My ipad4 locks up when moving outside a wifi coverage

My ipad4 locks up when i move outside a wifi coverage. Then I have to do the two finger salute to wake it back up. Any suggestions?

Just fixed this, had exact same issue.
I had my camera connected to the crappy wifi app thing then turned off with it still going and it think it got stuck on the wifi settings.
Just plug in, delete the wifi settings under misc (there like 3 folders on root dir) then turn on wifi, it will wait 30~ seconds then reinsitialise
now i can get into settings and the whole menu
my guess some sort of bug with the wifi setting and when tried to open just crashed itself

Similar Messages

K8N Neo 4. Likes to lock up when moved

Have a very nice and stable Neo4 box, but about 50% of the time , just moving the case causes to system to freeze.
I would have to guess its some kind of short, but how to verify or fix it?
Has anyone else seen this kind of thing and figured out a fix?

Reseat the memory modules .
Make sure they go all the way down into their dimm sockets in the motherboard .
Or there could be another lousy connection of the gfx card or some drives thin sata cable .

ITunes Locks up when Library moved to NAS

I recently bought a Synology DS1511+ NAS in part to store my growing iTunes library. So I followed Apple's directions for moving my iTunes Library; changed the default library location to a share on my nas,then consolidate the library to have iTunes copy everything to the new location, and finally moved the library database files. However, After I would get done watching a movie, which would play fine, iTunes would lock up consistently when I would try to click on another section like music, aps, and ect... When I moved my library back to local storage no lockups. Does anybody have any ideas? I know more and more people are using a NAS to storage their iTunes Librarys, so I thought this would be pretty simple. I'm running Windows 7 64 with a 1 GIGBIT network connection to my PC and NAS.

If it works fine when the library is local but locks up when the library is on the NAS, that would indcate either problems with the NAS or the network.

Follow up on: Topic : iBook G4 800 MHz freezes when moved or bumped lightly

Last year I posted the following message, which has been fixed. Summary of repair at bottom of post:
Original message posted Aug 4, 2007:
"For the past several months my iBook G4 has been freezing when moved or bumped lightly. It has also occasionally done some strange things at startup. It sometimes will show just a grey screen and sit there. Sometimes the screen will do some sort of fade transition across the screen, going bright in a wave accros the screen and then to black and then nothing. Sometimes there will be vertical lines in the middle of the right side of the screen of various colors. And the last significant occurance is the occassional static in the display. These video symptoms always occur at startup. If the computer starts up to the desktop it will only freeze if moved or bumped lightly. The cursor sometimes can still be moved after the computer freezes.
I have done the following:
Clean install of OS (Tiger 10.4) with all updates and tested before updating. If have done this before and after wiping the drive clean.
I have removed the extra RAM, reseated the RAM, removed the Airport Extreme card, reseated the Airport Extreme card. I have chaged out the hard drive. I have also disassembled most of the computer to check for any other loose components. The only discrepency I have found was a crimped microphone wire, that is slightly damaged. The screen was replaced a few months after purchase when it had a close encounter with a hot wheel car of my son's. The computer is currently a little over three and a half years old.
I work on computers for a living, specialize in Macs, and have been using Macs since 1986. I am stumped. Can someone please shed some light on this issue by providing a different point of view than my own. Sometimes we need an outside perspective to solve some problems.
Thanks in advance for any help you can provide."
Solution provided by Apple:
I took the laptop to the Apple Store and sent it in for the flat rate repair, which was a little over $300. They had to replace the motherboard and some of the cable. The bad motherboard was causing video issues, freezing and startup difficulties. The bad cables were causing the freezing when the unit was moved. The laptop has performed exceptionally well since the repair and is still in use. Hope this helps other people out there.

As a guess it suggests to me that the leads on U28 need to be reflowed.
Mad Dog

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

LR4.2 - Error when moving files

I can repeatedly reproduce an error when moving files into folders within LR4.2.
My current folder structure is setup like:
F:\pictures\YEAR\Folder name\Sub folder\
When I'm moving files from "Folder name" to "Sub folder" I will be moving approx 6 - 20 photos at a time when sorting them into sub folders. After a while of moving files, LR will stop allowing you to move files and will show up the O symbol with a line through it. Until you close and re-open LR will it allow you to start moving photos again.
I've had this happen 3 times on me now and is completely reproducible. As above, move a small amount of files from a parent folder into a child folder repeatedly and eventually it will refuse to move any more photos until you restart LR.
Windows 7 x64 SP1 Professional
Intel Core i7 950 3.07Ghz
24Gb DDR3 Ram
Nvidia GTX470 Video Card
Intel 520 Series 240Gb SATA3 SSD
Lightroom 4.2 x64
Catalog recently optimised with no issues ever experienced with the catalog.

Hi,
I experienced the same problem and error message this morning ...and found that the following steps will resolve the error (at least when using LR 3 on a MAC):
(1) Open LR and rename all the files that you are trying to move by hitting the F2 button, (MAC shortcut)
(2) Look for any images that may have a '?' mark next to them and resolve if required. (The '?' indicates a file 'location' conflict within the catalogue, - ie you may have moved the files around outside of LR)
(3) While still within LR ....highlight all the files that need to be moved ....and drag and drop them into your preferred new location in the usiual way.
Hope this helps.
Cheers
Simon

Why does Final Cut V7 lock up when saving or rendering?

Why does FCP 7 lock up when I save anything. Just loaded it onto a new 27"mica. Can not save or render anything. Goes into perpetual pinwheel mode.
Just set up a new 27" iMac. Looks great, tools seem to work but...very frustrating can't save anything. I have 5 years expience with FCP...
what obvious thing am I missing here? HELP PLEASE SOMEONE! 0:

I moved a complete project file to the internal HD and it worked fine. This tells me that the
newer iMac will no longer support he USB.2 external HD dock that I've been using for the last 3 years.
I've found that keeping big files off of the internal drive keeps my computers running much
faster and with fewer "issues." I just ordered a Firewire external HD dock from OWC. This will
likely solve the issue I was having. They call this "progress." I just wan't the tools to last longer.
At least they're a lot cheaper than they were 15 years ago. : )
Thanks Michael
Hmm.. I remember I Michael Grenadier from New Rochelle N.Y.
What year did you graduate from high school?

Photos coming out darker with a white backdrop when taken outside

I am trying to take some photos of my product outside because the light seems to be better at picking up all the colors than when I've taken them inside but now when I'm taking the photos with the white backdrop they are coming out darker than when I had the backdrop painted lime green. I took the photos at 8am right when the sun had the backdrop lite up the most I live in Florida for time zone questions. the other photos where taken at 9:30 and they came out a lot better but had a glare in them.should I go back and paint the backdrop green again or have any other ideas. PS I have adobe Photoshop elements 9. any idea on how to take out the glare in a photo when taken outside. and is their a website that can tell me when the best time is to take an outside photo in my region

cory moon wrote:
think you for all you help but one thing im still confused about is northern light. does that mean to have the item placed to the south west to have the sun to the north of the item?
Northern light means that the only light falling on the product is coming from the North sky (in other words, your product is in the shade of the house). Specifically for your speargun products, your setup will be like this:
Get a medium gray background larger than your spearguns. This is especially important if some of the guns are camouflaged. If you can't find a cloth backdrop from a photo supply house, look in some fabric stores. If not, then get a couple of 30in. x 40in. sheets of matte board from an artist's supply store.
Place the product and background in the shade of your house, waiting until the shadow of the house is long enough so that your camera will also be in the shade. (A side benefit is that you'll be cool. )
Put your camera on a tripod.
Set the camera and tripod in the middle of the speargun, moving the camera back until the complete speargun is in the picture when using a "normal" focal length lens. You can slightly decrease the focal length to the wide angle setting if necessary to get the whole speargun in the picture, but be aware that the more wide your lens is, the more the product will be distorted.
At that point, you should be good to go. Let the camera use its automatic everything to take the picture and it should look good. If you want, you can also experiment with a couple of shots using flash as a fill-in light, but that might cause some glare off parts of the speargun.
The photos will have two things happening that slightly complicate matters:
Northern light will be bluish because the light source is the blue sky. That blue cast will be over the entire image, so you can quickly and easily use PSE to remove the blue cast because you won't have to select anything -- just remove the cast from the entire image.
Depending on what you use to support the speargun on the background, you might get shadows, etc., and want to then separate the speargun into its own image with a transparent background. Using a gray background will make that process easier because selecting the gun will be a snap.
Hope that's not too much info to absorb....
Ken
P.S., Depending on what the original colours are, you can easily use PSE to "pop" the colours before saving the images as PNGs for the Web.
Message was edited by: photodrawken to add a PS.

Ibook shuts down when moved

When moving it will sometimes shut down when put down ever so gently. Any suggestions?

Hey chaz and Welcome to Apple Discussions,
When moving it will sometimes shut down when put down ever so gently
It would help to know exactly which iBook we're talking about here, speed and size.
In general, if you're only on battery power when this happens, I would check the battery lock they can get loose and need tightning. Dirt/corrosion there can also cause this symptom.
Also the battery interconnect board, Corey Arnold problem U28, possible short in the inverter cable.
Do some more diagnostics; move the display, leave it on with the display flat on the table an the lower section up, pull the power lead and try to disturb just the battery.
Post back.
Richard

Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick?

Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick? I have to Relaunch the Finder to get it working again.
Background / other symptoms:
The Flash drive in question has been formatted HFS.
I get no error messages, including on the Console, and no sound indicators.
I can copy files, using the Finder, from a hard-drive to the usb flash drive with no problem.
Finder copying on this stick works just fine on my other Mac.
I can move files within another (FAT32-formatted) USB flash drive.
The quirky USB HFS Flash drive works fine on my other Mac.
Outside of the Finder, I can use mv just fine to move the files on the HFS flash drive.
If the HFS-formatted Flash drive were faulty, I would at least expect some sort of error in the Console app, but perhaps not from the Finder.

Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick? I have to Relaunch the Finder to get it working again.
Background / other symptoms:
The Flash drive in question has been formatted HFS.
I get no error messages, including on the Console, and no sound indicators.
I can copy files, using the Finder, from a hard-drive to the usb flash drive with no problem.
Finder copying on this stick works just fine on my other Mac.
I can move files within another (FAT32-formatted) USB flash drive.
The quirky USB HFS Flash drive works fine on my other Mac.
Outside of the Finder, I can use mv just fine to move the files on the HFS flash drive.
If the HFS-formatted Flash drive were faulty, I would at least expect some sort of error in the Console app, but perhaps not from the Finder.

Unlock iPhone when moving?

Hi to all,
I would like to know how an iPhone 3G can be unlocked if I move from canada for a prolonged period. I would like to keep use of my iPhone in another GSM and 3G compatible country. I know that in some countries such as Canada have bound carriers with iPhone 3G and I agree (although it's useless in Canada since there are only 2 GSM carriers who both have iPhone 3G), but it seems that no Apple Store her sells the device with a contract but without lock, nor does Rogers or Fido (They sell it without contract but with lock).
The rationale being that when moving, one could resell its contract and keep the (wonderful) device.
Of course I prefer to stay within Apple's supported means to do it.
Thanks for help

Then I still have hope to give some of my money to Yessim.com, or Turbo SIM, just to get a functional iPhone, hoping that Apple won't put out a firmware that will fill the breach that rendered the hack possible. The most problematic part staying Rogers' astronomical rates on data, which cannot be circumvented.

Xorg/radeon/i3 lagging when moving between monitors

Hello, I just did a fresh install of Arch on my desktop, and I'm trying to get triple monitors working. My setup is:
1 x DVI-D on R9 280X (primary display = DVI-1)
2 x DVI-D on HD 5770 (left display = DVI-1-2, right display = DVI-1-1)
All monitors are identical 2560x1440 (QNIX QX2710) monitors. I'm using the open source drivers (radeon) drivers, and testing this on i3 (the WM i plan to use). I tried doing this with cinnamon, however I could only get 2 screens going at once, primary and another on the 5770.
in order to get all the monitors enabled, once i3 starts up i open a terminal and run:
xrandr --setprovideroutputsource 1 0 && xrandr --output DVI-1-2 --preferred --left-of DVI-1 --output DVI-1-1 --preferred --right-of DVI-1
This line enables all monitors, which I thought meant it was good. However, it lags. Specifically, it lags when moving mouse from center screen to either of the side ones. It completely locks up for 3-5 seconds, but then it catches up. However, it doesn't seem to lag when I move from one of the side displays to the center.
xrandr doesn't see the monitors until i run --setprovideroutputsource, and it seems to crash my xorg if I setup right screen, then the left screen.
I read online that trying to force accelmethod to exa in xorg.conf.d/ might fix it, however that didn't work. Otherwise, I've read again online that glamor is the cause of this issue. What should I do if that's the case?

Hi ,
I am having the same issue as your reported, but I am on different hardware, so I suspect it is an issue with something else. I think these posts are similar so watch them:
https://bbs.archlinux.org/viewtopic.php?id=139193
https://bbs.archlinux.org/viewtopic.php?id=140572
The system I am having an issue with was built via a derivative of ArchISO scripts and installed onto a machine. I don't believe that alone is the issue, but initially I did think it was something wrong with my scripts / configuration. I merged my /etc of a working system with the one in question and it still does not work.
I looked very briefly at the Xorg logs and noticed that it wants to autodetect input devices, perhaps that could be an issue. The other oddity I noticed is that I still cannot use slim / xfce. Initially I built the system to primarily use that window manager to save resources, but even after unplugging devices and logging in, I would get booted back out.
I will look into Xorg to see if there were any changes with auto-detection as well as udev. Perhaps one of those things is causing an issue.
Walter

Lock tables when load data

Are there any way to lock tables when i insert data with SQL*Loader? or oracle do it for me automatically??
how can i do this?
Thanks a lot for your help

Are there any problem if in the middle of my load (and commits) an user update o query data ?The only problem that I see is that you may run short of undo space (rollback segment space) if your undo space is limited and the user is running a long SELECT query for example: but this problem would only trigger ORA-1555 for the SELECT query or (less likely since you have several COMMIT) ORA-16XX because load transaction would not find enough undo space.
Data is not visible to other sessions, unless, the session which is loading data, commits it. That's the way Oracle handle the read committed isolation level for transaction.
See http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96524/c21cnsis.htm#2689
Or what happens if when i want to insert data someone has busy the table?You will get blocked if you try to insert data that has the same primary key as a row being inserted by a concurrent transaction.

Lock Code when turn on - 5800XM

When I had v40 I had to tenter the Lock Code when I turned the phone on (something I did rarely so no problem).
When I updated to v50 it doesn't ask for the Lock Code now. Any one know how I can set this to happen please?
Mark

I tried to paste something from the extended user manual, but it looked weird on the screen, so I've tried to make it look sensible. I hope the following does the job:
Select Menu > Settings and Phone > Phone mgmt. > Phone and SIM card. PIN code request — When active, the code is requested
each time the device is switched on.

PSU causing lock ups when gaming? K9A2 Platinum

I am having black screen and occasionally grey screen lock ups when Im playing games. It can happen within 10 minutes or up to an hour. I have to press the power button to restart and dont get any windows errors or blue screen. I have no issues when watching videos or just tooling around. My PSU is a OCZ600MXSP and Im thinking its not up to spec. I have everything running stock. Is it likely my PSU doesnt cut it or is the black/grey screen freeze thing an cpu/gpu overheating issue?

All of my drivers are up to date (I do use driver sweeper as well). It happens pretty much in all games, from BFBC2 and TF2 to some crappy kid game my son plays online (Wizard 101?). Im not sure what the temps are under load but at idle they are good (cant recall what exactly they were but were in the proper temp range). My monitor has just finally died as Im typing this on my laptop (bad caps on power board ) so Ill test the temps while gaming when I can hook it up to my big LCD.
Could the lock up with no blue screen/error report indicate a component overheating?

My ipad4 locks up when moving outside a wifi coverage

Similar Messages

Maybe you are looking for