dont know why, any suggestions how to get these back?

    My library has went from thousands of songs to 60 and i dont know why, any suggestions how to get these back?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • Lost a 2 hard drives, have 7 k photos on a touch that I need to load on IMAC with a new hard drive, how do I do it.  Just never went from a Touch to iMac.  I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!

    Lost my hard drive and also an Ipad, but have 7 k photos on a Touch that I need to load on fixed IMAC with a new hard drive, how do I do it. (There were more photos than the 7k, but they were saved on other drives, thank goodness).  7K pohotos on the Touch are no where else, must be saved!  Just never went from a Touch to iMac.  I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!  New Aperture and IPhoto on IMAC with no other photos loaded on the new hard drive yet.

    I'd ask in the iTouch forum where there are more iTouch users there than here and they should know how to off load the photos.  It might take a 3rd party app. 
    OT

  • I need to pull a hard drive from a power mac g4 what enclosure will work?

    I need to pull a hard drive from a power mac g4 what enclosure will work?

    Hello,
    You need one that can handle IDE/PATA drives, they're getting hard to find, but it looks like these might work...
    http://www.newegg.com/Product/Product.aspx?Item=9SIA2C50UN6113
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817707196
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817388002
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817366005

  • How do I transfer music and photos from my Power Mac G5 to my new iMac. Have an old FireWire but it does not fit the new iMac

    I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.

    You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
    Format the drive info here.
    Backup and restore info
    https://discussions.apple.com/message/16276201#16276201

  • What is the best way to transfer files from a Power PC G4 that has NO power?  Thanks.

    What is the best way to transfer files from a Power PC G4 that has NO power?   I have a newer iMac. Thanks.

    Remove the hard drive and get one of these USB hard drive adapters. http://tinyurl.com/a5l2htj Then plug the adapter into your iMac to see/retrieve the files.
     Cheers, Tom

  • Overnight my contact list went from 1492 contacts to 52.. With help from Apple support I retrieved all of my contacts.  Here is the problem, I lost the groups.  None of my contacts are sorted into groups as they used to be which is very important for me.

    Overnight my contact list went from 1492 to 52.  With help from Apple I retrieved the missing contacts using Time Machine.  The problems is that the contacts are not in groups as they used to be.  Any suggestions?  I really need them grouped for business reasons.
    Also, there are no longer pictures associated with each contact.
    thanks for any help anyone can give me getting contacts back into the groups that I had established.  By the way, the group names are still there, but they are all empty.
    thanks,
    Sparky

    What Mac do you have, with what version of OS X?

Maybe you are looking for