My iPad3 had a 10-watt power adapter, Will it harm my device to use a 12-watt instead?

Will it harm my iPad3 to use a 12-watt power adapter instead of the factory recommended 10-watt?

No you will be fine using the 12 watt instead of 10.

Similar Messages

  • Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

    Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop?  Would like to use larger screen when working at home.  I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work.  When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer.  What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible?  Any assistance would be appreciated.

    quax88 wrote:
    11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
    11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
    This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
    Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
    Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
    So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
    When possibly infected e-mail files are found:
    Right-click/Control-click on either the infection or file name in the ClamXav window.
    Select "Reveal In Finder" from the pop-up menu.
    When the window opens, double-click on the file to open the message in your e-mail client application.
    Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
    If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
    If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
    To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

  • 45 Watt vs 65 Watt Power Adapter

    Does anyone out there know if you can use a 65 watt power adapter with a 800MHz iBook in place of the intended 45 watt power adapter without damaging the computer?
    I know the specs are 24 volts and 1.875 amps for the 45 watt adapter versus 24.5 volts and 2.65 amps for the 65 watt version.
    Your help is greatly appreciated.

    Davida444, Welcome to the discussion area!
    The wattage is different and your computer
    will run very hot - its like having a lamp that says
    use only 50 watt bulbs and you do a 75 watt bulb and
    eventually the thing shorts out.
    Your analogy is incorrect. In this situation it is
    more like having a car that can go 120 mph but you
    only need to go 65 mph. There is extra ability but it
    does no harm. In fact having the extra rating will
    mean that the charger runs cooler than the original
    one.
    I had to replace my 45w adapter and was told by Apple that a 65w one would work. Since using it, the battery icon has been slowly reducing in percentage. At first it was around 57% and although I only use the computer when connected to the mains, it now sits at 1% where it has remained for the last several days. I don't want to buy a new battery if the same thing will happen and I have noticed thatb the undrside of my laptop is getting very warm.
    Any advice is appreciated

  • I have a 2010 vintage 13-inch MacBook Pro that has a 60 watt power adapter.  I also have an older power adapter that is 65 watts.  Is it okat to use the 65 watt with this MacBook Pro?

    I have a 2010 vintage 13-inch MacBook Pro that has a 60 watt power adapter.  I also have an older power adapter that is 65 watts.  Is it okat to use the 65 watt with this MacBook Pro?

    yes.
    "For instance If you have a MacBook (13-inch Late 2009) that normally uses a 60W adapter, you can also use an 85W adapter with that computer. You would not use a 45W adapter with that computer; it would not provide enough power for that MacBook. Using an adapter of higher wattage than the adapter that came with the computer will not cause the computer to charge more quickly or otherwise operate any differently than using the adapter that came with the computer. "
    http://support.apple.com/kb/HT2346

  • Using my macbook pro whole day with the power adapter , will it affect my battery? Please help

    Using my macbook pro whole day with the power adapter , will it affect my battery? Please help

    It doesn't affect the battery. You can use your MacBook Pro plugged in all the time without damaging the battery. You only have to be sure that you unplug it and run a battery cycle (drain the battery without letting the Mac turn off and charge it fully) at least once a month to keep the battery life.
    If you want more information about your battery > http://www.apple.com/batteries/notebooks.html

  • TS2634 Can my iPad mini use the same 12 watt power adapter that the iPad uses?

    The small one-inch square power adapter that came with the iPad mini no longer works. A Best Buy employee told me I should be using the larger 12 watt adapter that comes with the iPad. I don't want to damage my mini by using the wrong one. Help?

    Absolutely no problem.  The device will draw only as much energy as it can safely absorb.  The 12W rating for the charger is maximum available power.
    I've been using a 12W charger with my iPod for about a year now.

  • Using Alu Power Adapter with The new MBP Unibody 2009 ? (Both 85 Watts)

    Hi,
    Can i use the Power Adapter off my Aluminium MBP 2.5 GHz,15" intel core 2 Duo (MacBookPro4,1), with the new Unibody 15" 2.66 GHz(MacBookPro5,1)?
    They are both 85 Watts.
    The Power adapter for Aluminium is :
    Input : 100-240V - 1,5A 50-60Hz
    Output : 16,5-18,5V, 4,6 A Max
    Delta Eletronic
    The Power Adapter for Unibody is :
    Input : 100-240V - 1,5A 50-60Hz
    Output : 18,5V 4,6A, 16,5V, 3,6A
    LiteOn Technology
    Thanks for The Lights.

    That's correct, I meant to type 85W.
    Can anyone advise what the impact will be of using older 85W adapters with the new MBP's that come with a 60W adapter?
    Is there a shorter battery life in the long-term, or is the new battery designed to cope the same with either of these power adapters?

  • HT2803 Where Can I buy a 90 watt power adapter?

    Can ayone advise me on where I can buy a 90 W power adapter for a cinema display?

    You are welcome.
    So, you probably need this creature?
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=21 75cca78c8e200537f672f59434878806a5c73fc5…

  • MagSafe Power Adapter will not power my computer.

    This just happened today. June 2nd.
    My power adapter the thing you plug into the wall to give you macbook power
    just gave out. It is not feeding my computer power.
    I am not sure why but it now working.
    It is almost a year old.
    I should have warranty on it.
    Help please.
    thanks.

    My wife's Macbook (white 13") just had this same issue. Started last night. Her battery got low, she plugged in the computer and it wouldn't charge (light turned green on the power adapter). The battery icon in the upper right bar shows an X through it.
    I attempted to reset the SMC to no avail:
    http://support.apple.com/kb/HT1411
    I was hoping the issue was with the battery, so I shut down the computer, removed the battery and swapped batteries with my White 13" Macbook. I plugged in both machines and my mac (with her "bad" battery) started charging, while her mac (with my good battery) refused to charge and still showed the icon with the X.
    Now I'm worried there's a bigger issue here, such as with the logic board.
    Her mac is at 10.4.11 and has the 1.3 battery update installed.
    I'm going to make an appointment at the Apple store today. The warranty on this machine expired on Friday.
    I just love how this problem keeps happening almost right after the warranty runs out.

  • Mac Book Pro 17" 85W Power Adapter too Hot to handle while charging/using

    Hello All,
    I bought a Mac Book Pro 17". What's up with my Power Adapter when I am using the computer at the same time charging it. The Power Adapter gets so hot that it is too hot to handle...very very hot! Is this normal ?
    Any advise is most welcome on the matter.
    Mac Book Pro 17"   Mac OS X (10.4.9)  

    Simple answer, no its not normal
    The adapter should get warm, but not hot
    The first thing i'd do is try it in a different power socket
    If it still heats up like you say regardless of where you plug it in, then its a fault in the adapter
    return it to apple or an apple reseller and get another one
    i wouldn't use it any more as it could be dangerous to your computer and become a fire hazzard

  • Had Power Adapter replaced, battery icon not showing charge

    Hello, hoping you guys can help me out. Recently, my power adapter had burned out (wouldn't show charge/light up at all). I've had it replaced as of today and is working fine (Whoo!), but now a new problem's come up.
    I admit I used my battery to it's limit while waiting for the new adapter, and while the light on the adapter is green, the battery icon on my screen is showing 0%. Pressing the button on the battery only gives me one green light.
    I've heard something about Re-Calibrating the battery in my manual, but I'm unsure if that's the best course for my case. Here's my Power System Profile, if it helps:
    AC Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 5
    Dynamic Power Step: Yes
    Reduce Processor Speed: No
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Wake On Modem Ring: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Dynamic Power Step: No
    Reduce Processor Speed: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On Modem Ring: No
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 3775
    Remaining Capacity (mAh): 0
    Amperage (mA): 0
    Voltage (mV): 9821
    Cycle Count: 56
    AC Charger Information:
    AC Charger (Watts): 65
    Connected: Yes
    Charging: No
    Hardware Configuration:
    Clamshell Closed: No
    UPS Installed: No

    Re-calibrating the battery is typically done with a new battery, where you charge it all the way up, then run it all the way down a couple of times. This calibrates the battery's internal electronics to the actual capacity of the battery. Not a concern here.
    Looking at your battery stats, is your battery fairly new? It is showing 56 charge/discharge cycles, does that sound about right? Reason for asking is, if the battery is old, like maybe the original battery that came with the system, sometimes a dying lithium battery throws up screwy stats. If it is an older battery, that may be why it's not charging ... it's dead. However, if it is a newer battery ....
    There's only 4 components to the charging circuit - power adapter, dc-in card, battery, and logic board. You have a new power adapter, and the system is seeing the 65 watt power adapter, so the power adapter and dc-in card appear to be OK. That leaves either a battery issue or a logic board issue. Do you have another battery you can swap in, or a friend with the same model PowerBook, or an Apple store nearby? If you swap another battery in, and it starts charging, and the current batter is an older one, then replace the battery. I used this one on mine, and others have had good things to say about it: http://eshop.macsales.com/shop/powerbook/battery/g4-15inch-aluminum/ . I would stay away from batteries sold on ebay, as there have been a number of people very disappointed with the lack of quality in the battery they bought.
    If another battery won't charge, that would point to a logic board issue. We just had that on one of our PowerBooks, where it would charge, and it wasn't a power adapter, dc-in, or battery problem. The Apple store sent it off to the Apple Depot, for around $350, and they replaced the logic board as well as the battery. If they do more work, like replacing a dented case, the price goes up. If the Apple store replaces the logic board in the store, it costs around $750 or more.

  • Is a 60watt MagSafe Power Adapter compatabile for a MacAir?

    I have a 45watt Mag Safe Power Adapter for my MacAir.  I also have a 60 watt Mag Safe Adapter, and says on box, only for MacBook/Pro.  Can I use this for my MacAir??

    To quote from below linked article from Apple:
    "Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple notebook, you can use an adapter of a higher wattage without issue."
    http://support.apple.com/kb/HT2346
    Best.

  • Power adapter intermittent charging

    I have a late 2006 17" Mac Pro for which I recently replaced the power adapter. As recommended by Apple, I purchased the 85W MagSafe adapter with the "L" style connector. The original adapter had a "T" style connector.
    About two weeks ago, the adapter began to function intermittently: sometimes it would charge the laptop and sometimes it would not. Whether or not it was charging was clearly indicated by the small light on the connector. I took the laptop and adapter to my local Apple Service Provider to explain the situation and, of course, it functioned perfectly while at the shop. The technician ran a diagnostic on the computer and adapter and confirmed that everything was working properly.
    Nonetheless, the intermittent behavior continued. After a little troubleshooting on my own, I determined a pattern to this problem.  Here's what I found:
    1. If the computer is plugged in before it is booted up, the adapter charges.
    2. If the computer is running or asleep when the power adapter is plugged in, it does not charge.
    3. If the computer is plugged in (and not charging), and is then shut down completely and turned back on, the power adapter will begin to charge as soon as it boots up.
    4. If the computer is plugged in (and not charging) and restarted without shutting down completely, the adapter will not charge.
    Any ideas on how to remedy this situation? Resetting the Power Management Unit maybe?
    Thanks, Everyone!

    First of all, stop using the adaptor--it is dangerous and appears to be unusable now. Take a look at this article:
    http://support.apple.com/kb/TS1713
    Also read the linked articles.
    The argument that you will need to make to Apple is that the condition resulted from faulty manufacturing and not from user abuse. I think these situations are decided on a case by case basis. I think the earlier models also had a flimsier strain relief than the later ones, and these earlier ones were more prone to failure. If that's what you have, you may be able to make a case for replacement.
    Good luck!

  • All of a sudden even using the power adapter its only at 57% after 8 hours

    I have my powerbook 1.67ghz, its plugged in and i have a couple of adapters so i dont think it is the power adapter.
    it has been plugged in and only records 57% power. What does anyone think? it fluctuates between GREEN and AMBER light on the power adapter.
    On the back of the computer itself i see some green lights but i dont know what they mean.
    here are some of my stats: It says its NOT charging and its plugged in
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 3888
    Remaining Capacity (mAh): 2228
    Amperage (mA): 0
    Voltage (mV): 11798
    Cycle Count: 33
    AC Charger Information:
    AC Charger (Watts): 50
    Connected: Yes
    Charging: No
    please help
    thanks
    scott

    Hi, Scott.
    yes i am using the 65 watt power adapter...
    Not when you ran System Profiler and got the results you quoted above, you weren't — at least not if System Profiler can be believed. Set the 50W adapter aside and don't use it with the Powerbook. If your alleged 65W adapter is identified by SP as a 50W adapter, it needs to be replaced with a proper one.
    If you "really never use it unplugged," that may explain why your Powerbook is misbehaving. Powerbook batteries want to be used. If you don't completely discharge and recharge your battery every two to four weeks, its charge-level calibration will become very inaccurate, and it may lose capacity faster than it should.
    http://www.apple.com/batteries/notebooks.html
    http://support.apple.com/kb/HT1490
    If the plug on the 65W adapter fits your iBook (i.e., if it's an iBook G4 rather than a G3), test the 65W adapter to make sure it charges the iBook battery properly. (This will do neither the adapter nor the iBook any harm.) If it does, it's almost certainly not at fault. The other three components of the Powerbook's charging system are the battery, the logic board, and the DC-in/Sound card. Plug the 65W adapter into a wall socket that you know is reliable and not switched. Reset your Powerbook's Power Management Unit, following the instructions in this article for your particular model. Connect the adapter to the Powerbook and let it charge for twelve hours without turning it on. Post back to let us know the results.
    Other questions:
    How old is your battery?
    Was this battery supplied to you under Apple's replacement program for original PB batteries within a certain serial-number range? Many of the replacement batteries issued under that program seem to have been defective. They lose capacity very rapidly and prematurely (which yours hasn't done) and/or they refuse to charge even when they appear to be in good health (which yours may be doing). If your battery was supplied under the replacement program, it falls under greater suspicion.
    Message was edited by: eww

  • Inspire 2.1 2500 system power adapter

    Hi,
    I got and Inspire 2.1 2500 speaker set from someone but there wasn't a power adapter. The specs say that it uses a 12VAC, 2.9A adapter. Does anyone know if a regular 2VAC adapter from Radio Shack will work? Lofton

    I face a similar problem with my Inspire 2.1 3300. My right speaker--well, the speaker I put in the right speaker port in the subwoofer--has shorted out recently. I've had the system for around 2-3 years, and while I expect this to happen I would like to attempt repair anyway. I checked the connections at least fourty times, and yet this speaker is functional, breaking up, or very very quiet. I've moved the speaker cord around and found I can get some signal. I'm assuming this problem is in the speaker itself, after inspecting the woofer.
    Until my friend looks at it, I can't help you except agree on the situation. I'll get another post in here soon.

Maybe you are looking for

  • Can not re-size and move on screen keyboard on windows motion tablet

    I have some Tablets (Motion F5) they all have windows 7 pro installed. After a few windows updates last week the on screen keyboard (standard integrated) i cant customize the size anymore. also i cant move it to where i want on the screen. in the set

  • Connecting Epson Expression 636 SCSI scanner to Mac Pro

    I have an Epson Expression 636 scanner currently connected to a G4 867 Mirror Door via SCSI card. The G4 uses 64-bit, 33MHz PCI, so as far as I can I tell, no go for installing into the Mac Pro, which uses PCI Express 2.0 x16 or PCI Express 2.0 x4. I

  • How To Track the Errors For LSMW Idoc

    Hello Expert While working on Material Master Idoc getting an error message Error 51 Application not posted Details: IDoc included in IDoc packet containing an error: transfer it separately How do i tackle this Thanks

  • Errors in LabVIEW because Max is not ready

    I'm having an unusual problem with Max and LabVIEW. I need to have a LabVIEW program launch auotmatically on startup and run unattended. I put a shortcut in the Startup folder, use automatic logon, and generally things work. However, I have had some

  • Cloning of a LINUX with MAXDB problem

    Hello all, We cloned (copied) a complete Linux server (AAA) with SAP using MAXDB, target server was ZZZ. The copy was very successful, nothing missed. Edited the profile parameters and changed all ENVironment variables changing anything from AAA to Z